|
i don't think having 2 forms is a good idea.
maybe you can set the Alpha property of the image by defining System.Drawing.Imaging.ColorMatrix something like:
float[][] matrixItems ={
new float[] {1, 0, 0, 0, 0},
new float[] {0, 1, 0, 0, 0},
new float[] {0, 0, 1, 0, 0},
new float[] {0, 0, 0, xxxf, 0},
new float[] {0, 0, 0, 0, 1}};
System.Drawing.Imaging.ColorMatrix colorMatrix = new System.Drawing.Imaging.ColorMatrix(matrixItems);
where xxx is the desired alpha value. its a float between 0 and 1. Now create an image attrbute:
System.Drawing.Imaging.ImageAttributes imageAtt = new System.Drawing.Imaging.ImageAttributes();
Finally, draw the image using the DrawImage function of a Graphics object you have created from your pictureBox, panel, etc. to which you pass the ImageAttributes object you've just created
there are no facts, only interpretations
|
|
|
|
|
So, I get a type and I want to check to make sure it supports +, say, and then use it. But operators don't show up for Type.GetMembers() or for Type.FidMembers() or for Type.InvokeMembers(), at least as far as I can tell (and I did make sure I was looking for STATIC members), unless I am doing something wrong. So how do I get at these elusive operators?
"In a mad world, only the mad are sane."
|
|
|
|
|
This works for me.... The following is the operator code.
class TestClass
{
public static TestClass operator ++(TestClass tc)
{
// do work here
return tc;
}
}
The following is the reflection code....
TestClass tc = new TestClass();
MethodInfo[] methods = tc.GetType().GetMethods(BindingFlags.Public | BindingFlags.Static);
this way also works...
TestClass tc = new TestClass();
MemberInfo[] members = tc.GetType().GetMembers(BindingFlags.Public | BindingFlags.Static);
|
|
|
|
|
Ah, indeed. Yeah, I was doing basically that. The difference was I was doing it in general, and passing in a primitve, for which it evidently does not find operators. Not sure how to get around that problem.
|
|
|
|
|
So apparently with primitives the operators are completely built in. This would make sense, since they are in every other language, but somehow one assumes everything will work the same way as the in C#.
So, I suppose I can just check if the object is a primitve that would support the operation I want in addition to checking the supported methods. I looove special cases 
"In a mad world, only the mad are sane."
|
|
|
|
|
ok i know i can use the method below to find a record using a prime key how do i search on a key that is not a prime key i am useing both sql and foxpro databases
conn.Open();
string search="someString";
OleDbDataAdapter da = new OleDbDataAdapter("select * from test",conn);
DataSet ds = new DataSet("test");
da.FillSchema(ds,System.Data.SchemaType.Source,"test");
da.Fill(ds,"test");
DataRow current;
current=ds.Tables["test"].Rows.Find(search.ToUpper().Trim());
if(current != null)
{
}
da=null;
ds=null;
current=null;
conn.Close();
thanks
chad
|
|
|
|
|
AFAIK you can only use the Find* method on PKs. You can however try using the DataView and using a RowFilter
|
|
|
|
|
I'm creating a custom program that's going to be used to run a "presentation station". The presentation station should enable the user to supply photos from any camera.
I need to replace the windows camera wizard with my own wizard. I'm going to provide some of the functionality of the original one, and a more elegant UI.
How would I approach this? Would Windows Image Acquistion Automation Layer do the job?
A few details. I need to be able to do the following...
- Most importantly - automatically start my wizard when camera is detected. (i would like the scanner to be ignored if possible)
- Transfer images to computer
- Delete image on camera
- Get thumbnails is optional - can be accomplished by getting full images and creating thumbnails manually
|
|
|
|
|
hi everybody,
i have some provlems ti find a good way to make difference between 2 datetime.
for example i want the difference between the DateTime.Now and 2004-05-03 12:56:32.
And i would like to have the result like 0year 4m ?h ?m ?s .
DO you have any idea plz.
thx in advance !
|
|
|
|
|
DateTime a;
DateTime b;
TimeSpan ts = a - b;
|
|
|
|
|
well i have already test this , but the results are strange :/
DateTime dt = new DateTime(2004,05,17,04,45,20);<br />
DateTime dt2 = DateTime.Now;<br />
TimeSpan ts = dt2-dt;<br />
DateTime result2 = new DateTime(ts.Ticks);<br />
Console.WriteLine(dt2.ToString());<br />
Console.WriteLine(dt.ToString());<br />
Console.WriteLine(result2.ToString());<br />
Console.WriteLine(result2.ToString("y'y' M'M' dd'd' H'h' mm'm' ss's'"));
Here are the results :
26/09/2004 00:46:50
17/05/2004 04:45:20
12/05/0001 20:01:30
1y 5M 12d 20h 01m 30s
isn't it strange ?
|
|
|
|
|
Apusnaias Wrote:
Here are the results :
26/09/2004 00:46:50
17/05/2004 04:45:20
12/05/0001 20:01:30
1y 5M 12d 20h 01m 30s
isn't it strange ?
I think you mean especially strange that you get 1 year. This happens from the Creation of the DateTime object result2. As the MinValue of DateTime is 0001/01/01 00:00:00, you get this date plus the difference between the to dates.
With the TimeSpan object ts you get the difference in seconds, minutes, hour and days; but not for months and years, as this is depending on the Month and year (a Month can have between 28 and 31 days).
For more Info I recommend the MSDN Documentation about TimeSpan and DateTime.
Greets
Roland
Wenn Du diesen Satz irgendwo liest, ignoriere ihn.
|
|
|
|
|
hi everybody,
im working on animation project, i need to know how to save a sequence of gif images in a single file in order to create an animated gif, i searched the msdn files but couldnt find anything useful. can anybody help me out??
huda
|
|
|
|
|
Hi all,
I am writing a function in C#, which is a method in a class to swap two integers which are the data members of the class. I think pointers must be used only in an unsafe context.
can anyone tell me how to define unsafe context in my problem...here is the function.
using System;
using System.Drawing;
using System.Drawing.Imaging;
namespace SpineAnalyzer
{
public class ConvMatrix
{ --- members initialisation----
public void Swap(int *x, int *y)
{
int temp;
temp=*x;
*x=*y;
*y=temp;
}
public void Flip_Hor()
{
Swap(&TopLeft11,&BottomLeft31);
Swap(&TopLeft12,&BottomLeft32);
Swap(&TopLeft13,&BottomLeft33);
Swap(&TopLeft21,&BottomLeft21);
Swap(&TopLeft22,&BottomLeft22);
Swap(&TopLeft23,&BottomLeft23);
Swap(&TopLeft31,&BottomLeft11);
Swap(&TopLeft32,&BottomLeft12);
Swap(&TopLeft33,&BottomLeft13);
Swap(&TopMid1,&BottomMid3);
Swap(&TopMid2,&BottomMid2);
Swap(&TopMid3,&BottomMid1);
Swap(&TopRight11,&BottomRight31);
Swap(&TopRight12,&BottomRight32);
Swap(&TopRight13,&BottomRight33);
Swap(&TopRight21,&BottomRight21);
Swap(&TopRight22,&BottomRight22);
Swap(&TopRight23,&BottomRight23);
Swap(&TopRight31,&BottomRight11);
Swap(&TopRight32,&BottomRight12);
Swap(&TopRight33,&BottomRight13);
}
public void Flip_Ver()
{
Swap(&TopLeft11,&TopRight13);
Swap(&TopLeft12,&TopRight12);
Swap(&TopLeft13,&TopRight11);
Swap(&TopLeft21,&TopRight23);
Swap(&TopLeft22,&TopRight22);
Swap(&TopLeft23,&TopRight21);
Swap(&TopLeft31,&TopRight33);
Swap(&TopLeft32,&TopRight32);
Swap(&TopLeft33,&TopRight31);
Swap(&MidLeft1,&MidRight3);
Swap(&MidLeft2,&MidRight2);
Swap(&MidLeft3,&MidRight1);
Swap(&BottomLeft11,&BottomRight13);
Swap(&BottomLeft12,&BottomRight12);
Swap(&BottomLeft13,&BottomRight11);
Swap(&BottomLeft21,&BottomRight23);
Swap(&BottomLeft22,&BottomRight22);
Swap(&BottomLeft23,&BottomRight21);
Swap(&BottomLeft31,&BottomRight33);
Swap(&BottomLeft32,&BottomRight32);
Swap(&BottomLeft33,&BottomRight31);
}
public void Flip_Hor_Ver()
{
Flip_hor();
Flip_ver();
}
}
here is the error i'm getting
:-Pointers may only be used in an unsafe context
can anybody help in how to implement pointer for my function and how to call from other methods of the same class.
thanks in advance,
Pavan.
Suman
|
|
|
|
|
|
Hi,
it helped tough and I am able to fix the function definition... but the only other repeated error was
----: You can only take the address of unfixed expression inside of a fixed statement initializer.. wht is a fixed statement initializer and unfixed expression... i did went through MSDN, but not able to understand their definition and the way they r defining...
here is how i defined my methods
unsafe static void Swap(int *x, int *y)
{
int temp;
temp=*x;
*x=*y;
*y=temp;
}
unsafe public void Flip_Hor()
{
Swap(&TopLeft11,&BottomLeft31);
Swap(&TopLeft12,&BottomLeft32);
Swap(&TopLeft13,&BottomLeft33);
Swap(&TopLeft21,&BottomLeft21);
Swap(&TopLeft22,&BottomLeft22);
Swap(&TopLeft23,&BottomLeft23);.....
.
.
.
}
Are my method definitons are wrong?
or should i have to add anything more...
anotehr error is...
Method System.Windows.Forms.Form.CenterToParent not found.
I have implemented a form to take a value as a parameter to my program.... but in its defintion it is giving the above error. The same form is workin well in another project, but givin the above eroor in another project..any idea why it is like tht...
can anyone help me....
thanks in advance,
Suman
|
|
|
|
|
with a little reference into the Professional C#... i have resolved my problems....
thanks
Suman
|
|
|
|
|
I have this byte[] variable with an UNICODE encoded string. The string is not null terminated, but I know its size. What is the fastest way to convert the byte[] to a string?
Regards,
João Paulo Figueira
Embedded MVP
|
|
|
|
|
byte[] bytes;
string s = System.Text.UnicodeEncoding.Unicode.GetString(bytes);
you can optionally specify the size.
|
|
|
|
|
I'm curious now, i've looked at serialization and other encoding / decoding methods, but is there any simple way to type cast a simple object like an image or struct, into a set of bytes and back?
Or does it have to be done using serialisation?
Chrs
Cata
|
|
|
|
|
Actually I believe the .NET serialization is probably the easiest and quickest way of getting the task done.
If you want to do it by yourself you have to take care of quite a mess. For example to get the image from a byte array
MemoryStream ms = new MemoryStream(byte[]);
Image i = Image.FromStream(ms);
You can go the other way by doing i.Save(stream, encoding.... etc.)
I might be missing some quick and dirty way of doing this through use of unmanaged memory reading but you have to be careful with that.
|
|
|
|
|
I thought as much, but i was just thinking, as everything is represented as a collection of bytes, why can't you just declare a collection of bytes as an object (obviously error handle it for invalid format), or declare an object as a collection of bytes.
Are there any physical restraints on this?
Cata
|
|
|
|
|
|
I've got a LOGFONT structure for a windows caption, and i'd like to pull the details from it relating to font family and size.
Font family I can get, that's not a problem, but there is no mention of the font size anywhere.
As the font size is related to the caption size only in terms of the captions minimum size, i know it's only tied in with the actualy font, but the height and width don't seem to have any bearing on the EM or Pixel size.
Is there some equation, or other route therof to obtain this information?
Cheers
Cata
[Edit: Height in the LOGFONT says it is EM-Height. The Hight in .NET font is line height. Am I right in assuming that the Logfont height would be used as .NET font size?]
|
|
|
|
|
hiii every body is there anyone who can help me in my problem
i have an application that is consist of a main screen with a main menu from that menu i open another forms, i found that the memory space my application reserve increase every time i open a form and close it
i mean that in the first time i open the program the memory space it take on the winows task manager 13,... k
after i open any form from the menu the size become 22,000 k closing the form and return to the main form the size of memory become 20,000 k but it doesn't return to its initial state
note : i found that when i minimize the application and maximize it again the memory return to its first state
---- my application contain too more graphics-----
can any body help me please
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
