|
Right now all culture values in database are 1. And yes, the Estimated Execution Plan is exactly the same for both @c = 1 and @c = 0.
|
|
|
|
|
Okay, first you could add an index with two columns: Culture, Date DESC:
CREATE INDEX X_Test ON News (Culture, Date DESC);
After that, see what happens for the execution plan (and the performance).
After doing that, you could experiment a change to the query (I suspect that the above modification will not be enough, but if it is, the skip the rest):
SELECT TOP(@Count)
id, title, description
FROM News a
WHERE Culture = @c
AND @Start <= (SELECT COUNT(*)
FROM News b
WHERE b.Date < a.Date
AND b.Culture = @c)
ORDER BY Date DESC
Again see execution plan and performance.
Also is the ID column defined as IDENTITY and are the records added to the table in date order. In other words what I'm after, if the identity is greater on one row is it always true that its a newer post based on date column?
If you could post the results for those two operations.
|
|
|
|
|
Dear Mika,
Adding the following index:
CREATE INDEX X_Test ON News (Culture, Date DESC);
didn't solve the problem. But after I disabled the index which only was on Date column, both queries ran very fast. (that is, disabling an index apparently solved the problem). The index containing the two columns (Culture, Date) was not being used as long as there was an index on Date column.
So now, this query runs very fast for both @c = 0 and @c = 1
DECLARE @Start INT, @Count INT
SET @Start = 1
SET @Count = 5
DECLARE @c TINYINT
SET @c = 1;
WITH paging AS (
SELECT id, title, [description], ROW_NUMBER() OVER (ORDER BY Date DESC) rownum
FROM News
WHERE Culture = @c
)
SELECT * FROM paging WHERE rownum BETWEEN @Start AND (@Start + @Count - 1)
But it turned out to be a temporary cause of happiness! If I start changing the value of @start parameter, things will start to change. When @c is set to 1, the query runs very fast for the following @start values:
1, 10, 100, 1000, 10,000
But when I set @start to 100,000, the query become a long-running one (It took 2:27 mins to execute).
After executing the query again (with @start set to 100,000) it executed very fast (probably due to previous execution). Now when I set @start to 200,000 again it goes to sleep...
When @c is set to 0, it will execute very fast for any value of @start variable.
Regarding your question about Date column: As I told you, I've inserted 1,500,000 rows randomly into News table. Therefor, even though the ID column is an incrementing Identity column, the Date is not necessary greater for greater ID columns. In the real-world running database though, the Date value is greater for greater ID columns for sure.
Here is the execution plan of my query with the new two-column index: look[^]
and here is the execution plan for your query: look[^]
** p.s. I also noted that the order of columns in Index is important in this case. If I move the Culture to become the second column in index, the index becomes of no use.
|
|
|
|
|
Maysam Mahfouzi wrote: after I disabled the index which only was on Date column, both queries ran very fast
Yeah, that's on of those annoying features for SQL Server optimizer. It isn't very good in index selection.
Maysam Mahfouzi wrote: But when I set @start to 100,000, the query become a long-running one
Yes, that was predictable since the further you go, the more rows have to be read before you're "in the right position".
And I suspect that this was the way both query versions behaved?
Maysam Mahfouzi wrote: In the real-world running database though, the Date value is greater for greater ID columns for sure.
Is that something we can rely on? If it is, it would be possible to change the query to be based on id (however in that case you should regenerate the test environment data to correspond actual data).
Another option is that can you change the parameters? Instead of defining start point as number of previous rows is ot ok to use some other mechanism (...thinking about the solution...)
|
|
|
|
|
Mika Wendelius wrote: And I suspect that this was the way both query versions behaved?
It only happened for @c = 1
Mika Wendelius wrote: Is that something we can rely on?
Probably, but I think it would be better to write a query independent of Date values.
Frankly, I think my query is not much complicated and everybody now and then my find himself dealing with such queries. It's really sad that SQL Server is not able to handle it.
Thanks for trying to help me Mika, please let me know if you come up with any solution.
|
|
|
|
|
What about the parameter question I asked? I was thinking about a solution where you would define a starting point as float. Initial starting point is 0 and you pass how many rows you want per page (for example 10). Next time you call this query, you would specify the starting point as the float found on the last row of the page you got and then again how many rows you want.
So what this means in action is that first you create a new column:
ALTER TABLE News
ADD StartPoint AS ((Culture * 100000000) + CONVERT(float, Date))
PERSISTED
Then you index it:
CREATE NONCLUSTERED INDEX X_StartPoint ON News (StartPoint)
Now the query would be like:
DECLARE @Start float, @Count INT
SET @Start = 0
SET @Count = 5
DECLARE @c TINYINT
SET @c = 1;
SELECT TOP(@Count)
id, title, description, StartPoint
FROM News a
WHERE Culture = @c
AND StartPoint > @Start
AND StartPoint < ((@c + 1) * 100000000)
ORDER BY Start
|
|
|
|
|
Thanks Mika for the solution,
But I can not make the column persisted because of the following error:
Computed column 'StartPoint' in table 'News' cannot be persisted because the column is non-deterministic.
|
|
|
|
|
Sorry, at least one typo. The date column must be in angle brackets. I made succesfully a test like this. Is it similar to your structure:
CREATE TABLE News (
[Date] datetime,
[Id] int,
[Culture] tinyint
)
--
ALTER TABLE News
ADD StartPoint AS ((Culture * 100000000) + CONVERT(float, [Date]))
PERSISTED
|
|
|
|
|
Mika Wendelius wrote: CREATE TABLE News (
[Date] datetime,
[Id] int,
[Culture] tinyint
)
--
ALTER TABLE News
ADD StartPoint AS ((Culture * 100000000) + CONVERT(float, [Date]))
PERSISTED
I can execute this query too, but when I want to alter the current News table, it tells me that the columns is non-deterministic. 
Apart from that, I didn't get the concept of multiplying Culture by 100000000. Why didn't you write something just like this?
ADD StartPoint AS CONVERT(float, [Date])
And yet another question, what't the difference between sorting on a float column rather than date column?
|
|
|
|
|
Maysam Mahfouzi wrote: when I want to alter the current News table, it tells me that the columns is non-deterministic
Could you post the script for the News table.
Maysam Mahfouzi wrote: I didn't get the concept of multiplying Culture by 100000000
The idea is to create a single column which orders the culture and date columns together. To combine those columns to a single column and to have unique values I converted the date to float so that I can add culture to it. However since Cultures are 1,2,3... I cannot add them to the date since it would change the "date portion" of the float so I decided to multiply the culture with a number big enough so that it won't get mixed with the date.
For example if I would add a new record to the new right now with culture 1 the result would be 100039839.592728. After that I can use these numbers as "pointers" to rows to define a specific starting point to the query. This eliminates the need to read previous records. So what I'm after is that if you have selected news page by page, the next query can always start from the exact point where the last record came from.
|
|
|
|
|
So I suppose that you are suggesting an alternative way to replace ROW_NUMBER() function, so that we do not need to calculate row number each time from scratch, am I right?
If we use:
ROW_NUMBER() OVER(ORDER BY news.[Date] DESC)
each time all rows should be sorted based on Date and then row number will be assigned to them. But with your approach, we do not need to sort Date column at all.
If I'm right, can we conclude that ROW_NUMBER() OVER(ORDER BY news.[Date] DESC) is not a good option for tables containing a millions of rows?
here is my table script:
CREATE TABLE [News](
[ID] [bigint] IDENTITY(1,1) NOT NULL,
[Url] [varchar](300) NULL,
[Title] [nvarchar](200) NULL,
[Description] [nvarchar](3000) NULL,
[Date] [datetime] NULL,
[Rank] [float] NULL,
[ViewCount] [int] NULL,
[Vote] [smallint] NULL,
[Culture] [tinyint] NULL,
CONSTRAINT [PK_NewsItem_1] PRIMARY KEY CLUSTERED
(
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF,
ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
|
|
|
|
|
Yes you interpretaion was correct. That's what I tried to explain (but with lots of useless word between  )
It seems that SQL Server 2005 won't create this column while 2008 will. Too bad.
However, I think we could do this with the datetime also
DECLARE @Start datetime, @Count INT
SET @Start = GETDATE()
SET @Count = 5
DECLARE @c TINYINT
SET @c = 1;
SELECT TOP(@Count)
id, title, description, Date
FROM News a
WHERE Culture = @c
AND Date < @Start
ORDER BY Date DESC
The idea is the same. Define a starting point to the current datetime, fetch page and when you want the next page, define the starting point to the last date in the previous page (from the last row).
The date column must be unique in this version so two different news must have at least 1 ms difference in date. You can try it by testing different values for the @Start variable.
|
|
|
|
|
But I guess there is a problem with this approach. That is, when we show pagination buttons at the bottom of page, how can user go to page 7 from page 1 without knowing the last date of page 6?
|
|
|
|
|
Okay, if it's possible to skip pages, then this won't work. I started to think some kind of pre-pagination, but I think that won't work either...
Hmm, are the news deleted often? Could it be acceptable that if a record is deleted, a time consuming operation is executed?
What I'm thinking is that if we would have a ordinal number on the rows (1,2,3,4...) and we know the maximum at every moment then the page 6 (with 10 news on page) would be from (maximum - (5 * 10)) to (maximum - (6 * 10)) + 1. Now if we create an unique index on the ordinal column we get the maximum very fast and the query will also be very fast. The downside is that if a record is deleted, the ordinals must be rearranged starting from the deleted position to the maximum. However this would be one simple operation (although it may take awhile).
Do you see problems in that solution?
|
|
|
|
|
Mika Wendelius wrote: Do you see problems in that solution?
I don't see any problem with it dude, it seems something to work
But the question is: Is this just MY problem with pagination, or everybody else is dealing with such problem for large number of rows. Have you ever had the same problem with paging?
You know my conclusion is that, maybe, pagination has never been meant to be used for large number of rows. If a user wants to browse news, it's very unlikely that he/she wants to go to page 3000, right? We can provide user with a filter on Date of news, and then he/she will be able to first filter them based on date, and then browse them by page.
|
|
|
|
|
Maysam Mahfouzi wrote: Is this just MY problem with pagination, or everybody else is dealing with such problem for large number of rows
I think I'm not the best person to answer that. The applications I mostly design act a little bit differently. Although they handle larege amount of rows I try to keep the result sets small and avoid paging at all. I think that there propably is several different solutions and the one I suggested may be one of those. Another approach could be that you page per date as you mentioned. One technical modification could be to use partitioning (but that requires Enterprise Edition) etc.
Maysam Mahfouzi wrote: You know my conclusion is that, maybe, pagination has never been meant to be used for large number of rows
That's my understanding too. It really doesn't make sense if you're on page 212347
Also one thing that we haven't spoken is caching. The page number change quite seldomly so you could cache the pages (or let's say first 100 pages) and use them from cache. In that case you just need to now when news are added in order to redresh the cache. That can be done using polling or better yet using SqlDependency. Still if cache is used and you go to the data beyond cache the search mechanism should be efficient.
So if you try the last suggestion and let's see what it does. Also try utilizing cache. It greatly helps you to maintain overall performance of the system.
|
|
|
|
|
I'm sorry to bother you with this long conversation but I'd like to continue it till I feel like I have no more questions
I'm thinking of a problem with last approach. That's right that it does not make sense to be on page 243546, but, think of a weblog, I can see paging for blog posts, and I want to go to last page! So, there have to be some way for me to get to last page (to see the first blog post), which may be on page 23453!
The problem with your last solution is that it will not work if we want to give paging to a result set from more than one table! right?
Mika Wendelius wrote: One technical modification could be to use partitioning (but that requires Enterprise Edition) etc.
How can partitioning help? Can you show me a starting point?
Think of a site like friendfeed, in this site I can see recent activities of a user. These activities have been probably collected from different tables in database. In this scenario, what happens if I want to see the very first activities of user? (I have to go to last page of activities)
|
|
|
|
|
Maysam Mahfouzi wrote: I'm sorry to bother you with this long conversation
You're not bothering me at all
Maysam Mahfouzi wrote: The problem with your last solution is that it will not work if we want to give paging to a result set from more than one table
That's correct since the numbers are precalculated per table.
Maysam Mahfouzi wrote: How can partitioning help
Since partitioning divides the rows into smaller sets, it improves performance and makes parallel querying easier for the dmbs. To get a quick look at partitioning, see: Partitioned Table and Index Concepts[^].
Maysam Mahfouzi wrote: These activities have been probably collected from different tables in database
This is the same problem as multiple tables in a query. I don't have any good idea immediately how to do it using SQL but again a technical tool could be using indexed views[^] (again an Enterprise Edition feature). It could be something like that you do the join for all rows and include row numbering into the result set. After that the view is indexed (this partly solves all multi table queries and ordering).
|
|
|
|
|
Dear Mika
You have not been on codeproject for a long time. Hope you are fine.
I have asked a question here[^]. Could you please take a look at it?
|
|
|
|
|
Hi
To ALL,
getting a problem when i was joined two tables and specified distinction
but the rows are repeating could anyone give me the suggestion
Thanks & Regards,
Nath.
dt_messageDate str_messge str_constituencyName
2009-01-20 00:00:00.000 Second Test Ichapuram
2009-01-20 00:00:00.000 Second Test Ichchapuram
2009-01-20 00:00:00.000 The last script Ichapuram
2009-01-20 00:00:00.000 The last script Ichchapuram
2009-01-21 00:00:00.000 Test1 Ichapuram
2009-01-21 00:00:00.000 Test1 Ichchapuram
2009-01-21 00:00:00.000 Test2 Ichapuram
2009-01-21 00:00:00.000 Test2 Ichchapuram
2009-01-23 00:00:00.000 asdf sdaaaas Ichapuram
2009-01-23 00:00:00.000 asdf sdaaaas Ichchapuram
2009-01-25 00:00:00.000 Second test Tekkali
2009-01-25 00:00:00.000 test Tekkali
2009-01-26 00:00:00.000 Godavari Anaparthy
|
|
|
|
|
Based on the data on your post the rows are not repeating since always at least one column is having a different value. Distnct removes only rows where every column has the same value.
Could you post a sample of the original data and info, what kind of result you're trying to get.
|
|
|
|
|
Hi,
I'm trying to use the bloody database wizard in vs 2008 and my Oracle database setup doesnt connect using the SID ie, I would normally get a valid connection doing username/password without postfixing it with @MySID
Now, I had some tnsnames file at:
MyOracleHomeDirectory\NETWORK\ADMIN\tnsnames.ora
which contains:
MySID =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME=MySID)
(SID=MySID)
(GLOBAL_NAME=MySID)
)
)
The point is, when using the database wizard in vs, you need to fill something in the SID box to enable the OK button!!
Please help guys  
All generalizations are wrong, including this one!
(\ /)
(O.o)
(><)
|
|
|
|
|
What database wizard do you mean? The one in Server explorer when adding a connection?
|
|
|
|
|
|
Muammar© wrote: I'm fine now
Good to hear that
And thanks for your kind words 
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
