|
You have to follow these instructions precisely:
1) Get a 35-foot CAT-5e cable rated for outside use, and make 7 coils between 7 and 8 inches in diameter, twisting the wire three times before it completes a coil. Lay the coiled wire on the desk and place something heavy on it to keep the coils from uncoiling.
2) Get four standard 7-inch metal butter knives, and tape them together so that when laid flat on the desk, the handles alternate between pointing up and down. Some people claim that if the handle is down on the left side, you get a better signal, but nobody's been able to prove it to my satisfaction.
3) Use 2-inch wide aluminum tape to connect the knifes together at both ends (be careful not to let the tape at one end touch the tape at the other end.
4) Solder a six-inch piece of 16-gauge wire on the handles of both the outermost knives.
5) Wrap the knife assembly in electrical tape so that the only thing exposed is the two pieces of wire.
6) Take the knife assembly and carefully tape the wire as tightly as possible to the coiled cat-5 cable. The tape will also server to keep the cat-5 coiled up.
7) Take one end of the cat5 and plug it into your switch. Plug the other end into your computer.
8) Your your internet connection. If you get a net connection that you don't want, unplug the cat5 from your computer and plug it into another available port on your switch. (that's why they call a switch a "switch").
If you're still having problems, google is your friend.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
sounds like how mcgyver would create a coil gun
|
|
|
|
|
You forgot to mention the tinfoil hat requirement during periods of heavy sunspot activity. And here I thought you were an expert...
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
Hitachi Deskstar 7K1000 1000GB SATA II (HDS721010KLA330)
for 316,32 Euro! That’s insane!
Cheers
|
|
|
|
|
So what? Next month it'll be even less...
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
I need to connect my coputers to the switch, and am confused about the cable end structure:
Shall i use both end straigh cable, or both end crossover cable, or one end cross(switch) and the other straight(computer).
Please tell and emphasise.
Best Regards.
Scorpion.
|
|
|
|
|
strait
crossover cables are only used to connect two PCs directly to each other.
--
CleaKO The sad part about this instance is that none of the users ever said anything [about the problem].
Pete O`Hanlon Doesn't that just tell you everything you need to know about users?
|
|
|
|
|
Straight. Just a plain cable that matches your network (e.g. CAT-5e).
And there is only ONE type of crossover cable. crossing over twice would lead you back to a normal cable, just with more interference.
In addition to the other answer:
You might also use a crossover cable to connect two switches if neither of them has an uplink port.
Cheers,
Sebastian
--
Ceterum censeo, borlandem esse delendam.
|
|
|
|
|
Thanks a lot guys, i really appriciate.
Scorpion. "Patience is virtue"
|
|
|
|
|
Straight cable can be problematic because you only have so much room behind your computer. This means the cable can only be so long. I would get curvy cable.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
No, straight cables are the way to go. The bits cannot take the high-speed curving and get all dizzy and confused.
... haha 
Cheers,
Sebastian
--
Ceterum censeo, borlandem esse delendam.
|
|
|
|
|
With the correct bit throttling diode, that's not a problem. The bits with then recognize and slow down for turns so they don't jump from wire-to-wire (this is the primary cause of bandwidth collisions). 
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Hi,
I want to map a USB device that is accessible over a serial port to another port because the asigned port is not available in the configuration of the application (yes, blame the application developer!).
All the lower numbers are marked "(used)", but in the Device Manager I can't see what device/component uses this port number. I have enabled 'Show hidden devices' but it is still not there.
How can I see what device/component is using the port? I need just some information (driver name, component name ...) to maybe remember what I installed that could create this problem.
Thanks for your help in advance
Roland
|
|
|
|
|
I'd try using a product by Lavalys called Everest. It seems to tell you a lot more than you might be able to find on your own. I always have a copy handy (engineers license).
My name is Maximus Decimus Meridius, Commander of the Armies of the North, General of the Felix Legions, loyal servant to the true emperor, Marcus Aurelius. Father to a murdered process, husband to a murdered thread. And I will have my affinity, in this life or the next. - Gladiator. (Okay, not quite Gladiator but close.)
I work to live. I do not live to work. My clients do not seem capable of grasping this fact.
Ancient of days! august Athena! where, Where are thy men of might? - Lord Byron
|
|
|
|
|
Hi all,
I want to ask if anyone knows how to know a null modem cable according to the resistance or voltage of its pins?!!
Regards,
|
|
|
|
|
A Null-Modem-Cable is a normal serial cable (usually RS-232 to RS-232) with a certain pin-to-pin mapping.
If you need one, and have a serial cable you can easily access, you could make it yourself.
I have some trouble understanding what you are trying to achieve. Could you explain what you are trying to do?
Cheers,
Sebastian
--
Ceterum censeo, borlandem esse delendam.
|
|
|
|
|
Hi Sebastian,
Thanks for your reply. I mean if I have a cable, how to check if it is a null modem cable or not because the problem is I have asked a saler in a computer shop to give me a null modem cable and he did gave me a cable but when I tried to communicate two DCE devices it didn't work!! So is there a way to check the cable according to the resistance/voltage between pins from both ends?
Regards,
|
|
|
|
|
the pins are connected differently. Google up the pinout/wiring diagrams and use a multimeter to check connectivity.
--
CleaKO The sad part about this instance is that none of the users ever said anything [about the problem].
Pete O`Hanlon Doesn't that just tell you everything you need to know about users?
|
|
|
|
|
Thankx Dan for your replay.
Could you be more specific. I mean what am I going to measure voltage? and what values I should expect?
Regards,
|
|
|
|
|
You're not measuring voltage. You're measuring resistance, or in your case, you're looking for the lack of it between two pins.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
Respected Friends
I am using window xp 2006. Its time is changing after 2 to 3 days so please tell me what is the problem
Imediate Response will be highly appriciated
With Best Regards
You are the best if you have done something constructive for world not destructive
|
|
|
|
|
Mine was doing the same thing, but after I installed AlfaClock it stopped.
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
If problem persist then change your MotherBoard Cell
|
|
|
|
|
I am new in canbus, I have this vauxhall propriatery interface , and i have know idea where to start from.
any one who could give me some userfull tips based on their experience, that how can I interface to a canbus , front end is to be designed in any .net langhuage, preferable C# or vb.net
any help would be much appreciated , links to books, docs, practical examnples , code etc,,,,
please
thanks
|
|
|
|
|
hi,
to access my wireless camera i m doing ip passthrough for my wireless camera in my router , after doing that i m not able to ing my ip add ( WAN ) from outside my network , when i disable ip passthrough again i m ableto ping my wan ip ... i m using westell 327 router.. . i m doing something wrong . & what it has to do with my WAN side ip add.
plz suggest me....
rituparn....
RST
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
