|
PCIe, AGP is a dead interface, new cards are now PCIe only. If you're building a lowend system that you're sure will never be upgraded it doesn't matter much, but for anything where gfx performance does matter if you go with agp now, you'll need a mobo upgrade if you need to upgrade your gfx card as well. There're a handful of boards that support both interfaces but they all did it by kluging an emulation of one of them, with inherently pitiful performance as a result.
|
|
|
|
|
If you plan to use old mobo, then AGP, else SLI, if you are hardcore gamer or graphics desginer or an enthusiast. Check Toms Hardware and Anand Tech for comparisons.
Farhan Noor Qureshi
if (this == this) thow this;
|
|
|
|
|
Hello all!
As I'm looking for a new hobby to spend the little time I have, I came across some nifty embedded systems at some mechatronic labs here at school. Being educated as a technical embedded systems programmer, I thought that it would be nice to build some hardware myself.
After some thought, I chose a robot as my first undertaking to get into this. Right after I decided this, I found my first problem: where am I going to get all the hardware? Since there are is a lot of crap out there, I must carefully choose my tools. Some of the things I need are:
<list> Microcontroller with C++ compiler
Servos
Pneumatic or Hydraulic cilinders
etc..
So my question to my fellow geeks out there: do you know some good stores for me where I can get all of this stuff?
Thanks a bunch!
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Mouser electronics or digikey will have the servos. As for microcontroller, depends on how much you want to spend. The PIC's and Motorola HCxx will have the cheapest test/eval boards for development and open source or inexpensive compilers. If your looking for more brute force, you can always get student discounts. I.e. ARM risc processor compilers are around $500 for student discount.
-good luck
|
|
|
|
|
Hello,
Thanks for your answer. I'll look more into this micro controller business and see where I can get a decent one that fits into my budget. I still have to see what my budget will be... 
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
If u want microcontroller then
u get PIC or a 8051 series .
that are the most cheap and reliable
But later on u can get the damest MC
if u have good budget.
But i prefer that u get some Kit and then
start ur work ,that will be fine and worth
the expense
Vikas Amin
Embin Technology
Bombay
vikas.amin@embin.com
|
|
|
|
|
Hello,
Thanks for your information. The 8051 series sounds nice and I have some experiance with them from college. I failed to find a C++ compiler for the board.. 
I'll probably have to get some decent budget for this undertaking of mine and I assume that it is an almost once-in-a-lifetime purchase, so I better do it good.
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Look at www.botmag.com
You should be able to find a lot of suppliers in there.
|
|
|
|
|
Thanks a bunch!
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Try acroname.com or lynxmotion.com
They're not the cheapest out there, but very reputable and have most stuff that you're lookin for. We've purchased alot of our robotics components from them. Of course, there are alot more resources, but it just depends on what exactly you're looking for and where you live.
|
|
|
|
|
Hello,
Thanks for your answer. I live in Holland and I'm now making an inventory of what I need and I have to get a budget.. 
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Hallo.
Help me please.
I'd like to write a toolkit that would allow to work with fingerprint device. Such functions as getting the finger image from the device, matching with other, save in database etc.
I have a device and driver for it.
Maybe you can give some tips what to do for achieving this.
I've disassembled the driver's "*.dll"s and found functions that might be necessary, but I don’t know how to work with them...
|
|
|
|
|
|
What all would you troubleshoot if your mouse (Logitech MX500 LED mouse) started locking up sporadically? No mouse motion, no button response. LED still shining.
I've found that unplugging it and replugging it (it is USB) will temporarily fix the problem. It may fix it for 5 minutes to 4 hours.
I've trimmed all unnecessary tasks in Task Manager, looked into 'Run' in Regedit and cleaned that up a bit, but nothing looked wrong, and cleaned the dust-bunnies out from in front of the LED. The problem even recurred when I had the mouse plugged into another USB port after doing all that.
What else, or does it sound like the mouse is ready to die?
Thanks,
David
(running Win2000 Pro on AMD box)
Anonymous Poster: "Come on, punk! Rate me down!"
|
|
|
|
|
do you have a 2nd pc to test the mouse on? That'd help localise the problem. You could try using a differnt mouse as well.
|
|
|
|
|
I don't have either, unfortunately.
Thanks for replying, though.
David
|
|
|
|
|
I have a simple qestion that when we make a function
inline then the code should be embeddede in the main
function and we should not have any call done to the
function .
But actully in VC++ this dont happen pls try the
example , and let me know that if am missing to set
any compiler flag .
In VC++ __forceinline is used to force inline function
by passing the cost/benefit analysis .I have tried that
also but it dont work .
To test the code just go to the disassembly and if u
find any assembly instruction as "call" then the inline
mechanism is not implement by ur vc compiler .
Thank you
Vikas Amin
Embin Technology
Bombay
vikas.amin@embin.com
|
|
|
|
|
what a C++ question do in a hardware forum Mr Amin ???
did you lost yourself into this deep deep dark website !? 
moreover, ,if i well remember,, this is a repost... maybe that's why you asked it here (to hope me not to see it  but you missed it  )
TOXCCT >>> GEII power
[toxcct][VisualCalc]
-- modified at 6:15 Wednesday 30th November, 2005
|
|
|
|
|
Hello,
The inline keyword is a hint to the compiler, not an absolute. The compiler still chooses best whats good for you or not..
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Vikas [[]]:
There are several reasons for that:
1) VC++ does not inline functions implemented in a diferent module from its declaration (at least for classes, the rest i don´t know). See this http://www.codecomments.com/archive292-2004-11-329446.html
2) Functions containing while cycles will not expand inline
3) Functions calling inline functions will not expand inline
I think that´s all.
Peace [[]]
hint_54
|
|
|
|
|
my pc gets restarted everytime i do a normal "switch on".. can u tell me what'd have gone wrong?
"But your mind is very complex, very tricky. It makes simple things complicated. -- that's its work. And for centuries it has been trained for only one thing: to make things so complicated that your life becomes impossible."- Osho
<marquee scrollamount="1" scrolldelay="1" direction="up" height="10" step="1">
--[V]--
|
|
|
|
|
The are several thing who can reboot your pc, but I think it's probably your power supply, check if your connection with your motherboard are ok.
|
|
|
|
|
Hi,
I have developed a WinXP based application in .NET C#. I want to make sure that it only runs on specified set of hardware. It first checks the hardware IDs of motherboard, RAM, and processor. This application compares those values to what it is supposed to run, and then decide if it is a valid set of specs.
I can get these IDs from registry but registry could be fooled. What I want is to directly access these hardwares and get the IDs.
Could anyone please help me out in this regard? I don't know if it is possible in .NET or I need to write an assembly code for it. Is there some api or already available programme to do so?
Thanks
Bilal Farooq
|
|
|
|
|
Hi
This is not a programming problem but i dont know where else to turn i need to know what kind of hardware i need to go on the internet with my PSP from home using a telephone line or do i need a satilite connection.
Thanks
H
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
