|
Because you're trying to assign a pointer-to-a-pointer to a pointer:
const WCHAR *new_directory_name = &DEFAULT_DlRECTORY
should be
const WCHAR *new_directory_name = DEFAULT_DlRECTORY
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
And that is because DEFAULT_DlRECTORY is an array and passing it as an argument means the address of the first character is passed. Ok, I must confess to being ate up with the dumb ass there.
Thank you for taking the time for a gentle kick in the butt.
Thank you for your time
If you work with telemetry, please check this bulletin board: www.irigbb.com
|
|
|
|
|
I had created an ATL Dialog based application in visual studio 2012,On Scrolling the mouse wheel I want my dialog to be scrolled.
What should i write inside:
LRESULT CUIWindowPage::OnMouseWheel(UINT uMsg, WPARAM wParam, LPARAM lParam, BOOL& bHandled)
{
??
}
|
|
|
|
|
|
I am using Microsoft speech sdk v 11 (https://msdn.microsoft.com/en-us/library/jj127898.aspx[^]). the below call fails, when I check GetLastError, observed that it fails to message "Class not registered". visual studio 2008, windows 7
hr = cpVoice.CoCreateInstance(CLSID_SpVoice);
Please advise
modified 14-Dec-15 7:05am.
|
|
|
|
|
When using Windows 7 64-bit, check if you have installed the version of the Microsoft Speech Platform - Runtime that matches your project settings (32 or 64 bit), or just change your project to match the installed version.
|
|
|
|
|
Thanks for response. project is 32 bit and I installed x86. I think that should be ok. what could be other reasons please advise. thanks in advance.
|
|
|
|
|
Did you have called CoInitialize[Ex] before?
To check if it is registered you can look into the registry at HKCR\CLSID\value_of_CLSID_SpVoice. If it is not present, it may help to re-install the runtime.
|
|
|
|
|
Windows 7, Visual Studio 2010, C++
An application I wrote that has been running for over a year has just started getting an unhandled exception. It is _com_error and the exact return value if E_FAIL, an unspecified error. That is unhelpful. The crash window specifies an address where the crash occurred.
Question:
How does one take that address and find the place in the code where the program was executing when the exception was first thrown?
Thank you for your time
If you work with telemetry, please check this bulletin board: www.irigbb.com
|
|
|
|
|
|
|
Windows 7, Visual Studio 2010, C++
How can an application determine the maximum size for a single chunk of data to be sent from a server application to a client application on another computer?
This is on a private network, not not accessible outside of the control room. There is a switch between the two computers but that is about it.
I presume this can be done a run time. My application sends large amounts of telemetry data to a client for display. The goal is to reduce buffering as much as possible. The app uses overlapped I/O with completion events.
Thank you for your time
If you work with telemetry, please check this bulletin board: www.irigbb.com
|
|
|
|
|
|
I am getting back to my application that ingests telemetry data and sends it to a display device. There will be a lot of data and a lot of packets. The data to the display device will be about 4.5 megabytes per second per stream. I think I need the program to have the ability determine the MSS and MTU so it can build the buffers and get them out in the most efficient manner possible. I would prefer for the app to get this data on the fly rather than hard code numbers into the app.
I have seen all those links via my search but nothing tells me how to get these values via code, c++ code specifically.
Thank you for your time
If you work with telemetry, please check this bulletin board: www.irigbb.com
|
|
|
|
|
|
MTU size dictates this...
To figure out the system MTU size at run-time, in Linux use getsockopt() with IP_MTU.
ip(7): IPv4 protocol implementation - Linux man page[^]
Windows has a similar call but not sure if the MTU option is readily available.
Keep in mind that every device that the packet touches will impose it's own MTU size restrictions on it and you can't necessarily control all of them (depends on setup of course). In another words, even if your device doesn't fracture a packet, another one down the line may choose to do so. There are ways to do "mtu" discovery to find the max size transferrable. Just something to be aware of.
|
|
|
|
|
Hi,
I am just to trying to customize folder selection dialog by deriving a class from CFolderPickerDialog in VS2012. But VS2012 Wizard does not provide the option to add class with base class from CFolderPickerDialog. The base class list in Add Class wizard does not contain this class CFolderPickerDialog. Any idea why this base class is missing?
Also i tried manually added a class with CFolderPickerDialog as base class with correct message map related maros, function etc. But still i cannot get WM_TIME event handler, OnInitDialog is getting called in derived class. If anybody having any ides pls let me know.
Thanks,
Prasanth
|
|
|
|
|
This would be better placed in the C / C++ / MFC forum[^].
There is no class wizard support because the CFolderPickerDialog is based on Windows common dialogs which are handled a little bit different. So you must derive your class manually.
To get help with your problem you should post the relevant source code parts.
|
|
|
|
|
Hi. I wrote a code that should have graphical menu choices. But I am getting error I believe it is syntax error where it does the menu choices. Can you please help me fix it for me? It has a lot of errors I believe they are syntax. I am thinking if I fix few errors all of them will be perfect. Please post your code. Thank you so much. Here is the part of the code that I have problem.
CWindow :
{
public:
CContainedWindow m_Parent;
CWindow() :
m_Parent(this, 1){}
protected:
typedef CWindowImpl<T, TBase, TWinTraits> baseClass;
BEGIN_MSG_MAP(CWindow)
other msgs
ALT_MSG_MAP(1)
MESSAGE_HANDLER(WM_DRAWITEM, OnDrawItem)
END_MSG_MAP()
{
}
};
CWindow
{
public:
DECLARE_WND_SUPERCLASS(_T("WTL_CButtonMenu"), GetWndClassName())
CButtonMenu& operator=(HWND hWnd)
{
if (m_hWnd)
DestroyWindow();
if (::IsWindow(hWnd))
SubclassWindow(hWnd);
return *this;
}
CWindow btnMenu;
btnMenu = GetDlgItem(IDC_BTN_ABOUT);
btnMenu.AddMenuItem(IDC_MNU_ONE, "Windows");
btnMenu.AddMenuItem(IDC_MNU_TWO, "Template");
btnMenu.AddMenuItem(IDC_MNU_THREE, "", MF_SEPARATOR);
btnMenu.AddMenuItem(IDC_MNU_FOUR, "Library");
};
|
|
|
|
|
What is the error? Are you sure you can add a menu item to a button?
|
|
|
|
|
Hi eveeryone,
Can someone please look at my code and teach me where i am making mistake.
void Laptop::show()
{ Computer::show();
cout<<"weight is="<<weight<<endl;
cout<<"height is ="<<height<<endl;
cout<<"length is ="<<length<<endl;
cout<<"width is ="<<width<<endl;
}
//In this function Laptop::show is a child class fucntion which is calling Computer::show(); a base class function.but compiler gives error to use .or -> so function Computer::show(); is not called.
Orignal code is given below:
#include<iostream.h>
#include<conio.h>
class Computer
{
protected:
int wordSize;
int memorySize;
int storageSize;
int speed;
public:
Computer(){}
Computer(int,int,int,int);
void show();
};
class Laptop
{
private:
int width;
int height;
int length;
int weight;
public:
Laptop(){}
Laptop(int,int,int,int,int,int,int,int);
void show();
};
Computer::Computer(int wdSize, int memSize, int storSize ,int spee)
{
wordSize=wdSize;
memorySize=memSize;
storageSize=storSize;
speed=spee;
}
void Computer::show()
{
cout<<"Word Size :"<<wordSize<<endl;
cout<<"Memory Size: "<<memorySize<<endl;
cout<<"Storage Size"<<storageSize<<endl;
cout<<"Speed :"<<speed;
}
Laptop::Laptop(int wdSize, int memSize,int storSize, int spee,int wid, int hei , int len , int wait ):Computer(wdSize,memSize,storSize,spee);
{
width=wid;
length=len;
height=hei;
weight=wait;
}
void Laptop::show()
{ Computer::show();
cout<<"weight is="<<weight<<endl;
cout<<"height is ="<<height<<endl;
cout<<"length is ="<<length<<endl;
cout<<"width is ="<<width<<endl;
}
void main()
{
clrscr();
Computer comp(4,512,20,2);
Laptop lap(8,1024,50,2,15,19,14,2);
cout<<"Computer Specifications are"<<endl;
comp.show();
cout<<":Laptop specifications are"<<endl;
lap.show();
getch();
}
|
|
|
|
|
Your Laptop class does not inherit Computer, so you cannot call it in that way. Your definition should be:
class Laptop : Computer
{
|
|
|
|
|
Hi all,
I'm trying to use ATL(no mfc support) to develop a activex component used in IE, and I want to design UI like common windows including menu, view window and status bar, but all article I searched from web always use dialog style, no related article for my problem.
Also, I have the code generated by wizard, Within my com component, I have the code block below:
CContainedWindow m_ctlStatic;
MESSAGE_HANDLER(WM_CREATE, OnCreate)
MESSAGE_HANDLER(WM_SETFOCUS, OnSetFocus)
CHAIN_MSG_MAP(CComControl<CUniDocCtrl>)
ALT_MSG_MAP(1)
END_MSG_MAP()
also, the OnCreate code is below:
LRESULT OnCreate(UINT , WPARAM , LPARAM , BOOL& )
{
RECT rc;
GetWindowRect(&rc);
rc.right -= rc.left;
rc.bottom -= rc.top;
rc.top = rc.left = 0;
m_ctlStatic.Create(m_hWnd, rc);
return 0;
}
My idea is to replace the
m_ctlStatic.Create(m_hWnd, rc); with my own windows create function and add menu, code is below:
m_ctlStatic.Create(m_hWnd, rc, _T("hello"), WS_CHILD | WS_VISIBLE | ES_MULTILINE | ES_AUTOVSCROLL);
HMENU hmenu;
hmenu = LoadMenu(g_hModule,MAKEINTRESOURCE(IDR_MENU1));
m_ctlStatic.SetMenu(hmenu);
It doesn't work at all, and also it jump to base method which display the "ALT 10.0" text.
how to solve this problem, thanks in advance.
|
|
|
|
|
Hello
I have an application made with VC++ that can show a lot of dialogs. Those dialogs have been defined in an RC file and contains ActiveX controls made with Visual Basic 6.
My promen is the following one:
I have compiled the application in 64 bits, and when I launch the application and it is going to show a dialog, it fails. I think this is due to there is not 64 bits runtime for VB6.
What I want it is to generate an equivalent RC file to the RC file I have but replacing the controls made with VB6 with others made with VC++.
The obvious way is to edit the dialogs with Visual Studio C++ resource editor, and replace each control with its equivalent control. The problem is that I have a lot of dialogs (about 1000).
Is there a easy way to do this?
A possible way could be to generate an application that load the dialogs, and replace the controls during the execution, and then generate and RC file with the resultant dialogs. Something similar to what makes Visual Studio C++ resource editor.
I have tried to implement this solution, but I don't find the way to generate an RC file from a dialog loaded during the application execution.
Any help will be appreciated,
Best regards.
|
|
|
|
|
I assume that the original 32-bit code used VB6-specific control elements, that the source code (text) for the RC file is unavailable, and that you are familiar with the .RC (source code for resources) file format.
To my knowledge, there is no fully automated method of performing the conversion. What you must do is the following:
- Extract the resources from the .EXE file using a resource file editor.
I have used ResEdit (freeware) for examining resources in EXE files. IIRC, it can also extract resources from an EXE/DLL. - Convert any VB6-specific elements to generic Windows versions
Each dialog etc. specifies its "class" type, which affects how it is displayed. This includes the DLL that must be loaded in order to display it. Convert any VB6-specific names to the generic equivalent (e.g. "VB6button" should be renamed "button", "VB6dialog" should be renamed "dialog", etc.) - EDIT: Some ActiveX controls may have no generic control that can replace them. In this case, you must decide whether to use a class library that supplies the missing functionality, or eliminate them from the file.
- Recompile the RC file using the Visual Studio resource editor.
You should get an application that has standard dialog boxes. It will presumably require lots of tweaking before the layout etc. looks OK, but it is a good starting point.
Good luck!
If you have an important point to make, don't try to be subtle or clever. Use a pile driver. Hit the point once. Then come back and hit it again. Then hit it a third time - a tremendous whack.
--Winston Churchill
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
