|
It's also the best phone to use outdoors since the screen brightness goes all the way up to 1000 nits. (It's not RGB, it's RGBW)
|
|
|
|
|
Not as far as I know...
I own a set of KEF EGG loudspeakers which I have connected to the PC (lenovo laptop, nothing special) through USB.
The Loudspeaker has an integrated DAC and connects digitally to the PC (DAC acts as a sound card), file is interpreted into the DAC and goes out to the speaker directly giving you the best sound possible without things in the middle.
Those are the cheapest loudspeakers from KEF (https://international.kef.com/products/egg[^]) which I bought to put them in my desktop.
I really can't be more happy with them.
So the DAC option (if you already own a good set of speakers) is the way to go.
As a plus, my loudspeakers come with a remote control... given they are connected through USB you can pause, mute, jump songs... that would be a good thing in your new DAC.
PS: Using HDMI the sound card used is the one in your PC... which won't be great...
|
|
|
|
|
Joan M wrote: PS: Using HDMI the sound card used is the one in your PC... which won't be great...
Ain't that the truth! See my last post above. My objective is to get a high quality signal into my pre-amp, from where on the sound is very high quality. The streaming source is currently the weakest link.
Incidentally, my speakers are at the other end of the scale - six feet tall and 30 kg each!
|
|
|
|
|
Yes, that's why I'm recommending you to use an external DAC which will make your music sound sweet in your super loudspeakers.
HDMI (connected directly yo your PC) would output a crappy sound compared with any proper DAC out there.
|
|
|
|
|
.. or, of course, go for Jörgen's suggestion, and use a phone with a top DAC in it. I certainly agree that the DAC in the laptop is not up to scratch.
|
|
|
|
|
If you use the phone, you will depend on the capability of the phone OS to output the audio through USB, the 3.5 audio jack will never be enough for what you want.
And in case you decide to go Bluetooth or wifi way, you will have to get used to delays, unless you have APTX... but again that is not top notch quality.
Disclaimer: I'm not by any means an audiophile... this is what the guy at the HI-FI shop explained me while buying my loudspeakers.
|
|
|
|
|
After installing those KEF loudspeakers (connected to the USB port in my laptop) I started noticing the difference of FLAC audio files compared with the default Spotify quality.
Now it's not the best moment to walk into one HI-FI shop, but I'm pretty sure once this passes away, you'll be able to check how different DAC sound in the same loudspeakers.
|
|
|
|
|
Same as my problem - the difference between the 192k and full 320k FLAC on Idagio is just not distinct enough, and at times just not audible at all, hence my dilemma.
|
|
|
|
|
Of course, because the source of the audio is terrible...
Whatever you decide you need something that process your files correctly and output the right signal to your loudspeakers.
Let's be clear, my desktop loudspeakers are the best I found to be used as laptop loudspeakers around 400€, which is already expensive to hear the incoming mail sound... but super cheap for HI-FI loudspeakers... but even that when I put music, it's wonderful. And you can listen at the same song in spotify free vs. FLAC and the difference is incredible.
|
|
|
|
|
Chris C-B wrote: six feet tall and 30 kg each
That's not very heavy for so large speakers.
My B&W XT8 are just 1.2m and weighs in at 25kg
|
|
|
|
|
Agreed, but the top 48" are ribbons - they are Carver speakers, old but still in perfect condition. Checking the manual they are actually a shade over 36kg. One of the things I particularly like about them is that with a low crossover frequency, the bass and treble power requirements are very well balanced, making them ideal for vertical bi-amping (one stereo amp for each channel, left and right)
|
|
|
|
|
I have listened to a couple of Apogee fullrange with Krell monoblocks once. If they are anything near that I'm envying you a lot.
|
|
|
|
|
can you run digital optical to your stereo input from your TVs output? That's the way I'd go. SPDIF.
That way you keep it in digital, lossless form until it reaches the high quality DAC in your stereo system
Real programmers use butterflies
|
|
|
|
|
The manual for the laptop says the 3.5mm headphone socket is "S/PDIF enabled" but I have no idea what that means, as it works just like an ordinary headphone socket, albeit loaded at the bass end. Any ideas?
I hardly ever turn the TV on, so I would rather not factor that into the equation.
|
|
|
|
|
It's a (usually fiber optic) based audio connection system. It means that jack can produce pure digital output for use with S/PDIF capable devices. Your stereo's amplifier should have a digital S/PDIF jack (it's almost a rectangle) that can take a fiber based cable. You'll need some sort of converter if you go that route but i strongly recommend that you do not.
I recommend you continue to use your laptop's HDMI to your TV (if i understand your setup) but you should consider getting an S/PDIF cable going from your TV to your amp assuming your TV supports it (many do)
Real programmers use butterflies
|
|
|
|
|
S/PDIF, Sony/Philips digital interface, works equally well using a fibre or copper.
|
|
|
|
|
I added a Sonos Port to stream to my older, but fairly nice, stereo. I enjoy the sound, but I’m not an audiophile.
You can stream Idagio through it,plus a lot of other stuff.
"Time flies like an arrow. Fruit flies like a banana."
|
|
|
|
|
Thanks - another option to consider. I presume there is a Sonos device that can interface with the laptop?
|
|
|
|
|
Also can use hard wired network if your wifi is slow.
"Time flies like an arrow. Fruit flies like a banana."
|
|
|
|
|
Chris C-B wrote: I am not sure of the USB2 capabilities - is it a maximum of 192 kbps as I have heard mentioned? If so, the whole thing is a bust. I have a feeling that this entire thread is outside my domain, being more "listening to the sound" than "listening to the music". I am not qualified to discuss with Audiophiles.
On the technical level: USB2 has a limit of 480 Megabits per second - fully sufficient for HD video, more than 2000 times the 192 kbps you have been hearing about.
Certainly, noone should pretend that USB is free of protocol overhead, no capacity wasted in waiting and negotiations. An application level connection will never obtain an effective application end-to-end performance close to 480 Mbps. But for plain sound, you are orders of magnitude from the bandwith limits. USB is perfectly fine for your use.
|
|
|
|
|
Chris C-B wrote: What I want is true CD quality - which I am paying for with Idagio+ - but not sure how to get it from the Win7 laptop I am using to the HiFi system without quality loss, which is currently apparent using the DAC built into the laptop.
If the only input to your "HiFi" is RCA, I don't think you should worry too much about any conversion that might take place elsewhere. Or am I misunderstanding what you're trying to do?
The way I read it, it's like someone who wants to put some video on VHS, but is worried about a 4K to 1080p conversion before sending the final thing over as an analog signal...?
|
|
|
|
|
I would highly recommend the FiiO K3 - it is sold as a "headphone amplifier" but also has line and RCA/optical out. It will do your required decoding up to 384kHz/32 bit.
|
|
|
|
|
Chris C-B wrote: What I want is true CD quality
https://en.wikipedia.org/wiki/Compact_Disc_Digital_Audio:
The standard also specifies the form of digital audio encoding (2-channel signed 16-bit Linear PCM sampled at 44,100 Hz)
When you talk about 192kbps, are you *sure* it's 192k*bps*, or a 24bit 192kHz DAC converter?
True, CD quality is 704kbps (16bit*44kHz), and the 192kHz 24bit dacs are actually (suppose) to be doing 4608kbps...
But to be honest: the problem with most USB DACs is the quality and price of the interanls and shielding, not really the kbps, as they start typically at 48kHz 16bit DACs (CD and better "quality") but its the other interference that needs to be "handled" that makes their sound quality poor.
Also, "upsampling" isn't necessarily goining to make it sound better from 44kHz going to 192kHz
|
|
|
|
|
Maybe you can use a TV DAC, if you are planning to upgrade your TV someday and have the TV in the same room as your audio system.
I used to have one of those cheap hdmi splitters and it is resting in a drawer somewhere. It sounded awful.
Please consider that my amplifier is not a high end one, it is an 1983 AKAI, considered a cheap one in its day, but it packs its own punch
In 2018 I bought a SONY Bravia TV which includes a more than decent audio DAC. Inputs are: network (DLNA/UPNP... wired or wifi), chromecast, hdmi and USB (memory stick or hard disks), probaly also bluetooth. Output is a 3.5 stereo jack in 3 modes (headphone, fixed and variable which is controlled by the volume on remote).
Android TV gives plenty of choice for software, I use the included Chromecast audio receiver controlled by HiFi cast on my phone to play FLACs on my PC, and HDMI for CDs that i put in a blu-ray reader. Streamed FLACs and wired CDs sound so close that I cannot tell the differences.
I compared the Bravia audio out with the one of a Chromecast audio, the Bravia sounds distinctly better.
|
|
|
|
|