|
As far as solutions that would resolve to producing a mountain of code, a good example was my graphics library - getting it off the ground required me to resolve at compile time, mind you, various bit shifts, masks, and even certain operations like pixel type conversion since different pixel formats yield different actual types. I needed to do it all because (a) without a pixel, I couldn't draw anything, and (B) I needed to validate that what I was doing was even possible and architecturally sound before I built anything else on it. I needed to make sure it could actually DO all the things I needed it to do at compile time. That was hours at godbolt.org
Basically I had to make half of this file before I could even think about making anything else.
gfx/include/gfx_pixel.hpp at master · codewitch-honey-crisis/gfx · GitHub[^]
And that's not counting my bits library it uses, which is insane, but I was able to test that separately.
1. OOP is designed to abstract in order to manage complexity, sure. But it can only get you so far. The file I mentioned previously uses OOP concepts, even though it's GP. And yet, there are a lot of moving parts. You have the pixel class, the channel_traits, all the little helpers, etc.
2. Basically true, yeah. In my present situation I'm dealing with an API that I didn't design and making a common API between it and Arduino. The Arduino lib abstracts a lot, and doesn't give you access beneath the abstractions. The ESP-IDF on the other hand, is much more low level and requires a lot of boilerplate and groundwork - setting up an event handler, setting up a chunk to stream adapter, setting up a bunch of config struct fields for the request. etc. I need to expose everything at at least the level of abstraction the Arduino side exposes things at in order to provide a common interface. On the ESP-IDF side that's a lot of work. And an HTTP request won't go through until you get all the boilerplate correct.
3. Yeah. That's what I'm doing here
4. I mean, yeah i could say "i made an http request" without making it, but then what?
5. I can't stub out APIs I didn't design.  This one is an all or nothing situation. I either make it all work right or it doesn't.
Adding, I could probably have written this in the time I've procrastinated it, so I think it's more of an emotional/stress related issue more than anything.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
Very interesting discussion. Just as i thought, there is a lot here that is way down at the metal it seems those are the thing where you just have to do it to do it. 
honey the codewitch wrote: I could probably have written this in the time I've procrastinated it, so I think it's more of an emotional/stress related issue more than anything.
I totally get this. I have some ideas I'm trying to work on too and when it comes down to it, there is just a lot of work and a lot of code to actually type and it gets a bit overwhelming.
Usually once I start working on it I do get absorbed and take off with it (I think you're like that too) but there is definitely a Resistance when confronting the mountain of work to do.
|
|
|
|
|
If I may jump into your very interesting discussion with a small observation drawn from decades of practice:
"Design top-down; implement bottom-up"
To take your example:
DrawRectangle(Point startPoint, int width, int height) What happens if width or heights are negative numbers? What if they are 0? Do I throw an exception? Should I just ignore it? Either you design exhaustively and are prepared to contemplate all possibilities or you start from the other end and discover all the obscure conditions and corner cases as you build up your project.
I could keep hammering down this point discussing integration of external components and other such things, but assuming you accept my suggestion and start building from bottom up, it could be quite a long time before you have something that you can start debugging. You can shorten this time (I call it the "valley of despair") by building unit tests. These will give you some confidence that at least individual bricks more or less work.
If your initial top-down design was not completely crap, the bricks you made will fit (approximately) in your project. It is now the time of integration tests and functional tests to shake up your edifice and smooth any rough corners that remain.
Throughout this process document, document, document. If you need the DrawRectangle function in another project, it's much easier if you know all the little quirks it has without having to read the code.
Mircea
|
|
|
|
|
Let's talk about Draw Rectangle, because I actually solved that problem in the wild.
draw::rectangle(destination,rect16(0,0,99,99),color_t::purple);
The draw class acts on "draw destinations" which are like canvases. The first argument is always this target. In this case destination above
The second argument is always the location(s) of the object to be drawn - in this case, a rectangle with unsigned 16 bit coordinates. (my lib uses rect16 for that, or srect16 for signed)
gfx/include/gfx_positioning.hpp at master · codewitch-honey-crisis/gfx · GitHub[^]
Before I built the drawing operations, I built up the position elements, as shown in that file.
Rectangles can be normalized, or denormalized, and have a fundamental orientation in my libraries.
For draw::rectangle, the orientation is irrelevant, so rect16(99,99,0,0) would be equivalent to that routine.
rect16 newrect = myrect.normalize();
myrect.normalize_inplace();
That will ensure the rectangle's dimensions are intelligible to this routine. Some routines honor the rectangle orientation, such as draw::bitmap, which can flip the bitmap on the x and/or y axis.
I built this constructively. Or at least, i'd get to the point in the drawing code where I needed, say a rectangle element, and then I went back and designed the positioning elements as exhaustively as I could at the time.
I then continued where I left off with my new toolbelt of rects, points, sizes and paths.
Doing this I've managed to create a library that has survived several years with hardly any major architectural changes, and very few breaking code changes, none recently.
I was careful. I was fastidious. And one thing I did that I don't normally do is I designed for completeness rather than for use cases, primarily because I didn't have all the use cases my end users (including me) would use it for in front of me. So I envisioned a model of completeness and coded to that.
Take a look at that positioning code and you'll find I covered pretty much every eventuality.
Like I said, I normally don't code that way, but in this case, breaking my rule served me well.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
If I understand you correctly, you followed my mantra: "Design top-down, implement bottom-up".
Mircea
|
|
|
|
|
Indeed.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
My mantra as well
"Design top-down; implement bottom-up"
"A little time, a little trouble, your better day"
Badfinger
|
|
|
|
|
I can always plan my coding in minimal incremental steps that allow to use mock data to test results of each step.
But I am unsure how possible that would be in your case, after all I never did hardware related stuff.
|
|
|
|
|
Entered the living room this morning and I immediately noticed the giant splash of water near the back door.
The rain is seeping through the ceiling through a leakage that seems to be about a meter wide 
It's been raining for about a month, but never had this problem until last night.
This sucks big time! (not quite the expletives I uttered this morning, but let's keep it civil) 
|
|
|
|
|
I know it is not the best answer, but if water only drops from the upper side, be happy.
It could come as a wave through the doors, bringing mood, oil from the crashed cars and many other things (like fecals, dead animals or similars).
We have had the strongest rain week of the last years, the basements of most houses got full of water, a colleague lost his car, another one had to be evacuated... luckily I wasn't directly affected
Damned extreme weather
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
Yeah, could be worse, although floods like that don't really happen where I live (well, not since "the disaster" of '53).
We've had the wettest May ever, so it's kind of weird it only started leaking now.
|
|
|
|
|
Luckily no floodings at the Mosel river where we are on holiday at the moment near Traben-Trarbach, also the weather is fine since our arrival last friday.
|
|
|
|
|
Could be worse - if we notice a puddle on the floor somewhere, it's usually one of our cats. 
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
That was my first thought too.
Not sure how cat going pee pee is worse than a structural defect in your house though 
|
|
|
|
|
Cat pee has a really strong smell, and it's very hard to get rid of. I bought a new set of motorcycle waterproofs, and before I got a chance to use them one of our cats managed to pee on the inside. Even jetwashering didn't help - I binned the set and got a new one ...
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Sheesh, I thought you were talking about a memory leak in a program!😳
|
|
|
|
|
i'm sure there's an ointment to help with leakage.
CI/CD = Continuous Impediment/Continuous Despair
|
|
|
|
|
Oh! You're talking about the roof. Sorry, I thought it was something ... medical. Yeah, we'll go with that. 
|
|
|
|
|
Had something similar happen due to a faulty vent on our roof, and near sidewise rain - I live in a really rainy region.
It flooded the INSIDE of our walls and was running through the doorframe of our coat closet. So that was fun.
I don't envy you, because I've been there. I do wish you the best of luck, and I hope it's an easy fix. It was in our case, relatively because we caught it before it did any expensive damage.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
I woke up this morning with lots of water just outside my bedroom window. Then I remembered we are on a cruise ship.
Within you lies the power for good - Use it!
|
|
|
|
|
That sucks. Take a look directly above the leak and to three or four yards (meters) on either side of the leak. Look for any beams sticking out and seal around these beams. This is what finally solved a similar leak in my house.
|
|
|
|
|
Why do people go out of their way to answer questions that we know should be in a different forum with people we know abuse the system? Like, what's the impulse to be the sucker? Not really referring to peeps we know who don't do nothing but abuse the system over and over, but to those who blatantly do not care and 100% of their posts is nothing but questions in the lounge.
And sure, we've all done it at times (myself included). And at times I'll attempt to help if there's no forum suited for the query in question that I know of at the time of replying and it's someone I know. Like for instance, Sander just had a networking question and only now do I realize there's a hosting and servers forum. Oops. So, I guess I'm a hypocrite. 
But, we know Sander and know he's not intentionally breaking the rules. Can't say that for some in the lounge (won't mention his name). So, why? Surely, doing nothing but answering tech questions to people exploiting this fact is not a dev's idea of being "social"?
Jeremy Falcon
modified yesterday.
|
|
|
|
|
Not to mention there is still someone trying to answer his questions in appropriate forums... 
"In testa che avete, Signor di Ceprano?"
-- Rigoletto
|
|
|
|
|
I think it's partly because folks know their post will be seen pretty much immediately in The Lounge.
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
^ This.
It's not laziness, it's just increasing the odds someone that possesses knowledge on some obscure/very specific topic will see it and offer a response.
Who in his right mind regularly looks at all the forums?
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
