|
I like to use https://pcpartpicker.com/[^]
They will show who has the lowest price. I have ordered from most of the recommended sources like Amazon, Walmart, New Egg, etc.
I really like the compatibility feature. Helped me avoid a few mistakes.
Also, it's a bad few years to build a new PC. I did it though and don't regret it. The better machine was worth a few extra hundred bucks. Don't look back!
|
|
|
|
|
If you have a Microcenter close by, that's my go-to place for components. I like just going in and wandering around. Shelves on shelves of components. Sometimes I get new ideas for things I didn't even know existed.
You said your GPU is only 3 years old. You didn't say what it was but you're probably not going to get anything better for cheap, these days. If you use the on-board GPU on the CPU, you'll be sharing some of your memory with the GPU, so you'll probably need more memory.
You ought to consider whether you want a CPU that's compatible with Windows 11. If you're going to keep this machine for a while, you may be wanting to upgrade.
modified 19-Jan-22 14:06pm.
|
|
|
|
|
I had not heard of Microcenter, but none is any where near me.
My old GPU is a GeForce NTX 1080 ti, which was $350 USD four years ago (it's older than I thought), and now retails for $500. It's working well enough for me now, so I'm sticking with it. At some point I'll replace it, when the price is right, or when this one craps out.
The CPU I ordered (Ryzen 5600X) is supported by Win11. I'll upgrade at some point, but am in no hurry to do so. Officially Win10 support ends in a bit over 3.5 years, but we'll see how that goes. MS pushed hard to get everyone off 7 and 8, and onto 10. Raising the HW bar for 11 has me wondering if MS will keep that schedule, or if they'll knuckle under to corporate IT dept that are not meeting that schedule.
That said, it's not a good idea for anyone in the Windows world to buy a CPU that is not supported by Win11.
|
|
|
|
|
If that GPU works for your games now, it will work with the new rig. Sounds like you’ve got plenty of experience building your own computers. Make sure the new mobo has a slot that will accept your GPU, but I expect you’ve already thought of that.
One more note, if you get a mobo that has an M.2 slot that supports PCIe x4, it would be good to get a compatible M.2 SSD. You can get a 500Gb Samsung 970 EVO drive for a ridiculously low $70 on Amazon. That drive, in a compatible slot, is unbelievably fast. Like 6x faster than a SATA drive. I’ve put nothing but M.2 PCIe drives in all my builds for the past few years.
You’ll need a Windows license too. I’ve been buying Win10 Pro OEM licenses (actually, all I buy is the activation code) from various people on eBay for around $30-$40. So far, I haven’t gotten burned on one.
|
|
|
|
|
I've been building my own PCs for 25 years. That doesn't mean I'm an expert, as I don't do it all that often, and it gets harder over time as their are SOOO many new technologies and choices! So I research things and learn, and have the experience to figure things out. Plus threads like this help a lot.
The new MOBO covers everything I need. I went through the specs of 2+ dozen boards before deciding. I've been looking at this, off-n-on, since last summer.
Yow! The price on that M2 is great! However, I'm considering getting the 1 TB for $115 USD, as in the long term a larger drive is more useful. Gotta talk to the budget director (AKA wife) about this.
Windows licensing is not an issue, as a have a multi-activation key through Windows Dev Essentials. Once a key is claimed, it's yours. I just checked the key for Win10 also works for Win11
|
|
|
|
|
Disk benchmarks on SATA-connected SSDs usually top out in the 550MB/s range. Magnetic spinners top out around 200MB/s (sequential read/write, they are terrible at random operations). M.2 PCIe SSDs top out around 3600MB/s. The difference in response for disk-intensive applications is very noticeable. If you still have spinners, it's likely they are the main bottleneck for overall performance, especially with the new MOBO, CPU and memory.
I've been replacing spinning hard drives with SSDs in laptops for friends and family for several years. The difference in performance is noticeable, even if the replacement is just SATA. My "budget director" is still using a 10-year-old laptop that I swapped disks on and is happy with it (went from a 5400RPM spinner to a SATA SSD). Cost less that $70 to make it almost like a new laptop.
|
|
|
|
|
That happen to my Dell T3600 Workstation after about 7 years. I have 32 gigs of Ram and 16 disappeared.
It turned out to be the board and not the RAM. I was bummed. But RAM is pretty tough, never really had a RAM stick go bad on me. Mostly just incompatible RAM not working right because I bought it from Frys. But that was last century.
Found a replacement board on EBay for $50. Now all 32 Gigs work. But I had to software license everything again, and that finally got me in trouble with the BSA about a month later. I'm still using this rig, been 10 years now I think. Took me a few of months to settle with the BSA.
My new Rig that I ordered from Dell Nov 15, 2021 shows up today. Bought a new Dell 5820 with a 10 core Xeon and RX A400 card. NVMe boot drive. Just bought a 2nd Flex Chassis for M.2 and another SSD SATA drive for long storage, plus new Microsoft/Adobe software license keys. It's the most I ever paid for a computer. Also bought a new EOS R6 Camera and RF 24-70 lens for my product photos and new 4K videos to advertise with.
The case for replace is to beat inflation, hindered by supply chain shortages. Add on boosted productivity and extra power to pursue more complex stuff like AI, or mess with crypto currencies.
The case for repair, well not much of a case, except for perhaps saving money, but maybe open a can of works with software licensing if you have to replace the board. Having old slow ports like old USB.
Up to you really. For me it's the year to up my game with modern hardware to match or exceed my skill level. So far all the new stuff I have purchased over the last 2 years has paid off huge for me with big ROI! If you see the potential go for it and buy new stuff.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
Given that my CPU, MB, and RAM are 8 yo, once I thought it through, repair was nothing within my personal risk tolerance. While a MB failure would cost me no data, the desktop would be down until I got a replacement in, which could take weeks. Since I know I have a HW failure, it makes the most sense to replace it.
I considered an M2 drive, but the prices are high enough at this point that I went with a standard SSD. I replace the HD every 2 years or so -- we'll see what the market looks like in 2 years.
Current cost was reduced by keeping the case and the GPU. It's most likely I'll replace the case first, as it's the cheapest component. The new MB I ordered supports USB 3.2, so I'll need a case with a connector on the front.
Which reminds me -- I need to check which fan sizes my current case needs. Despite periodic cleaning, the case fans are looking rough and have gotten louder. If I'm tearing everything apart, it makes sense to replace the fans.
|
|
|
|
|
That sounds like a good plan. I think you made the right move.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
Yes RAM reseating often works.
You haven't mention the first most important thing and that is what do you use it for and neither the second thing what are the specifications - make, model, motherboard, CPU, RAM speed, etc. oh and what operating system?
Replacing the hard drive with an SSD always speeds up the older computers.
|
|
|
|
|
This PC is my everything PC. Gaming, programming, and general use. Gaming & programming drive the hardware, especially gaming and video.
My final choice is a an AMD Ryzen 5 5600X. I considered other models, looked at benchmarking and reviews, and finally at price. It seemed like the best bang for the buck, and one that I'll have no problem using 5 years from now.
RAM is 3200 -- that's what the MB and CPU are rated for, so getting faster didn't make sense.
MB is an Asus, but depending on ship date, I may have to make a different choice.
|
|
|
|
|
Sound like a good choice.
|
|
|
|
|
Tangential involving exactly the same identical direction. (10)
Sorry peoples. I was a level too deep in multitasking when I posted the clue.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
modified 18-Jan-22 6:14am.
|
|
|
|
|
UNILATERAL?
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
No
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
|
|
|
|
|
That's a relief because the only anagram I could find was "altenating" and it isn't that!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
modified 18-Jan-22 5:01am.
|
|
|
|
|
How did you get alternating ?
"Life should not be a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming “Wow! What a Ride!" - Hunter S Thompson - RIP
|
|
|
|
|
By throwing in an extra "R" ...
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Fixed.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Equivalent ?
"Life should not be a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming “Wow! What a Ride!" - Hunter S Thompson - RIP
|
|
|
|
|
Nope. Sorry for delay, I've been working at Fire Control, just got home.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
|
|
|
|
|
|
Nope. Can't decide if it's a good clue or a really bad one if three prime suspects don't get it.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
|
|
|
|
|
I initially thought it was a straightforward anagram but I can't make anything of it
"Life should not be a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming “Wow! What a Ride!" - Hunter S Thompson - RIP
|
|
|
|
|
Tangential involving exactly the same direction. (10)
Okay, so this theory probably breaks a few of the normal rules:
Direction - informs us that the previous words "exactly the same" is an instruction to follow.
Answer therefore is tangential.
Just putting my coat on ...
|
|
|
|
|