|
Back when I started, the answer would be 'every fortnight'. It took that long for your coding sheets to be sent away, mispunched, and a program listing with error messages to be sent back. So, you'd rewrite the mispunched rows, sent it off, wait a fortnight to see if it had been repunched correctly. Sometimes it would take a couple of months before you got a program that was what you had written. Then you can move on to the next stage. Needless to say, desk dry running was a lot more rigorous - a potential bug found at that stage could save weeks of waiting. The problem with this is that you tended to put too much code into each iteration, so when you got anything usable back, there were too many places to check (and it was so long ago when you wrote it that even the copious comments weren't helpful.
That habit has been hard to break. Even when we punched our own cards and submission / turnround times were only a few days, compiling was seen as a milestone (or a millstone).
I had to train myself to write small blocks of code, test, write the next bit, test, repeat ad nauseum.
|
|
|
|
|
jsc42 wrote: 'every fortnight'
Reminded me of the timepromptwait parameter --> it was measured in microfortnights
But I never wave bye bye
|
|
|
|
|
Fortnight? goo! In school it was drop the deck off ( we punched our own ) ( and drew lines on top as "hex marks" ), and pick up the printout next day or so. ( Of course, waiting a fortnight would have made class _difficult_. )
When I started work, we had ( Bruce and I ) the machine to ourselves. I atemped to compile about 3 times - about 10 lines of Fortran. Failed in the library. Found that no-one else had any luck with the compiler yet either. ( PDP11, 16K WITH the integer multiply / divide unit ).
Still punching cards, but no compile, assemble, test, ( CPU switches and lights ) sometimes patch at the CPU.
dave of eves
|
|
|
|
|
As a maintenance programmer, it's fairly often. Make my little adjustment and try it out.
I have discovered that I enjoy fixing the bugs that other people create a little better than striking out on my own. I get to make things better and complain about other people's work.
I think it has to do with the way my brain works. I can't visualize future events so I have a hard time setting goals (which drives the wife crazy) but I can problem solve and dig down deep.
|
|
|
|
|
Depends on what I'm doing. If I'm doing layout/markup, it's very often. If I'd doing c# code (models, viewmodels, other stuff), intellisense kleeps me from doing stuff wrong up front, so the act of compiling is much much less frequent, and I only start compiling when I feel like a code compenent is ready to test.
".45 ACP - because shooting twice is just silly" - JSOP, 2010 ----- You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010 ----- When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
I don't ever just compile. I just run the code, which compiles and then executes it.
Social Media - A platform that makes it easier for the crazies to find each other.
Everyone is born right handed. Only the strongest overcome it.
Fight for left-handed rights and hand equality.
|
|
|
|
|
... as often as the wife lets me? Ohhhhhhhhhh....
No but seriously, I compile anytime I make a significant change or fix a bug. My app right now is on Build 1017. Been developing this one for about 12 months. I think that works out to an average of 4 compiles per business day. However I say I would only work on the app half the time so when i'm working on it, like 8 compiles per day!
|
|
|
|
|
(C++ here)
I compile often; but it depends on the task, when doing new code, I will often do a lot of basic coding without compiling; when doing maintenance, it will be more often.
We use incredibuild; so we can rebuild everything in about 6 minutes.
I'd rather be phishing!
|
|
|
|
|
Maximilien wrote: (C++ here)
I think its significant that you mention language.
I think which language (build tools, etc) a person is using makes a big difference.
And the size of the project -- how long it takes to compile it -- back in the day when computers were slower this had more of an impact.
And I think the OP is talking about the REPL[^]
You write the code, evaluate it, run it, see what is wrong and then try it again.
That all depends upon how long it takes to run the project again. If it takes 30 minutes then you probably write more code and then try it. If it takes seconds to run it again, you probably write one line of code and try it.
|
|
|
|
|
raddevus wrote: If it takes seconds to run it again, you probably write one line of code and try it. Under that premise I am currently doing this by every small closed function I program, to test if it does what I want to achieve (unless things that are pretty obvious and then I cumulate until next "Let's see"). Executables are less than 1 Mb, so the only F5 that takes a bit more is the first of the day.
When working on PLCs I programmed full units / sequences before transferring for the first time. Not so many "Test" options there...
I remember one project... the customer was already getting nervous because it was T-3 weeks to deadline and the machine had never moved until that moment. One day I said... ok, I am so far.
Transferred PLC and Robot. Two more days teaching all the motion points in the robot. 2 days testing / fixing. 1 day to let the operators test the process. One day with the official protocols... Finished 1,5 weeks before deadline, which I used to do the training and so on. The customer just flipped out (and apologized to me for the stress). My trainee was like
I whish I had that more often...
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
No hard and fast rule.
Sometimes, incremental with small changes. Most of the time, however, when quite a lot has changed. In general, however, 'quite a lot' is compartmentalized in a single function (method, class, whatever) - so I know where to go.
And the compiler will usually give me a hint.
But mostly, I work on a shadow copy of the production code. Identical in all respects (i.e., copied directly from it) so I don't cause harm to production. When all is well then I copy the shadow files to the production analog. Internally, they actually reconfiguration themselves during compile (or execution for scripting languages) - a sort of self-awareness based simply on the file checking it's own name.
So - I can fearlessly go where I have probably have gone before - although it was in a different place.
Ravings en masse^ |
---|
"The difference between genius and stupidity is that genius has its limits." - Albert Einstein | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
I reject the premise of the question.
|
|
|
|
|
Okay, I'll bite: what's wrong with the premise? You've piqued my curiosity.
Software Zen: delete this;
|
|
|
|
|
My code is like the cow in The Restaurant at the End of the Universe - It executes itself!
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
|
Frequently, especially if the syntax for something is tricky (gives a stern look at C++ templates). I also tend to iterate a lot, given that our products are complicated and mistakes in the 'plumbing' aren't always easy to find.
Software Zen: delete this;
|
|
|
|
|
At my current workplace, there is one hard rule: You do not commit any code to the code base unless it compliles cleanly! So the question comes down to: How often do you commit?
In earlier jobs, I was used to committing when a module was reasonably completed and tested. You wouldn't find very many updates to each file. So when I switched jobs about ten years ago, it came as a surprise to me when my colleagues couldn't understand why I hadn't comitted that code change I had made before luch - they wanted to verify that it wouldn't break their code. I was frowned upon if I didn't make commits at least several times a day. Sometimes, a colleague could hang over my shoulder to see me type in the code, compile it and commit it, before going over to his own desk to check out my new code.
I quickly learned that as the appropriate working mode in this company. But I am not going to defend it as an absolute rule. Not even as a main one. And you wouldn't believe the amount of processing power required when 100+ developers commit a dozen times a day, and each commit triggers a backend complete rebuild, module testing, linking and integration tests of the entire system.
The documentation guys, too: For a while, they had a system that rebuilt all the volumes of all the variants of the documentation at every commit - a job requiring more than an hour of CPU time on our fastest build agent. The technical writes had made a habit of committing for every paragraph they changed. We forced them to restructure their builds so that an edit only rebuilt the volume with the changed paragraph, and later only to those variants of that volume where the paragraph actually occcured. Still, the doc guys had to get their own multi-CPU blade server to get their jobs through fast enough.
|
|
|
|
|
With intellisense and other IDE features, compiling (though not the meaning it used to have) is pretty much unnecessary until you're ready to test. And of course in duck-duck-run languages, there is no such thing as compiling.
|
|
|
|
|
Looking at some of the responses, I probably should have asked "How often do you compile/test". It was really to get more insight into how often other developers stop coding to check their work.
|
|
|
|
|
It has to depend on familiarity, if I am simply doing CRUD work then I will code up an entire set of views before compiling. If it is more complex then I may compile after even minor changes.
Never underestimate the power of human stupidity -
RAH
I'm old. I know stuff - JSOP
|
|
|
|
|
Heavily depends on the situation. When I'm doing something somewhat complicated, like mixing libraries using different types (in a type-safe language like Delphi or C#) or nesting loops or anything I don't completely see through at the given moment, I compile very iteratively (hit F9, F5 or whatever key the IDE uses every couple minutes) to make the compiler catch the harsh mistakes. But when it's something I'm comfortable with and can firmly say I know exactly what's going on with what I'm doing, I may compile half an hour later. Or an hour.
Sometimes, I create a prototype construct, compile to see if it works at all and then, now sure that it works, expand it to what I wanted in the first place. Same goes for the inevitable case where I have to repeat myself a few times (because creating a truly generic solution would take way more time).
|
|
|
|
|
I used to compile constantly, but I also used to be young and made lot's of mistakes and compiling felt safe.
Nowadays I just type out whatever I'm working on in a single go and rely on IntelliSense to catch my mistakes.
In general, I don't have compiler errors anymore on a day-to-day basis.*
I never liked working through compiler errors one at a time.
I'm IntelliSense-4-life now.
* I now get compiler errors when it's 2AM and I'm drunk.
|
|
|
|
|
Like many others, frequency of compilation depends on what I'm doing. If I'm writing a processing routine that has no visual component, I probably won't compile until I've completed the first pass on it. This could be hours or days between compilations.
If I'm doing front end work? Much more frequently, as "what you think you're gonna see is not necessarily what you're gonna get".
|
|
|
|
|
I don't do manual compiles that often, but run debug, now that number has some correlation to how complete I am with the task.
|
|
|
|
|
It's not about compiling, per se, but about testing.
Some people like to write an entire chunk of functionality, then do all their testing, iterating at that level when they find the problems.
Some, (myself included), like to write a small chunk of the overall functionality, test it thoroughly, then move on to the next small chunk. This approach probably means less unit-level testing, but more integration testing, I suppose.
|
|
|
|
|
Think everyone develops their own habits naturally for me, as a Linux C/C++ developer, if it's maintenance I am doing fairly frequently as I am making my code changes. We work with eclipse and CMake so it's easy just to hit the build button.
But when I am adding a new feature and looking at my class diagrams (Dia, visio type). It normally happens at the end after I code a nearly complete class and add it to the CMakeList.txt file.
Think if people created well fleshed out class diagram first, it would happen less often when you start coding it, but then more often afterward.
|
|
|
|
|