|
I'd run Scandisk at boot (before Windows starts), to mark any bad sectors of the disc, then reinstall the video drivers.
Bad sectors don't necessarily mean that the disc is broken; it can just be magnetic anomalies that make parts of it unreadable/unwritable, so if you can replace the disc with a shadow copy, it might be "fixed" by simply formatting it.
If it's only a few sectors, though, it's not worth the effort; just mark them as dead and use the rest of the disc.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Bad sectors don't necessarily mean that, but "unknown errors" reported by the manufacturer's disk testing software (see the original post) may mean that the disk is in bad shape.
Given the relatively low price of storage these days, I wouldn't take the chance. If, however, the OP does decide take the chance, I would use the manufacturer's diagnostics to perform a low-level format before reinstalling everything from my backup. That is more likely than "chkdsk" to identify permanently bad sectors.
If you have an important point to make, don't try to be subtle or clever. Use a pile driver. Hit the point once. Then come back and hit it again. Then hit it a third time - a tremendous whack.
--Winston Churchill
|
|
|
|
|
The WD cr@pware always quits with unknown errors, even on new machines. I've never been able to run its complete set of tests.
As you say, discs are cheap, so going with the least time-consuming option would be my preference. If it doesn't work, scrap the disc.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Neither scandisk nor chkdsk will run; both bail out. The recommended fix is to Restore to a date when the problem wasn't happening, but I have no idea how far back that might be. But once I get the new drives installed and the files transferred, I'll reformat this one and make a portable of it.
Will Rogers never met me.
|
|
|
|
|
A real case of the Murphy's -- it's broke, and so are the tools to fix it.
I got one of these[^] for days like that (and for the pile of "spare drives" that has grown way too high, over the years).
It's cool to be able to plug a drive into a different machine without opening boxes and fiddling with cables.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
If you are installing a Western Digital drive: Download a free copy of the WD version of Acronis from the WD website. With Acronis you can make an image of your systems drive from time to time. This means you can restore your systems drive to exactly what it was at a certain point in the past in about 10 to 15 minutes. You can even restore it to a completely new drive. Acronis creates a bootable CD that has all the software to install the image on any drive. It is more dependable than System Restore (and more flexible). I snap an image after every major Windows upgrade. By the way: The free WD Acronis only works if it sees a WD drive attached to the machine. If you don't have a WD drive, you can buy the full version of Acronis.
I must say that I have been using only WD drives in many machines at home and at work, and have never regretted this choice.
|
|
|
|
|
I'm definitely planning to get the Acronis product; that's a tool long overdue on my machine!
Will Rogers never met me.
|
|
|
|
|
I have been using it for many years with good results. The user interface is a little counter-intuitive and takes getting used to, but the software does its job!
|
|
|
|
|
One more thing: When taking an image, it must be stored on a drive different from the drive you are imaging. I have a separate drive that connects through a USB 3 port and that works fine. USB 2 also works, but is slow when doing a 40 or 50 GB image.
|
|
|
|
|
Is a fresh install possible? Since you're starting from scratch, so to speak you don't want to copy over problems if any. Fresh install and copy data!
New version: WinHeist Version 2.1.0
My goal in life is to have a psychiatric disorder named after me.
I'm currently unsupervised, I know it freaks me out too but the possibilities are endless.
|
|
|
|
|
I could probably do that, but I really don't want to take the time to re-install everything, especially since I'm not sure where all the CDs might be hiding. Some of the stuff I have is rather hard to install, like ESRI ARCInfo. What I may take the time to do is to clean things up by removing files I don't need - I can do that in a few evenings after work, I think - then make an Acronis image on one of my portable drives, from there it should be a snap to get it working again.
Will Rogers never met me.
|
|
|
|
|
Yeah I know it's a PITA, takes forever to get things back to the way they were!
New version: WinHeist Version 2.1.0
My goal in life is to have a psychiatric disorder named after me.
I'm currently unsupervised, I know it freaks me out too but the possibilities are endless.
|
|
|
|
|
After taking an Acronis image: Use Acronis to verify the image. Images are large - mine are around 40 GB - and one bit out of place in the image will ruin it. I rarely do get an image that fails to verify, rendering it useless. This is probably due to defect on the drive, more than a fault of the software. It is just worth while to verify!
|
|
|
|
|
You seem to be fairly up to date on this, so I ask, if I'm upgrading to a RAID 1 array using the hardware and BIOS level configuration, will the WD version of Acronis work? The documentation says that this version doesn't support RAID arays, but it seems to me that, if this is done in hardware, the Acronis will 'see' it as a single drive. Is that correct?
Will Rogers never met me.
|
|
|
|
|
let's see... 24Gb RAM and 2Tb HDD.... hmmmmm... *might* be enough to run chrome with a couple of tabs open
"mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them"
|
|
|
|
|
Quote: *might* be enough to run chrome with a couple of tabs open
You are maybe a little optimistic?
|
|
|
|
|
|
|
story said: A plan devised after a few "cold drinks" to drive a snake out of a caravan has not ended well at property in Darwin's rural area.
The opening sentence says it all.
I might add she lived near Humpty Doo.
Once you lose your pride the rest is easy.
In the end, only three things matter: how much you loved, how gently you lived, and how gracefully you let go of things not meant for you. – Buddha
Simply Elegant Designs JimmyRopes Designs
|
|
|
|
|
Pff... this news don't even have a croc in it!
Must have been a slow news day!
At least she had a drink, that's the local way!
|
|
|
|
|
Where was that?
"in Darwin's rural area"
Where?
"in Darwin's rural area"
Hold on, could you repeat that? I thought you said...
"in Darwin's rural area"
Oh.
OK.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Yep.
"had a bit of a think about it"
Peter Wasser
"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell
|
|
|
|
|
|
|
He's really talented.
Saw the first one, guy on a step ladder the other day and really liked it.
New version: WinHeist Version 2.1.0
My goal in life is to have a psychiatric disorder named after me.
I'm currently unsupervised, I know it freaks me out too but the possibilities are endless.
|
|
|
|