|
"Flocculate": "cause to form into small clumps or masses."
The reason why pigmented inks have a use by date, and if you ignore that it gets expensive if the "last chance" filter in the printhead gets blocked.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
OriginalGriff wrote: Flocculate
We go to considerable lengths with our inks for the same reason.
Software Zen: delete this;
|
|
|
|
|
That's why I stuck a 5 micron inline filter to protect the 10 micron filter in the printhead from the 2 micron particles suspended in the ink.
Explaining that to the MD took a little longer than I thought was strictly reasonable.
Specifying that 5 micron filter and it's housing as a single mandatory maintenance part (with the attached high-profit price you'd expect) ans a defined replacement schedule did it in the end.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Your drawing made me think of the photolab where I had a summer job in my student days - years before the arrival of digital cameras. Prints were made by exposing the film frames one by one, side by side onto a strip of photosensitive paper. A roll of such a paper strip would hold several hundred photos. After exposure, in a darkroom, the strip was pulled over a roller into a container of developer chemicals - down and up, down and up, three or four sets of rollers (like in the drawing). The next roller took it over to a container with a stop bath, then to another one removing all undeveloped silver. (This would be the black&white process; it was in fact a color print developer, which requires several extra baths.) At least eight to ten paper strips was pulled over the rollers, side by side.
Those people handling the developer machine referred to it as the "sprosser". When I asked where that name came from, they didn't have a clue. It's just the name of it. This was in Norway, and the Norwegian word for "rung" is "sprosse", so I figured that it was the rollers (sort of rungs, sprosser) that had given name to the machine.
... until I heard one of the certified engineers referring to it as the "prosser", and a little later in a somewhat more formal setting as the "processor" ("processing" a print was a common term in those days for putting a photosensitive paper through those chemical processes). Aha! So when chatting with the others (who mostly had no formal education in the field, they had only learned to do the right moves), I started referring to the machine as the "prosser", not the "sprosser". I was corrected on that: It is called a "sprosser"! My attempts to explain that is was a processor, "prosser" being a shortform, was bluntly rejected as academic bullshit from a youngster who thought he could teach people with many years experience the name of things! ... So I went back to calling it a "sprosser" for the duration of the summer job, keeping it as a story to tell many years later 
|
|
|
|
|
Cool story; thanks!
Like you, I've reached an age where I enjoy telling the old war stories as much I do writing new ones.
Software Zen: delete this;
|
|
|
|
|
I thought festoon meant to adorn with flowers or garlands, or even the just the garland itself.
I guess your printing press is festooned with garlands of rollers.
#SupportHeForShe
Government can give you nothing but what it takes from somebody else. A government big enough to give you everything you want is big enough to take everything you've got, including your freedom.-Ezra Taft Benson
You must accept 1 of 2 basic premises: Either we are alone in the universe or we are not alone. Either way, the implications are staggering!-Wernher von Braun
|
|
|
|
|
Festoon[^]; I think the 3rd noun definition fits best.
Software Zen: delete this;
|
|
|
|
|
Did you ever react to the term OCR - Optical Character Recognition? What is "optical" about comparing bitmaps of scanned images, sliding them up and down, scaling them, skewing them to make them match some target bitmap? There is no optics whatsoever involved!
In the old days, OCR was performed by pulling physical masks over the printed text - not scanned/digitized, but the hardcopy printout. After advancing the physical copy to the next character, you slid a black band of masks across it, with cutouts for each character. If the black print character matched the cutout perfectly, then it would be all black and the photocell picking up the reflected light (or rather: the lack of it) would flag the position of the mask band as the most likely character. (The most fancy systems displayed the mask through a zoom lens to project the mask onto the physical print, so that it could be matched to different font sizes.) Then the next test was performed, with a white mask band that was slid across the printed character, and the the cutouts inicated where there was not supposed to be ink. Say, if a vertical slot in the first band could match either a T or an I (assume sans serif), a cutout for the flanges of the T could indicate to the phototocel that this is indeed an I (all white), or is a T (lower reflection due to the horizontal line of the T being black through the cutouts.
This was the REAL Optical Character Recognition! I have had quite a few youngsters staring open-mouthed at me when I explain this to them!
|
|
|
|
|
|
|
Cloud
Elephant elephant elephant, sunshine sunshine sunshine
|
|
|
|
|
Huh. For some reason, I always thought 'festoon' meant to decorate.
In this industry, we use silly words like 'test', 'design', etc. It's o.k. though, nobody means it here.
|
|
|
|
|
I was a press operator for a few years. In our plant we call festoons dancers. The printing industry is full of weird words/phrases. Dampener (dampner?), bustle wheels, cuim rollers, and so on.
|
|
|
|
|
"Nip rollers" :snicker:
Software Zen: delete this;
|
|
|
|
|
Festoon: a chain or garland of flowers, leaves, or ribbons, hung in a curve as a decoration.
Quote: What silly words do you folks have to use in your industry?
Manager
Deadline
Requirements
Testing
Expertise
Framework
Agile
Refactor
[x] Driven Development
Secure
High Priority
Shall we go on?
|
|
|
|
|
Gary Wheeler wrote: What silly words do you folks have to use in your industry?
agnostic - as in, our server app doesn't have apriori knowledge about what gets plugged in into it (as long as its API conforms to a standard) or who communicates with it (as long as are properly oauth'd in).
Cheers,
Mike Fidler
"I intend to live forever - so far, so good." Steven Wright
"I almost had a psychic girlfriend but she left me before we met." Also Steven Wright
"I'm addicted to placebos. I could quit, but it wouldn't matter." Steven Wright yet again.
|
|
|
|
|
I've had to use atheist API's before - the server wouldn't allow your connection, no matter what you tried.
Software Zen: delete this;
|
|
|
|
|
Gary Wheeler wrote: the server wouldn't allow your connection, no matter what you tried.
Hmmm. That waitress in the bar last night was an atheist. I had no idea!
Cheers,
Mike Fidler
"I intend to live forever - so far, so good." Steven Wright
"I almost had a psychic girlfriend but she left me before we met." Also Steven Wright
"I'm addicted to placebos. I could quit, but it wouldn't matter." Steven Wright yet again.
|
|
|
|
|
Maybe it was your feet of clay. Next time, wear better shoes .
Software Zen: delete this;
|
|
|
|
|
Certainly, the most common use of "agnostic" is in the religious sense ("If god exists, he must be defeated!")
Linguistically speaking, "a-gnostic" simply means "not-knowing". It doesn't have to be related to religious concepts at all.
|
|
|
|
|
out of a codeproject mug
thanks Chris and team.
Real programmers use butterflies
|
|
|
|
|
Congratulations once again
Thanks,
Sean Ewington
CodeProject
|
|
|
|
|
i don't know what voodoo you used to make this mug work so well, but thank you.
i got it this morning right in time for a cup, and it was magic ever since.
Real programmers use butterflies
|
|
|
|
|
when brewed by someone you love....
__________________
Lord, grant me the serenity to accept that there are some things I just can’t keep up with, the determination to keep up with the things I must keep up with, and the wisdom to find a good RSS feed from someone who keeps up with what I’d like to, but just don’t have the damn bandwidth to handle right now.
© 2009, Rex Hammock
|
|
|
|
|
I always make my own coffee. 
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
