|
Your connection to this site is not secure.
Just like your connection to the IoT 
|
|
|
|
|
If you rip a hole in a net, it has fewer holes.
Doesn;t that mean you just fixed it, a bit? 
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
...there will be less fish to fry...
|
|
|
|
|
|
But ... "Bigger is better".
Or ... "Size doesn't matter".
Take your pick! 
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
OriginalGriff wrote: But ... "Bigger is better".
Or ... "Size doesn't matter".
Do your sheep even care? 
Socialism is the Axe Body Spray of political ideologies: It never does what it claims to do, but people too young to know better keep buying it anyway. (Glenn Reynolds)
|
|
|
|
|
To find out, keep going until it has no hole left in it, I guess.
Not sure what you'd call what you end up with however.
|
|
|
|
|
A single length of string (If you undo the knots in the right order  ).
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
|
Given that Griff was talking about "ripping a hole" in that net...I don't think you'd end up with anything like a string. Many short ones, maybe...
|
|
|
|
|
And today, cardstock (even 200gsm photo laser paper) feeds perfectly.
And I know why. Humidity.
I got rid of all my inkjet stock before the printer arrived, leaving only my plain uncoated paper (mostly just my "standard" 90gsm A4 letter, and "impressive" 120gsm A4 letter) so that no-one - not me, not Herself, not even the cat if he works out how to print - will accidentally feed it though and bugger the imaging drum, and ordered some 200gsm laser photo paper for cards. And all excited I tried to use it the same day. That's what the problem was: it had been stuck in a cold van in the pouring rain all day and had soaked up loads of atmosphere.
Today, I adjust my image for the 1cm offset that it seemed to need ... and it prints an extra 1cm border because the paper has dried out and feeds perfectly! 
I should have thought of that yesterday. "Dear Mr Samsung, sorry I suspected your kit, but ... "
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Printer manufacturers must feel the same way about paper many of us do about users. A necessary evil.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
|
|
|
|
|
They think about users in the same manner - only with more swear words, probably.
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
My poor little laptops c drive (119gb) filled up on Wednesday, I did not even realise I had an SSD but it was an early one so very small. Went and bought a 480gb Kingston SSD at the local part store in Cairn and asked them to fit and transfer the c drive. I was quite willing to pay the $150 for a professional to do the job but they wanted the machine for 5 working days - bugger off.
Went to the local one man show computer guy who said it could be done overnight.
Next morning he calls to say he is laid up with a bad back and that his attempt failed. I went around to pick up the machine and a couple of cables to do the transfer on my old desktop.
Downloaded Aoemei (OG gets quite eloquent with it's praises), nice UI seems simple enough so I start the transfer - 3 hours later I supposedly have my c drive transferred to the new disk.
Now for the dreaded part, physically swapping the drives, I hate hardware. As simple as 1 screw and a gentle tug on the drive fitting.
No boot drive Ffaaaaaarrrrkkkkk me!
For the next 6 hours I try rescue disk, Lenovo recovery, Windows 10 troubleshooting. Eventually I get windows to acknowledge there might be something it can work with. I then used the recovery drive I had taken the night before to reset the computer.
Except I now have 8 partitions where I used to have 3, download Aoemei partition manager because windows 10 will not allow you to extend a partition unless the vacant partition is adjacent to the one you want to extend and windows WILL NOT ALLOW YOU TO MOVE A PARTITION. Every other toll does this in their most basic operation.
I am now back to 3 partitions and all the installed software can see the D: partition with all the data on it  I hate working with OS's.
Next - Adventures with Xamarin Forms 
|
|
|
|
|
When cloning laptop drives, the failure rate is quite high if the target drive (the new one) is not installed in the laptop:
- Install the blank drive into the laptop
- Put the source disc (the small one from the laptop) into a portable case, and connect it to the laptop
- Boot the laptop with the cloning software's boot disc, and follow the instructions.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Yeah - when I tried it, it was a desktop, and I used the "Upgrade to SSD" feature. Physically added the SSD to the machine, it took half an hour for my 1TB SSD and then removed the HDD. Booted right up.
When I did a lappy, I removed the lappy HDD and connected it and the new SSD to my desktop and cloned from there. Then adjusted the partition size via Partition Assistant to use the bigger drive - 2 minutes I think - and fitted the SSD back in the lappy. Booted straight up and has had no problems at all.
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
 Mycroft Holmes wrote: My poor little laptops c drive (119gb) filled up on Wednesday, I did not even realise I had an SSD but it was an early one so very small. Went and bought a 480gb Kingston SSD at the local part store in Cairn and asked them to fit and transfer the c drive. I was quite willing to pay the $150 for a professional to do the job but they wanted the machine for 5 working days - bugger off.
Went to the local one man show computer guy who said it could be done overnight.
Next morning he calls to say he is laid up with a bad back and that his attempt failed. I went around to pick up the machine and a couple of cables to do the transfer on my old desktop.
Downloaded Aoemei (OG gets quite eloquent with it's praises), nice UI seems simple enough so I start the transfer - 3 hours later I supposedly have my c drive transferred to the new disk.
Now for the dreaded part, physically swapping the drives, I hate hardware. As simple as 1 screw and a gentle tug on the drive fitting.
No boot drive Ffaaaaaarrrrkkkkk me!
For the next 6 hours I try rescue disk, Lenovo recovery, Windows 10 troubleshooting. Eventually I get windows to acknowledge there might be something it can work with. I then used the recovery drive I had taken the night before to reset the computer.
Except I now have 8 partitions where I used to have 3, download Aoemei partition manager because windows 10 will not allow you to extend a partition unless the vacant partition is adjacent to the one you want to extend and windows WILL NOT ALLOW YOU TO MOVE A PARTITION. Every other toll does this in their most basic operation.
I am now back to 3 partitions and all the installed software can see the D: partition with all the data on it I hate working with OS's.
Next - Adventures with Xamarin Forms
An hour and a carton of Coopers Sparkling or Stout and I would ahve had it done. Should have visited your daughter Holden (I'm 20 minutes away) and could have had it all sorted over a barbecue.
Michael Martin
Australia
"I controlled my laughter and simple said "No,I am very busy,so I can't write any code for you". The moment they heard this all the smiling face turned into a sad looking face and one of them farted. So I had to leave the place as soon as possible."
- Mr.Prakash One Fine Saturday. 24/04/2004
|
|
|
|
|
Michael Martin wrote: could have had it all sorted over a barbecue
Truisms, now?
I mean, is there anything that can't be sorted over a barbecue?
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Yah but you are used to tinkering with the nuts and bolts. I am was purely software and development at that - bugger all this configuration stuff.
It turned out the hardware was a no brainer, 1 screw.
BBQ would be nice, next time I am down there... (we have not been to Sydney for years and have no plans to go)
Never underestimate the power of human stupidity -
RAH
I'm old. I know stuff - JSOP
|
|
|
|
|
rather u should have just made a bootable iso off the os media using rufus and installed a fresh os on the new ssd...besides there are videos on you tube how to remove the screws and upgrade the hdd to ssd etc...would have been faster...anyway
Caveat Emptor.
"Progress doesn't come from early risers – progress is made by lazy men looking for easier ways to do things." Lazarus Long
|
|
|
|
|
Clonezilla is free, boots from a live CD, and it transfers pretty much any partition type to a new drive (yes, this includes NTFS/Windows).
Last weekend, I used it to move a Linux boot partition from a SSD to a nVME drive. It took less than 10 minutes (of course, Linux is a lot lighter in terms of required disk space, so YMMV with regards to time required).
BTW, I never partition my OS drive. If I need one or more additional partitions, I add a 2nd drive to the system.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
I just came to a realization as I read that: When we had tiny drives, we partitioned the hell out of everything. Now that we have huge drives, nobody bothers. In fact, I'm at a point where the largest drives aren't large enough and I keep wanting to RAID a few together (mirrored, of course) just to get larger-still, single "drives". Best example: Don't give me a drive D: and a drive E: and a drive F:... I want a drive to hold all my movies.
At this rate I'll never have the room to rip my DVDs/blu-rays to disk. Even though I'm buying less and less.
|
|
|
|
|
I've had all week to get this done. The wife has been away since Monday and returns in a few hours and has just asked me if I had gotten it done...so now it's down to the wire...literally.
The task at hand...plugging up the lights on the artificial tree that I developed a hernia over last weekend, getting it down from the attic! I dread this since every year I wind up on the floor with a flashlight trying to find those color coded plugs...and then what to do with the plain ones...has the dot rubbed off?...why do I have space for 3 reds and only 2 red ends? Bah! 
"Go forth into the source" - Neal Morse
|
|
|
|
|
Sounds like you were inspired by: https://www.youtube.com/watch?v=9_vFAs3UGWw 
|
|
|
|
|
This is so bad it's good
Hipster Ipsum – Artisanal filler text for your project.[^]
And at the end:
Quote: Oh. You need a little dummy text for your mockup? How quaint.
I bet you’re still using Bootstrap too…
I just sprayed Avocado and Brussel Sprouts all over the screen.
cheers
Chris Maunder
modified 7-Dec-18 13:15pm.
|
|
|
|
|
I would like a platter of "La croix pickled hexagon". Thanks, Oh, make that two...love that hexagon.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
