|
Mentor = Teacher
Anagram of "no term"
cheers,
Super
------------------------------------------
Too much of good is bad,mix some evil in it
|
|
|
|
|
Yep you’re up tomorrow
We can’t stop here, this is bat country - Hunter S Thompson RIP
|
|
|
|
|
Times up! Over to you - do you want a sweetie for posting it? One of these[^] perhaps?
Sent from my Amstrad PC 1640
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
|
Read the article and you'll find out that the computer did not fire him. He wasn't even fired.
abc wrote: "This company was going through a transition, it had just been acquired. My previous manager had been laid off. He was supposed to transfer my name into the new system," Mr Diallo explains.
"I guess he only partially did the job and never renewed the end of my contract".
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
No, no, no … 
he was fired and hired because it was the only solution to make the system happy
(because a big red button was missing to stop the procedure, once started ..)
BR,
|
|
|
|
|
Read the article and was honestly expecting it to be something involving PeopleSoft. Have seen the systems set up so if you have not logged time in a certain number of weeks, you are automatically flagged as terminated. However, maternity leave, short-term disability/injury, and some FMLA cases would exceed than the time limit. It was always a headache when the person returned since they wouldn't be able to log in and get work done until HR went into the system and un-fired them.
I expect someone in HR didn't want to get a notification to review information before signing off on the termination so told their developers to make a new rule. Kind of surprised no one ever tried to use it as an excuse for some sort of lawsuit.
|
|
|
|
|
OK the person wasn't fired. How could they misinterpret that an email tells them "you've been terminated", they are denied access to their office and security guards escort them from the building. If the same happened to you you'd assume it was simply a computer error or a maybe an HR training exercise akin to a fire drill.
Peter Wasser
"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell
|
|
|
|
|
pwasser wrote: If the same happened to you you'd assume
No, I would verify.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
The guy did verify, the problem was that nobody could or would do anything about it because the computer was in control.
I've had a lot of experience with being on the receiving end of stuff like this (although not this one exactly). Verifying is great, but at the end of the day, what people say doesn't matter anywhere near as much as what the computers say.
|
|
|
|
|
patbob wrote: The guy did verify, the problem was that nobody could or would do anything about it because the computer was in control.
Someone is usually in control of "the computer".
patbob wrote: what people say doesn't matter anywhere near as much as what the computers say.
If you blindly are assuming all your data is correct, you deserve the consequences.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
Eddy Vluggen wrote: Someone is usually in control of "the computer".
Well, yeah. Technically. But the reality is a bit different. What if the only way to fix the problem in time is to manually "edit" the production database while its live? Even if you're willing to risk your job that way, is your boss willing to risk their's by letting you do it?
Eddy Vluggen wrote: If you blindly are assuming all your data is correct, you deserve the consequences
Sometimes, the problem is with who believes the database, and whether they're willing to take your word over the computer's. These days, computers are assumed to be correct until they change what they say. We all know that isn't the case, but that doesn't stop people from acting that way.
For example, what if one day your bank's computer said you had no money due to a computer glitch. Even if they could verify it was a computer glitch, do you think they'd give you any money until it was fixed and the computer once again said you had money?
|
|
|
|
|
patbob wrote: Well, yeah. Technically. But the reality is a bit different. What if the only way to fix the problem in time is to manually "edit" the production database while its live?
I'll laugh very hard at the incompetence, point out that I'm not liable for any errors in their database or the damages created thereby, and offer my services. At a nice hourly rate, of course.
patbob wrote: Even if you're willing to risk your job that way, is your boss willing to risk their's by letting you do it?
Depending on what boss, such things could be "normal procedure".
patbob wrote: Sometimes, the problem is with who believes the database, and whether they're willing to take your word over the computer's.
No, it is not. They're not required to believe me.
patbob wrote: For example, what if one day your bank's computer said you had no money due to a computer glitch. Even if they could verify it was a computer glitch, do you think they'd give you any money until it was fixed and the computer once again said you had money?
There is one bank in the Netherlands that sometimes has clients waking up to some "wrong" number on their account. It is not just a pointer to a number, but a total of transactions. As long as the transactions are recorded and validated, the resulting number will be correct.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
Hi all,
I'm planning to buy a sit/stand desktop... given I'm not comfortable with my current table set up (too high for my back, legs...[^]).
I know this is a little overkill, but doing that I'll get the right height for sure.
I've seen a lot of sites say the best one is the "Fully.com jarvis bamboo desktop". But then I've seen what looks a super professional review[^] that says this one is the most popular but not the best and propose some other candidates and says it moves a lot.
Living in Barcelona I can visit Haworth (where I'll be able to see the Herman Miller one which will cost half of my organs) and Steelcase, but I have not found more options to see the product so I have to rely on the Internet reviews to buy one... So I've decided to ask all you about your opinions...
I'm searching for a robust and stable desk. A slight movement can make my displays to move (given I have them on two articulated arms).
Also I'm interested in a low table starting at 65cm/25.5in.
The table top should be (80cm x 150cm)/(31.5in x 59in)
This said, have you worked with any height regulable desktop?
Do you feel it woobly? (Does it moves when you work?)
Which one would you recommend and why?
Thank you all, this is an expensive thing and I want to get some opinions that are not the ones from the Steelcase sales staff. 
|
|
|
|
|
6 months ago I bought one of these from IKEA based on a recommendation from a colleague (we work remotely)
I love it, and it definitely makes a difference to stand for parts of the day
Not cheap, but worth it in my opinion.
---Guy H  ---
|
|
|
|
|
I've seen the Bekant desktop at IKEA... They had it semi-dismounted... so I was not able to feel it well...
Does it shake or move while you type? Do you feel it strong?
In fact this is the cheapest one compared to the other ones I'm looking at... 
If you have time, could you tell me if you agree with the specific review btod make of this desk? see it here: IKEA Bekant Electric Sit To Stand Desk (Review / Rating / Pricing)[^]
Thank you!
|
|
|
|
|
Luckily I have had no issues with mine at all. I have seen reviews where people mention their bad experiences with the motor.
Regarding stability - no complaints here. If I type hard enough my monitor does wobble a little, but only when stood up and leaning on the edge of the desk.
The one in the review looks extremely small compared to mine...
My Desk
---Guy H ---
|
|
|
|
|
I'm sitting behind one of those since two years now and it's absolutely stable.
Well, it depends on yourself a bit of course, you're the one putting it together after all.
It does feel a little bit wobbly if I sit on it though. (Approx. 100 kg)
Personally I prefer those desks that curve around my belly, allowing me to use the desk itself as a support for my elbows.
|
|
|
|
|
Hi,
I've been searching for desk a year ago and found that Flexispot E5S/B/W (last letter denotes the frame color: silver, black or white) has very good reviews. You can find some customer's reviews on YouTube and you can check reviews at Amazon (there are number of reviews on German, UK and US shops).
Unfortunately, there was no delivery to Croatia, so I had to take a similar desk (frame only, without top desk) from another manufacturer on eBay (the model is not available anymore). Another option was Bekant table from Ikea, but I've read complaints that it can swing easily, it has no preset heights option and it is pricier than the one I've purchased. Stand I've purchased looks pretty similar to Flexispot, only controller is different.
I've been using the desk for over 6 months with two 24" monitors on it and I am very pleased with it. I am standing for the most of the time (approximately 75% of my working time) and change my position 2-3 times per day at most. Like most of height-adjustable desks, it can be raised from 63 cm to 125 cm (this doesn't include the top desk thickness), it has 3 customizable height preset options, customizable alarm option to remind you for position change after a period of time. Motor is quiet, when changing the height it starts/stops gradually, without a jerk.
Desk is pretty stable and solid. Of course, in upward position it will swing when you push it harder but it is really hard to overturn.
Anyway, I suggest you to check customer's reviews on Amazon (you can start with Flexispot, another choices will show up). You will find several models for around 400 € or less (without the top desk) that have positive reviews. Most of them have same features I described above.
Hope this helps,
Julijan
|
|
|
|
|
We use Varidesk[^] here at work. I don't personally use one, but people seem pleased with them and from what I can tell they're pretty stable. My boss has two 24" monitors on his and they haven't fallen off yet 
|
|
|
|
|
I use the Varidesk ProPlus48 with two 24 inch monitors. Well built, no problems, easy install. Hard to say how stable any stand-up desk would be if monitors on reticulating arms were attached. They are not made for such as far as I can tell and it seems it could throw off the balance of the total setup due to leverage of the arms with a heavy monitor. My unit is weighted at about 70-80 pounds, but still... I had a reticulating arm for one monitor and simply gave it up as it ergonomically didn't work well with the stand-up scheme. Never tried to attach it.
|
|
|
|
|
I have the Fully Jarvis Bamboo with 72 x 30 inch top. I have been using it for about a year and it's great. I have 32in monitor, phone, 2 laptops and few other things. The desk does not wobble but there is some vibrations from my hard typing which shakes my monitor a bit.
No other complains. I have also used a Varidesk for about 10 days but didn't fit my desk due to height of the desk. I had a the cubicle model and found the height between keyboard/mouse tray and monitor shelf was a bit tight.
Hope this helps.
|
|
|
|
|
|
Hi Joan,
I purchased an iMovr sit/stand desk and have been very happy with it. I needed one that was able to fit in a relatively small space, had programmable heights (up/down), and could withstand a dual monitor holder for 24 inch screens. Shop Standing Desks, Sit-Stand, Stand Up and Adjustable Workstations - iMovR[^]
I don't know whether they ship to Spain, but it's worth asking.
Good luck!
Laura
|
|
|
|
|
I purchased the business edition from Autonomous. This has great height range, along with dual motors to handle the weight smoothly. The price is great and I've been extremely pleased with the quality. Many versions are available on Amazon as well.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
