|
Don't use Convert as any error in the format of the input string will cause an exception.
Instead use int.Parse because you can check the result of the parse operation to see if you have entered a valid or invalid string.
From memory you should do the following
if (int.Parse(textBox1.Text, out int result))
{
}
else
{
}
|
|
|
|
|
You mean TryParse; Parse returns the parsed value or throws an exception. 
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I checked that twice and still missed that (Doh)
|
|
|
|
|
What value is in the textbox? If it can't be parsed as a short using the current culture settings, then Convert.ToInt16 will throw an exception.
You should use TryParse[^] rather than the Convert method to avoid the "can't parse this" exception:
if (int.TryParse(textBox1.Text, out int value))
{
if (value > 1000)
{
MessageBox.Show("Here!");
}
}
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Hmmm, I'm reading back a sensor, it's giving values all over the show!
private void button1_Click(object sender, EventArgs e)
{
if (int.TryParse(textBox1.Text, out int value))
{
if (value > 1000)
{
MessageBox.Show("Here!");
}
MessageBox.Show(value.ToString());
}
MessageBox.Show(value.ToString());
}
value is taken as 0, despite textBox1.Text having 1234.56...
|
|
|
|
|
glennPattonWork3 wrote: despite textBox1.Text having 1234.56...
But 1234.56 is a Float/Double not an Int; the two are quite different.
|
|
|
|
|
You are right, but even if make 1234 it still returns a 0...
|
|
|
|
|
Come on Glen, you need to show us the exact code, and the exact text that you are using.
|
|
|
|
|
Hi,
This is the code I have been trying to get all afternoon!
private void button1_Click(object sender, EventArgs e)
{
float ForceVal = 0;
<pre>
decimal.TryParse(weightTxt.Text, out decimal value);
if (value > 1000)
{
MessageBox.Show("Here!");
}
MessageBox.Show(value.ToString());
}
I think that should do it. I'm hacking together a test program that interfaces to a Phidget load cell in trying to measure a value that needs to converted to Newtons from Grams (I think!). I hate the fact I wasted so much time trying to get the value to be used out of a darned label. I haven't really done much Windows code (I'm an embedded guy really) since VS2008 was the new kid on the block and times like these it shows! 
|
|
|
|
|
Did the TryParse call succeed, return true?
"the debugger doesn't tell me anything because this code compiles just fine" - random QA comment
"Facebook is where you tell lies to your friends. Twitter is where you tell the truth to strangers." - chriselst
"I don't drink any more... then again, I don't drink any less." - Mike Mullikins uncle
|
|
|
|
|
Sort of I had to:
decimal.TryParse(weightTxt.Text, out decimal value);
as I was messing with a floating point number, haven't coded in Windows for a while, man it shows!
|
|
|
|
|
Maybe try decimal.TryParse()? as the input is not an int.
"the debugger doesn't tell me anything because this code compiles just fine" - random QA comment
"Facebook is where you tell lies to your friends. Twitter is where you tell the truth to strangers." - chriselst
"I don't drink any more... then again, I don't drink any less." - Mike Mullikins uncle
|
|
|
|
|
Thanks, that appears to work! 
|
|
|
|
|
 Good news!
"the debugger doesn't tell me anything because this code compiles just fine" - random QA comment
"Facebook is where you tell lies to your friends. Twitter is where you tell the truth to strangers." - chriselst
"I don't drink any more... then again, I don't drink any less." - Mike Mullikins uncle
|
|
|
|
|
I have tried to pass command line arguments to IrfanView to rotate a image, the code is below, the commented code works without a problem. The problem is the uncommented code, when the process is started, there are no errors but no changes are made to the image. I have tried the proper syntax code in VB.NET and it works as expected, any insight as to what's wrong?
//args = file1 + " " + "/rotate_r " + "/convert=" + file2 + "/killmesoftly";
//args = " " + file1 + " " + "/rotate_r " + "/jpgq=100" + "/convert=" + file2 + "/killmesoftly";
args = " " + file1 + " " + "/jpg_rotate=(3,1,0,1,0,0,0,0)" + "/killmesoftly";
|
|
|
|
|
I don't know why newbs always insist on breaking up what should be a single string into a bunch of string concatenations, making it harder to debug your code. You can do this all in one string:
args = $"{file1} /jpg_rotate=(3,1,0,1,0,0,0,0) /killmesoftly";
Take a closer look at your uncommented code:
args = " " + file1 + " " + "/jpg_rotate=(3,1,0,1,0,0,0,0)" + "/killmesoftly";
This will result in an arguments string that looks like this:
[file1]
Notice there is no space before the /killmosoftly switch. That will probably generate an error for the Irfan command.
modified 7-May-24 23:37pm.
|
|
|
|
|
Dave;
Thank you for responding, unfortunately the image was not rotated. As I stated previously the string works in Excel VBA & VB.NET with the correct file location syntax.
Thanks again for your help
|
|
|
|
|
I didn't say I knew anything about Irfan, only that your code is unnecessarily complicated, making it harder to debug.
|
|
|
|
|
Adding to Dave's wise words, your uncommented string doesn't specify an output file, so it may very well execute the process and discard the result.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
|
|
|
|
|
Peter;
Thank you for responding. There is no switch for an output file, because the original file is overwritten.
|
|
|
|
|
Hi everyone,
hard to phrase a title for what i am looking for, therefore following explanation.
I have the requirement to establish communication to a device via Secure WebSockets using TLS 1.3 and need to research on how i can do that from our applications that sadly are running with .NET Framework 4.0.
What i found out yet is that it might be a pain to get Secure WebSockets with TLS 1.3 running with that old framework and therefore i need to find a proper solution on how to circumnavigate this issue.
My Idea:
The old application will talk with a service / server specifically designed to just do the communication part, meaning the old stuff doesn't get touched and the service can run with .NET 8, which obviously should support the requirement.
What my questions are:
Does anyone have an idea or can point me into the right direction in terms of:
- How do they both communicate with each other (I would prefer not to use any COM stuff if possible)
- What type of project to use for the .NET 8 app?
--> I heard of the "Worker services in .NET" which seems the right thing to me, since the "service" needs to be run on demand (Only if required to be used), should support multiple connections and should not show stuff on a console while running.
Since the idea is to have a "secure" connection it would be strange if all the info can be read via COM communication. On the other hand that's a fairly new area for me, so i have no clue if that is just the way to go and does work "secure" as well. My head just says COM sounds old and may be wrong, but don't hate me for that 
Additionally:
Regarding installation or installation of a "Service" there won't be much of issue afaik, in the end the user simply doesn't care, shouldn't know or bother how the magic works behind the UI.
Many thanks in advance!
Rules for the FOSW ![ ^]
MessageBox.Show(!string.IsNullOrWhiteSpace(_signature)
? $"This is my signature:{Environment.NewLine}{_signature}": "404-Signature not found");
|
|
|
|
|
HobbyProggy wrote: TLS 1.3 running
C# doesn't do TLS unless both the libraries and OS have the correct versions. Following has the magic of SecurityProtocolType.Tls12 and comment mentions the version of .Net needed.
https://stackoverflow.com/questions/55240173/how-to-handle-httpwebrequest-c-sharp-with-tls-1-3[^]
For OS following claims Windows server 2022 is needed. Although I thought there was a prior version where it could be turned on.
TLS1.3 is it supported? - Microsoft Q&A[^]
There are also encryption protocols that must be enabled or disabled.
Now all of the above is to make it easy. Question might be if someone could add a native library of some sort (not C#) and implement it from scratch. After all linux presumably has it and that means the code should exist. But I have not researched that myself.
|
|
|
|
|
Good point, i'll have to check back with the hardware team then, cause they implement TLS 1.3 on the device and exepct us to connect to it via Secure Websockets and TLS 1.3.
Rules for the FOSW ![ ^]
MessageBox.Show(!string.IsNullOrWhiteSpace(_signature)
? $"This is my signature:{Environment.NewLine}{_signature}": "404-Signature not found");
|
|
|
|
|
|
Thanks for the Link Richard, sometimes my google foo seems off...
Uhm, long story short: There is a bunch of old men that define a standard i have to align to and use their libraries and software and put my stuff somewhere in-between. This application is running on 4.0.3 and that is why i am targeting that. The app loads my code and then i load the base stuff as well and all of that is compiled as 2.0 Standard.
Therefore my thought of extracting this TLS / Websocket bit into a "Service / Server" my old fart code can communicate with. And i already found out that Pipes do work like a charm there.
Rules for the FOSW ![ ^]
MessageBox.Show(!string.IsNullOrWhiteSpace(_signature)
? $"This is my signature:{Environment.NewLine}{_signature}": "404-Signature not found");
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
