|
Hi everyone!
I have a html page with an IFrame; and the following code:
var doc = document.getElementById("iframe_id").contentDocument;
doc.body.innerHTML = htmlCode;
This code is run in body's onload handler. 'htmlCode' contains some (very simple) html (it is a string, of course).
I was able to test this code only in Safari 1.3 (Mac), and it didn't work 
BUT: I need to test it in a Safari 2.0.4. Unfortunatelly, I don't have access to it. Anyone (with Mac) can tell me if it will work?
And why the above code didn't work with Safari 1.3? Is it possible to fix it?
Thank you very much in advance!
P.S. I understand it is a MS-centric forum, but... I do hope.
-------------------------
Listen up! "Teamwork" means staying out of my way! (Seifer, Final Fantasy 8).
|
|
|
|
|
You might have better luck with writing the entire page into the iframe. Example:
var doc = document.getElementById("iframe_id").contentDocument;
doc.open();
doc.write('<html><head><title></title></head><body>'+htmlCode+'</body></html>');
doc.close();
---
single minded; short sighted; long gone;
|
|
|
|
|
Ok, this variant does work  But what to do with the original code? Does it work in the Safari 2?...
Thanks anyway.
-------------------------
Listen up! "Teamwork" means staying out of my way! (Seifer, Final Fantasy 8).
|
|
|
|
|
Dmitry Khudorozhkov wrote: But what to do with the original code? Does it work in the Safari 2?...
I don't know. I don't have a mac.
---
single minded; short sighted; long gone;
|
|
|
|
|
Dmitry Khudorozhkov wrote: But what to do with the original code? Does it work in the Safari 2?...
That code does work on Safari for Windows, although it's a little bit different in size and exact location.
Eriawan
|
|
|
|
|
I wrote a Windows Forms application in Visual Basic 2005.
What would be involved in converting it to run as an internet web application?
|
|
|
|
|
A full rewrite.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
This Visual Basic 2005 app is basically a wizard that starts out with a background image. Then the user selects a number of images to overlay it producing a final image that is saved for later retrieval, and can be printed or emailed.
The 'other' images are .png files with transparent backgrounds.
Can the vb.net code be installed on the web server and executed from a browser as an internet app or does it have to be rewritten and, if so, in what language?
|
|
|
|
|
It depends how you've written the code, but it may well need totally re-written, at least the front end will.
You'll be going from a nice state-ful environment to a totally stateless one. Sounds like you might also need some fun javascript for interacting with your overlays.
|
|
|
|
|
|
 hai
i am an asp programmer.
i have two combo boxes optone and opttwo.
i have loaded values for optone from database
selected
<%
sqlPRO = "Select field1 From tablename"
set rs= conn.Execute(sqlPRO)
i=1
do while Not rs.EOF
%>
<%=rs("field1")%>
<%
i=i+1
rs.MoveNext
loop
rs.Close
%>
now i want to load a value for the second combobox opttwo
it's dependant on the first combobox optone
function setOptions(chosen)
{
var selbox = document.frm.opttwo;
selbox.options.length = 0;
selbox.options[selbox.options.length] = new Option('Select','oneone');
<%
strSQLQry = "Select field1 From tablename where ID='" & chosen & "'"
rs.Open strSQLQry, conn
rs.MoveFirst
While Not rs.EOF
%>
valFromList = "<%=rs("field1")%>";
selbox.options[selbox.options.length] = new Option(valFromList,'oneone');
<%
rs.MoveNext
Wend
rs.Close
%>
}
this code shows an error.i can't get the javascript variable into asp.
if anyone known please help me
Ganesh Mohan
|
|
|
|
|
The javascript variable is in memory in the Browser Instance. The ASP variable is in memory in the Web Server instance. Two different processes.
Values in the Browser are transfered to the Server by sending a POST or GET request to the Server. Values in the Server are sent to the Browser in the Response Stream of the request.
|
|
|
|
|
Don't cross post.
I answered this in the ASP.NET forum.
---
single minded; short sighted; long gone;
|
|
|
|
|
Actually when i run my application in firefox and in Internet Explorer my pages are not appeared similar. So I want to know how to auto adjust the pages so that they appeared similar in any browser.
|
|
|
|
|
You basically have to play with your CSS until you find styles that render the same in both.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
There are some tags which are supported by IE but not by FireFoz and vise versa.
Sometimes you need to use HTML tags according to browser type. Browser compatibility may prove to be a very big issue if you dont pay attention from scratch.
So just keep your design simple and follow basic HTML rules and test your design on other browsers like Opera and Safari while developing your site.
Best Of Luck
“The woods are lovely, dark and deep. But I have promises to keep, and miles to go before I sleep.”
|
|
|
|
|
i am have developed a project on jsp and end user script is javascript.
then i have uploaded the same in my intranet site.
It woked for IE, netscape and firefox.
But it did not show up in the safari browser of the mac.
how do i go about solving the issue
is that becoz of the compatibility?
|
|
|
|
|
Yes, it may be a compatibility issue. For some JS events, Safari behaves differently than IE and Mozilla.
Like in IE and Firefox, onFocus event is treated same as OnClick event. But safari donot.
Sometimes onBlur also creates some problems in Safari.
You have to debug your script to find the code which is not working as expected.
Best Of Luck
“The woods are lovely, dark and deep. But I have promises to keep, and miles to go before I sleep.”
|
|
|
|
|
Hi,
I have encountered problem when saving string value with double quote in it. When I attempt to save it into the mssql database an error message will display.
Example:
Textbox1.text content is - Round Bar 1/2" dia.
Dim sItemID = "00001"
Dim sDescription = Textbox1.text
Dim ItemCmd = New SQLCommand("Insert into Item " _
& "(" _
& "ItemID, " _
& "Description " _
& ")" _
& "Values " _
& "(" _
& "'" & sItemID & "'," _
& "'" & sDescription & "'" _
& ")"
During saving the error will occur:
String or binary data would be truncated.
The statement has been terminated.
The error will be fixed if I add the "SET ANSI_WARNINGS OFF" in my sql statement, but this is not the ultimate solution because the double apostrophe or quotation will be removed by the system itself when saving.
And, if I removed the "SET ANSI_WARNINGS OFF" this error will display:
Unlclosed quotation mark
Is there a way to resolve it?
I have been solving this for two days already and no luck yet.
Thanks Guys
hifiger2004
|
|
|
|
|
A quotation mark (") is not a problem in an SQL string. Are you sure that it's not two apostrophes (')?
You have to escape apostrophes in string values by doubling them if you put the values directly in the SQL query. It's better to use parameters instead of putting the values directly in the query.
---
single minded; short sighted; long gone;
|
|
|
|
|
You're right guffa, I changed my way of coding instead of putting it directly in the query, I used the sqlparameter approach and it works fine now.
Thank you
hifiger2004
|
|
|
|
|
Try putting the following text into your textbox1 and then think about parameterising this query:
'); delete from item; --
|
|
|
|
|
Hi,
i'm currently working in a .net web project.
i want to display the date in server side date format.
i'm getting the server side date as a string from a hidden control.
i want to convert that date string into javascript date object to get the date, month, and year.
var scheduleDate = new Date(hdnDate.value);
The above line of javascript code is working well for 'yyyy/MM/dd' date format;
That is returning 'NaN' for 'yyyy-MM-dd' and 'yyyy.MM.dd' date formats.
Can anybody help me in this.
Thanks in advance.
Regards,
Alagumani Boju.
|
|
|
|
|
If you represent the date as the number of millisenconds since 1970-01-01, you can safely create a Date object from that.
You can use (DateTime.Today - new DateTime(1970,1,1)).TotalMilliseconds to get the current date in milliseconds since 1970-01-01.
---
single minded; short sighted; long gone;
|
|
|
|
|
Guffa's solution is the best. You should use it.
But, if for some reason you must have the dates in yyy-MM-dd format, just do new Date(hdnDate.value.replace(/-/g, '/')). This uses a regex to match all - chars and then replaces them with the forward slash.
But yeah. If you control the format, please go with Guffa's solution. You'll have far fewer headaches.
every night, i kneel at the foot of my bed and thank the Great Overseeing Politicians for protecting my freedoms by reducing their number, as if they were deer in a state park. -- C hris L osinger, Online Poker Players?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
