|
Check out the documentation for IConnectionPointImpl and IConnectionPointContainerImpl.
Your component needs to implement IConnectionPoint, and the Advise method will typically store the provided sink in some container (like an array, or a map, or a list...)
When something happens in the component that triggers an event (such as changing a property, or a timer firing, or...) the component iterates through all the entries in that container, and calls the appropriate method(s) passing any parameters as required.
Steve S
Developer for hire
|
|
|
|
|
there is an m_vec member which contains a list of clients which the sinked the event.
Sudeesh
|
|
|
|
|
Dear Gurus,
You may not be aware that I have lost my job as our company has given us lay off.
I am really expecting a job in MFC, VC++.
I have given 2-3 technical interviews but it has made clear that interviews need special attention and preparation ,
I would be highly thankful , if someone provides me the compilation of interview questions on VC++, MFC, C++, ATL COM, Threading. If with answers then it will be a faster preparation for me. (Sorry being lazy here, but situation is a bit tedious with me right now).
ANy links also will help a lot.
If you want to send me few things, then email address is
rpathak03011978@yahoo.com
Looking forward some help from Codeproject.
Thanks ,
pathak
|
|
|
|
|
template<class TYPE, class ARG_TYPE>
class CBanana : public CObject
{
protected:
struct CApple
{
int x;
int y;
};
int GetInt(int);
CApple* GetApple(CApple*);
};
template<class TYPE, class ARG_TYPE>
int CBanana<TYPE, ARG_TYPE>::GetInt(int i)
{
return i;
}
template<class TYPE, class ARG_TYPE>
CBanana<TYPE, ARG_TYPE>::CApple*
CBanana<TYPE, ARG_TYPE>::GetApple(CBanana::CApple* pApple)
{
return pApple;
}
|
|
|
|
|
You don't use the template parameters anywhere....What's the point of using templates? There are times when this is done intentionally but this doesn’t like any case I’ve seen.
Steve
|
|
|
|
|
I was trying to illustrate the compile error as simply as possible. This is not the actual code.
|
|
|
|
|
Try this:
template<typename TYPE, typename ARG_TYPE>
typename CBanana<TYPE, ARG_TYPE>::CApple*
CBanana<TYPE, ARG_TYPE>::GetApple(typename CBananaa<TYPE, ARG_TYPE>::CApple* pApple)
{
return pApple;
}</code>
I believe you need the underlinded typenames in standard C++ but some non-standard complient compilers may not like them.
Steve
|
|
|
|
|
That works thanks. I'm still a bit concerned that this will come back
and bite me. The typename is used to resolve ambiguity but I don't see
any ambiguity and afxtempl.h manages without it. Is there something
more fundamentally wrong ?
Nvat.
|
|
|
|
|
You need to add the extra typename when you refer to a nested type of a class that is dependant on a template parameter in a template. It tells the compiler it's a type and in this case to interpret the "*" as a pointer not multiplication.
e.g.
template<typename TYPE, typename ARG_TYPE>
typename CBanana<TYPE, ARG_TYPE>::CApple*
\-----------\/------------/ \-\/-/
2. Is nested in this class 1. This nested type
which is dependant on the
template parameters 'TYPE'
and 'ARG_TYPE'.
CBanana<TYPE, ARG_TYPE>::GetApple(typename CBananaa<TYPE, ARG_TYPE>::CApple* pApple)
{
return pApple;
}
The same goes for the other use of typename. The reason you need to do this is quite involved but actually quite reasonable once you understand it.
Steve
|
|
|
|
|
typename and class are interchangible when dealing with templates. That is, in that case, they mean the exact same thing.
Hmm, hit pre and it posted it. Anyway, the following should work (don't have Visual Studio on this box, so I can't test it to be sure):
template<class TYPE, class ARG_TYPE>
class CBanana : public CObject
{
protected:
struct CApple
{
int x;
int y;
};
int GetInt(int);
CApple* GetApple(CApple*);
};
template<class TYPE, class ARG_TYPE>
int CBanana<TYPE, ARG_TYPE>::GetInt(int i)
{
return i;
}
template<class TYPE, class ARG_TYPE>
CBanana<TYPE, ARG_TYPE>::CApple*
CBanana<TYPE, ARG_TYPE>::GetApple(CBanana<TYPE, ARG_TYPE>::CApple* pApple)
{
return pApple;
}
You shouldn't need the typename specifier in the method signature (though, it won't necessarily hurt it, it can make the code a bit less readable).
-- modified at 12:12 Tuesday 25th July, 2006
|
|
|
|
|
Zac Howland wrote: You shouldn't need the typename specifier in the method signature
This is not the case. As I explained in a previous post you need to add a typename in a template if you refer to a type which is nested in another type which is dependant on a template parameter. In this context you can NOT use class. See here[^] for Microsoft's explaination.
|
|
|
|
|
I stand corrected. After looking at a few of the documents, I think I never ran into this issue because I almost always typedef in those situations.
If you decide to become a software engineer, you are signing up to have a 1/2" piece of silicon tell you exactly how stupid you really are for 8 hours a day, 5 days a week
Zac
|
|
|
|
|
No that didn't work either, but I'm sure a bright bunch like yourselves
can fill in the missing angle brackets and formatting.
Sorry,
Nvat.
|
|
|
|
|
instead of reposting again and again... edit (use the [Modify] link at the bottom of your thread) and check the "Ignore HTML tags in this message (good for code snippets)" checkbox below the emoticons...
|
|
|
|
|
My previous copy / paste from Visual Studio didn't
work properly. Should have been :
template<class type,="" class="" arg_type="">
class CBanana : public CObject
{
protected:
struct CApple
{
int x;
int y;
};
int GetInt(int);
CApple* GetApple(CApple*);
};
template<class type,="" class="" arg_type="">
int CBanana<type, arg_type="">::GetInt(int i)
{
return i;
}
template<class type,="" class="" arg_type="">
CBanana<type, arg_type="">::CApple*
CBanana<type, arg_type="">::GetApple(CBanana::CApple* pApple)
{
return pApple;
}
Nvat
|
|
|
|
|
use check box 'ignore HTML Tags..." (present below) while posting code. modify your post by checking the option. That will make full code available for reading
|
|
|
|
|
Hi,
when I try to compile the following code
template<class type,="" class="" arg_type="">
class CBanana : public CObject
{
protected:
struct CApple
{
int x;
int y;
};
int GetInt(int);
CApple* GetApple(CApple*);
};
template<class type,="" class="" arg_type="">
int CBanana<type, arg_type="">::GetInt(int i)
{
return i;
}
template<class type,="" class="" arg_type="">
CBanana<type, arg_type="">::CApple*
CBanana<type, arg_type="">::GetApple(CBanana::CApple* pApple)
{
return pApple;
}
which is based on code found in the MFC afxtempl header, I get a compile
error on the line CBanana<type, arg_type="">::CApple*
syntax error : missing ';' before '*'
if I replace the above return type with an int it then complains
instead about the parameter CBanana::CApple* pApple
'pApple' : undeclared identifier
it doesn't like my CApple !
Any ideas why ?
Nvat.
|
|
|
|
|
What is ATL, WTL, STL? When these are needed? where can i use them
Mathumala
|
|
|
|
|
|
toxcct wrote: see, it's not that complicated to use the web to search for something... i'm pretty sure you could do tit by yourself
But, Google is so complicated to use ..... :-P
If you decide to become a software engineer, you are signing up to have a 1/2" piece of silicon tell you exactly how stupid you really are for 8 hours a day, 5 days a week
Zac
|
|
|
|
|
Hi All,
Im writing a dll in ATL COM called by a vb.net client. the client passes a 2d integer array when it calls MyMethod.
i have tow problems
I. i have trouble accessing the values in the array passed, i get junk values. this is the code.
<br />
STDMETHODIMP ExposedATLClass::MyMethod(SAFEARRAY **psa)<br />
{<br />
AFX_MANAGE_STATE(AfxGetStaticModuleState())<br />
long arrlengthx,arrlengthy;<br />
long **myarray;<br />
int indexx,indexy;<br />
try<br />
{<br />
arrlengthx=(*psa)->rgsabound[0].cElements;<br />
arrlengthy=(*psa)->rgsabound[1].cElements;<br />
myarray=(long**)malloc(arrlengthx*sizeof(long**)); <br />
for(long tempvar=0;tempvar<=arrlengthx;tempvar++)<br />
{<br />
myarray[tempvar]=(long*)malloc(arrlengthy*sizeof(long*));<br />
}<br />
SafeArrayAccessData(*psa,(void**)myarray);
char details[100];<br />
for(int tempx=0; tempx<=arrlengthx; tempx++, indexx++, indexy=0)<br />
{<br />
for(double tempy=0; tempy<=arrlengthy; tempy++, indexy++)<br />
{<br />
sprintf(details,"%d %d %d",indexx,indexy,myarray[indexx][indexy]);<br />
this->Error_Logger(details);
}<br />
}<br />
}<br />
catch(CException ex)<br />
{<br />
char error[300];<br />
ex.GetErrorMessage(error,300);<br />
this->Error_Logger(error);<br />
ex.Delete();<br />
}<br />
return S_OK;<br />
}<br />
in the program
SafeArrayAccessData(*psa,(void**)myarray); returns success
other methods i've used to access data are (replace the line "SafeArrayAccessData(*psa,(void**)myarray);" with code below )
1. using SafeArrayGetElement
<br />
long ai[2]={0,0}<br />
for(int temx=0;temx<=arrlengthx;temx++,ai[0]++)<br />
{<br />
for(int temy=0;temy<=arrlengthy;temy++,ai[1]++)<br />
{<br />
SafeArrayGetElement(*psa,ai,&myarray[temx][temy]);<br />
}<br />
}<br />
here SafeArrayGetElement(*psa,ai,&myarray[temx][temy]); returns index out of bounds
2. using safearraylock/unlock
<br />
<br />
both lock and unlock returned success
all methods return this junk value for myarray[indexx][indexy] -842150451
the values of indexx and indexy are correct and so are the boundaries.
II. my other problem.. no exception is logged.
where am i wrong. pls help
Thanks in advance
Nikhil
|
|
|
|
|
I have add teh active-x control in my project:
Open the Project in which intend to use an ActiveX control.
Project | Add To Project | Components and Controls. Taken to the Gallery where choose from Registered ActiveX Controls. Click the Control from the list and click Insert. choose the Control from a list and to confirm the names of the wrapper files which will be created.
From there i got a active=x in dialog box and the wrapper class also.
Now i need to know I have to login to server to take data from that and store in my system.
1: should i need to include ATL controls in my project?
2. how to make use of wrapper class and active-x controls?so thst i can login to server
3. Function in my .cpp file are as follow(API function).
CString CArielAPI::GetServerAddress(LPCTSTR SessionId)
{
CString result;
static BYTE parms[] =VTS_BSTR;
InvokeHelper(0x15, DISPATCH_METHOD, VT_BSTR, (void*)&result, parms, SessionId);
return result;
}
String CArielAPI::Login(LPCTSTR UserName, LPCTSTR Password, LPCTSTR UserId)
{
//username = wwtest2;
//Password = RD9234;
//Userid = wwtest2;
CString result;
static BYTE parms[] =VTS_BSTR VTS_BSTR VTS_BSTR;
InvokeHelper(0x2, DISPATCH_METHOD, VT_BSTR, (void*)&result, parms,UserName, Password, UserId);
return result;
}
4: IfATL is needed then how to work with that any help.....?????
|
|
|
|
|
1. No, you're using MFC wrappers.
2. You need to make sure that you create an instance of an 'CArielAPI' object.
Once you've done that, you should be able to call the various methods as you need to. Is there a 'Create' function (or similar name) generated in that class?
3. Refer to the documentation for the control 
4. See #1
Steve S
Developer for hire
|
|
|
|
|
i have this function.But i am in great confusion whre should i create object ex:arielapi wartzodlcom.dbaccess.
CString CArielAPI::CreateOrder(LPCTSTR SessionId, long MarketNo, LPCTSTR Amount, short BuySell, short StopLimit, LPCTSTR RequestedPrice, short TradeType, LPCTSTR Exchange, short GoodTil, LPCTSTR GoodTilTime, LPCTSTR Instructions, LPCTSTR Account, LPCTSTR ClientRef)
{
CString result;
static BYTE parms[] =
VTS_BSTR VTS_I4 VTS_BSTR VTS_I2 VTS_I2 VTS_BSTR VTS_I2 VTS_BSTR VTS_I2 VTS_BSTR VTS_BSTR VTS_BSTR VTS_BSTR;
InvokeHelper(0x7, DISPATCH_METHOD, VT_BSTR, (void*)&result, parms,
SessionId, MarketNo, Amount, BuySell, StopLimit, RequestedPrice, TradeType, Exchange, GoodTil, GoodTilTime, Instructions, Account, ClientRef);
return result;
}
|
|
|
|
|
Ah, no. That won't create an object, that calls a method on the object.
I'd do some background reading on using ActiveX controls in MFC if I were you. If you have VC6, the 'How do I..' in the help isn't too bad.
Steve S
Developer for hire
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
