Re: What is the Mystery behind Release Folder ? - C / C++ / MFC Discussion Boards

Muhammad Irfan Azam4-Mar-05 1:04

4-Mar-05 1:04

Hi All,
I want to send a digitally signed email that should contain the digital certificate that could be shown by the email client.
I have the S/MIME compatible message but i am unable to send that message as a digitally signed message through MAPI. If any one knows about the libraries, APIs which i can use to send a digitally signed email through MAPI, then please share ur knowledge with me.
Regards,

Common Man

globally scoped array of objects?

baxybaxy4-Mar-05 0:51

baxybaxy

4-Mar-05 0:51

hi everyone. i'm hoping there's a genius out there who can help me with this

bit of a beginner here with C++. I'm using .net 2.0 / VS 2005 Beta (for my sins!)

i have a rather basic problem, which i cannot seem to resolve.

i have a managed class "city" (definitions below)

i have a function to load an external XML file (selected by the user), which creates a managed array City, as follows (the int "numberofcities" is also read from the file)

array<city^>^City = gcnew array<city^>(numberofcities);

each object City[0], City[1], City[2] etc is then created as I loop through the XML city file, using

City[rowcount] = gcnew city(...,...,.... )

obviously, i don't know the size of the array or the contents until the file is selected by the user and the XML is processed.

All well and good so far. I can play with the array within the file loading function and I'm happy. But then the City array of objects is of local scope to the function loading the XML, and I want to be able to access this array elsewhere in the program

for example, i have a function where i draw the cities on a map, and want to use something like:
double longitude = City[1]->lng;
double latitude = City[2]->lat;
and so on.

so after the long winded introduction: my question is -- how can i make City available to other functions outside of the scope where it was loaded?

i have had a few people make suggestions, but no-one has come up with something workable so far.

i heard about:
1. using native arrays rather than .net arrays -- but then i can't include system::strings in the class
2. defining a "wrapper class" - have only found references to this regarding .COM objects ? i confess, i don't know where to start.
3. using a singleton object and instances (?) : again, no clue
4. using a pin pointer; (but the pin pointer is only a local scope variable also?) and anyway i don't know if it works
5. passes the array from function to function. i'm not sure i can make that work either. also, there is more than one array loaded alongside City.
6. don't use arrays of objects, use XML connection directly in each function. could work, but i would lose all the benefits of being able to manipulate objects (for example, i will have a method for city to allocate all the demand from city 1 to city 2)

i would really appreciate someone giving either a detailed idea of how to address this... or at the least maybe giving some sort of indication of which if any of the above suggestions is worth me looking in to in more depth

thanks everyone!

//////////////////

public ref class city
{
public: int cityID;
String ^cityName;
String ^ countryID;
String ^ countryName;
double lng, lat;
double dailydemand;
double annualdemand;

//constructor

public: city() {
dailydemand = 0;
annualdemand = 0;
}

public: city(int cID,String ^ cName,String ^ coID,String ^ coName,double ln,double la)
{
cityID=cID;
cityName=cName;
countryID=coID;
countryName=coName;
lng=ln;
lat=la;
}
};

Re: globally scoped array of objects?

Steen Krogsgaard4-Mar-05 4:14

Steen Krogsgaard

4-Mar-05 4:14

I'd go for possiblity no 3 by making City a global variable. I have never used VC7.0 or managed code/arrays, but in my VC6.0 I would put the declaration in a common header:

<br />
extern array^ City;<br />

and in one (and only one) cpp put

<br />
array^ City = NULL<br />

and in your XML read function:

<br />
City = gcnew array(numberofcities)<br />

In this way City is visible all over your program

Cheers
Steen.

"To claim that computer games influence children is ridiculous. If Pacman had influenced children born in the 80'ies we would see a lot of youngsters running around in dark rooms eating pills while listening to monotonous music"

Re: globally scoped array of objects?

Chris Meech4-Mar-05 5:42

Chris Meech

4-Mar-05 5:42

Steen Krogsgaard wrote:
In this way City is visible all over your program

And ....

You will have no way of knowing whether City points to the first entry of your array, the last entry or any of the ones in between. Smile | :)

While I avoid them as much as possible when I do use a global pointer, I will assign and allocate, or initialise to a const variable so that nothing can modify the value.

const  array*  City    =  new array(numberofcities);

Chris Meech

I am Canadian. [heard in a local bar]

Gently arching his fishing rod back he moves the tip forward in a gentle arch releasing the line.... kersplunk [Doug Goulden]

Nice sig! [Tim Deveaux on Matt Newman's sig with a quote from me]

Re: globally scoped array of objects?

Steen Krogsgaard6-Mar-05 21:05

Steen Krogsgaard

6-Mar-05 21:05

Right. I would use a container instead of a raw array. But then again, you do know that City points to the first item as that is the address returned by new. I suppose that you mean that the pointer can be modified inadvertently (or even on purpose) in the program since it's not const - but hey, this is not VB, you're supposed to know what you do with your pointers! Poke tongue | ;-P

Unfortunately I don't think using a const pointer will work in this instance as the size of the array is not known at declaration/definition time but only after the XML file is read (numberofcities is read from the XML file according to the OP).

Cheers
Steen.

"To claim that computer games influence children is ridiculous. If Pacman had influenced children born in the 80'ies we would see a lot of youngsters running around in dark rooms eating pills while listening to monotonous music"

What is the Mystery behind Release Folder ?

zahid_ash4-Mar-05 0:36

zahid_ash

4-Mar-05 0:36

HI , I have posted my Question yesterday that when i Add A New Member Variable in my one Header File , on Build it show no error . on Execution my program crash down.

Today i found the soulution that .. I deleted the Release Folder then i build and Execute the program , then it works fine .

What is the Mystery Behind the Release Folder

thanx

Regards.

Re: What is the Mystery behind Release Folder ?

jan larsen4-Mar-05 1:42

jan larsen

4-Mar-05 1:42

There are some pre-build objects in that folder if you've compiled your project before. When you hit 'build', VC will try to reduce compile time by using object files that aren't changed. The problem is that VC sometimes fails in determining what's changed.
I think you could have chosen 'Rebuild' with a similar successfull result.

"After all it's just text at the end of the day. - Colin Davies

"For example, when a VB programmer comes to my house, they may say 'does your pool need cleaning, sir ?' " - Christian Graus

Re: What is the Mystery behind Release Folder ?

aritosteles5-Mar-05 13:53

aritosteles

5-Mar-05 13:53

Probably "Rebuild all" would have worked too. But there's more. Once I had to delete a few compiler-generated files from the project's main folder. I think it was a .aps file, a .ncb file or even the classwizard .clw file. VC gets buggy from time to time, so if you are desperate, just try anything, delete every file that's not code and see what happens.

Regards,
Aritosteles

"No fancy signature"

text setting in list control

deldeep3-Mar-05 23:39

deldeep

3-Mar-05 23:39

I m trying to bold a particuler row in listcontol .......but unable to do show......anybody can give any suggestion ........so that i can apply ur
thoughts......

thanx forum......DEEP.

Re: text setting in list control

David Crow4-Mar-05 2:59

David Crow

4-Mar-05 2:59

This class can accomodate your needs.

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

Re: text setting in list control

deldeep4-Mar-05 20:45

deldeep

4-Mar-05 20:45

thanx ........sir....but is it possible without using CXListCtrl?

thanx forum......DEEP.

Re: text setting in list control

David Crow7-Mar-05 3:20

David Crow

7-Mar-05 3:20

Of course, but whether you write your own class or use someone else's, the net result is the same. You can always dissect the CXListCtrl class to see how "bold" is implemented.

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

Re: text setting in list control

deldeep7-Mar-05 17:39

deldeep

7-Mar-05 17:39

Thanx sir....

keep smilling.....b'coz smile is the shortest distance between people....

CREATE PROCESS

sunit53-Mar-05 22:59

sunit5

3-Mar-05 22:59

i downloaded a file using openurl() in the form exe file.and executed using SHELLEXECUTE.BUT I WANT TO HIDE THE SET-UP .I TRIED THE CREATE PROCESS.BUT USING THE LATTER GIVES ME ERROR.

Re: CREATE PROCESS

Jetli Jerry4-Mar-05 0:46

Jetli Jerry

4-Mar-05 0:46

In ShellExecute, make nShowCmd = SW_HIDE.....

Use CreateProcess like this

STARTUPINFO si;
PROCESS_INFORMATION pi;

ZeroMemory( &si, sizeof(si) );
si.cb = sizeof(si);
ZeroMemory( &pi, sizeof(pi) );

// Start the child process.
if( !CreateProcess( NULL, // No module name (use command line).
"MyChildProcess", // Command line.
NULL, // Process handle not inheritable.
NULL, // Thread handle not inheritable.
FALSE, // Set handle inheritance to FALSE.
0, // No creation flags.
NULL, // Use parent's environment block.
NULL, // Use parent's starting directory.
&si, // Pointer to STARTUPINFO structure.
&pi ) // Pointer to PROCESS_INFORMATION structure.
)

hope this helps

Jetli
Constant Thing In World Is Change.

Re: CREATE PROCESS

sunit54-Mar-05 2:13

sunit5

4-Mar-05 2:13

THANKS IT HELPED ME.BUT still i have Queery.i have dwnloaded an Win-Zip file in exe form then i executed the the file using

CREATE PROCESS (ALSO TRIED SHELL EXECUTE nShowCmd = SW_HIDE)
BUT THE SET UP OF WINZIP IS NOT HIDDEN.IS THERE ANYWAY TO HIDE THIS SETUP

Re: CREATE PROCESS

sunit54-Mar-05 2:15

sunit5

4-Mar-05 2:15

THANKS IT HELPED ME.BUT still i have Queery.i have downloaded a Win-Zip file in exe form then i executed the the file using

CREATE PROCESS (ALSO TRIED SHELL EXECUTE nShowCmd = SW_HIDE)
BUT THE SET UP OF WINZIP IS NOT HIDDEN.IS THERE ANYWAY TO HIDE THIS SETUP

Re: CREATE PROCESS

David Crow4-Mar-05 3:05

David Crow

4-Mar-05 3:05

sunit5 wrote:
BUT THE SET UP OF WINZIP IS NOT HIDDEN.IS THERE ANYWAY TO HIDE THIS SETUP

By default, I do not think that WinZip can be ran without some sort of user interaction. You can, however, download the command-line add-on from here. That would allow you to use WinZip in an automated fashion.

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

Set background colour on a CDateTimeCtrl

roccap3-Mar-05 22:46

roccap

3-Mar-05 22:46

I'm trying to set the background color and text colour on a CDateTimeCtrl, when its in its non dropped down state. I thought I could treat it like a std window and derived a
class from CDateTimeCtrl and then overode the OnCtlColor function and set the text/background colour in there, but it doesn't seem to work.
Am I doing something wrong or this not the way to do it for such a control?

TIA

paul

Re: Set background colour on a CDateTimeCtrl

namaskaaram4-Mar-05 1:23

namaskaaram

4-Mar-05 1:23

u already have an example in the msdn documentation,just incase u didnt get em,here it iz.....

// This OnCtlColor handler will change the color of a static control
// with the ID of IDC_MYSTATIC. The code assumes that the CMyDialog
// class has an initialized and created CBrush member named m_brush.
// The control will be painted with red text and a background
// color of m_brush.

HBRUSH CZilchDlg::OnCtlColor(CDC* pDC, CWnd* pWnd, UINT nCtlColor) 
{
   // Call the base class implementation first! Otherwise, it may
   // undo what we're trying to accomplish here.
   HBRUSH hbr = CDialog::OnCtlColor(pDC, pWnd, nCtlColor);

   // Are we painting the IDC_MYSTATIC control? We can use
   // CWnd::GetDlgCtrlID() to perform the most efficient test.
   if (pWnd->GetDlgCtrlID() == IDC_MYSTATIC)
   {
      // Set the text color to red
      pDC->SetTextColor(RGB(255, 0, 0));

      // Set the background mode for text to transparent 
      // so background will show thru.
      pDC->SetBkMode(TRANSPARENT);

      // Return handle to our CBrush object
      hbr = m_brush;
   }

   return hbr;
}

cheerz.....

"faith, hope, love remain, these three.....; but the greatest of these is love" -1 Corinthians 13:13

one question regarding dialogz!!!!!

namaskaaram3-Mar-05 22:46

namaskaaram

3-Mar-05 22:46

hi there CP fellowmatez.....
i am having a prob!!!!!
i have designed a dialog based application having many controlz(derived static controlz).....now i am supposed to add a new page to thiz dialog(what i mean is that i should be able to show the same dialog with different controlz on the dialog).....what r my chances of doing it on the same dialog without calling an another dialog????? Confused | :confused:

ps:right now i am able to load VISUALLY the second page of the panel BUT THE CONTROLZ OF THE FIRST PAGE REMAIN THERE(THOUGH VISUALLY NOT VISIBLE!!!!!)

HELP!!!!! Confused | :confused:

"faith, hope, love remain, these three.....; but the greatest of these is love" -1 Corinthians 13:13

Re: one question regarding dialogz!!!!!

Jetli Jerry4-Mar-05 0:27

Jetli Jerry

4-Mar-05 0:27

Hi Rateep,

If u want to display second page of panel in diff dialog... you can insert New Dialog to yr workspace, and add required controls.

If you want to pass some data from first dlg to second dlg then take HWND member of first dlg to yr second dlg. and create temp dlg when u need those data( using ::FromHandle() )

when u show second dlg you can hide first dlg by calling (ShowWindow(SW_HIDE))

doing both panels in one dlg is ok if u can handle SHOW / Hide of Such controls ... if there are more controls then i suggest to use another dlg.

Hope this helps

Jetli
Constant Thing In World Is Change.

thanx for reply....but that is not what i asked.....help!!!!!

namaskaaram4-Mar-05 0:35

namaskaaram

4-Mar-05 0:35

thanx for the reply.....but that iz not what i asked.....i do know that we can cll up dialogz from an another but ,my reqirement is to make change in that dialog itself!!!!!.....thatz the prob!!!!!

i wanted to know how one can add remove controlz from teh exixting panel and add new controlz(they are derived controlz).....

u u dou know any solution,ideas,wild guesses.....u r welcome!!!!!

and thanx again for the reply.....

"faith, hope, love remain, these three.....; but the greatest of these is love" -1 Corinthians 13:13

Re: thanx for reply....but that is not what i asked.....help!!!!!

Alton Williams4-Mar-05 3:38

Alton Williams

4-Mar-05 3:38

I agree with David.
In addition to that it's too much coding effort on your part Mad | :mad:

You can make use of:

<br />
CWnd::ShowWindow(SW_SHOW / SW_HIDE);<br />

Re: thanx for reply....but that is not what i asked.....help!!!!!

namaskaaram4-Mar-05 20:01

namaskaaram

4-Mar-05 20:01

sob!!!!!.....i guezz i have no choice.....i have to implement all in one dialog with the click of a botton.....itz the requirement!!!!!sob!!!!!...have any ideaz???

"faith, hope, love remain, these three.....; but the greatest of these is love" -1 Corinthians 13:13

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.