|
Just added an additional method to a COM server EXE. I've successfully used it on 3 projects however on one I get the 'The procedure number is out of range.' error when it calls the new method. I looked on MSDN which said the version number needs to change. So changed the file version and version() in the IDL file. Still getting the error.
The difference between the first two projects and the one that has the error is that the first 2 are executables. The last is a COM dll that uses the COM server.
Any ideas??
ed
~"Watch your thoughts; they become your words. Watch your words they become your actions.
Watch your actions; they become your habits. Watch your habits; they become your character.
Watch your character; it becomes your destiny."
-Frank Outlaw.
|
|
|
|
|
Have you added a method to an interface that is in use by existing applications (AKA published)?
PeterRitchie.com
|
|
|
|
|
I did..
I finally figured out what was going on. I went though and changed everything with it including GUIDs and anything else I could think of. I was still getting an error and remembered that I have a VB COM object that was using it too. So went to work on it and finally got things working happily again.
Thanks!!
ed
~"Watch your thoughts; they become your words. Watch your words they become your actions.
Watch your actions; they become your habits. Watch your habits; they become your character.
Watch your character; it becomes your destiny."
-Frank Outlaw.
|
|
|
|
|
[Message Deleted due to spam]
|
|
|
|
|
Check the register. I'm not a COM guru but I think that the problem is related with it. I mean, the register configuration says to COM where it can find the implementation of your class.
You probably have a key under HKCR\CLSID with the CLSID of your class. There should be a subkey:
InprocServer32, where is the dll path.
If you want a EXE server you have to add a subkey (LocalServer32) with the EXE path. And you have to call CoCreateInstance with CLSCTX_LOCALSERVER.
|
|
|
|
|
That errors means you haven't implemented the interface in the EXE. The supplied interface definitions tell use nothing about what the DLL or the EXE is implementing, or what is in the typelib for each.
If you're "sharing" the idl between the two objects and you've added the interface to the DLL from within Visual Studio it will have only implemented that inferface in the DLL, not the EXE.
PeterRitchie.com
|
|
|
|
|
Hi,
I am looking to implement/access these interfaces from either C++ or VB, but I am having trouble finding much detailed information about them.
Does anybody have a good starting point on these interfaces, sample code for implementing and exporting them from a C++ COM DLL or accessing and using them from within VB.
any help much appreciated
cheers
Michael
mpine@pegasussoftware.com.au
|
|
|
|
|
Are you looking for more information about ISyncMgrRegister or more information about implementing interfaces in C++ and VB?
PeterRitchie.com
|
|
|
|
|
I've successfully implemented AxWebBrowser in a windows form and it works fine.
Except the little flaw when client code pops up a window. 
The new window does not seem to have access to the same session or cookies.
But if I log in to the same site from IE the same time, the popup from my form works fine.
Any ideas how to solve this behaviour?
|
|
|
|
|
How are you popping up the window?
You can "popup" a window by telling your application to run IE (or whatever browser is the default) when opening the link; which will start the popup in a completely different context. If that's the case you need to popup the window in your application, not the default browser.
PeterRitchie.com
|
|
|
|
|
As far as I understood overloading with COM/AchtiveX-Components is not possible, i.e. you cannot have a component, that exposes overloaded methods like a C++ class. Something like
mycomponent::mymethod(long lVal)
mycomponent::mymethod(double dVal)
would not work. Am I right?
Now I'm wondering if the "Union" type in MIDL could be a solution to build an interface to pass for example exactly two well defined types (e.g. long and double) as a parameter to a method.
Of course I could use a variant as parameter and check inside the method if the passed parameters are of the types I wanted, but that would be some kind of late binding that would be checked at run time. If it was possible to pass some union, checks for right types would be done at compile time (early binding).
So, who can give me an example of how to handle union datatypes with automation COM components and what the interface should look like?
|
|
|
|
|
Automation generally implies you are supporting non C++ clients. Once you move beyond C++ clients, VB is by far the next most sophisticated consumer of COM objects. VB cannot use UNION types (other than the special case of a VARIANT type) and neither can any other type of Automation client (i.e. scripting languages). No point in creating an interface that no Automation clients can use.
You could create two methods, or you could pass both parameters as Optional.
Robert
|
|
|
|
|
Hi, Can somebody give me a sample or pointer on how to establish a virtual com port for Bluetooth USB dongle?
Thanks in adavance.
TW
|
|
|
|
|
|
I'm integrating a newly created COM component into an existing GUI. When the program returns from the following implicit call, the PIUnknown pointer gets set to zero and the program subsequently fails. I have no clue what's happening and I can't step into the function to see. Any Ideas would be greatly appreciated.
mark
|
|
|
|
|
MDowning wrote:
I'm integrating a newly created COM component into an existing GUI. When the program returns from the following implicit call, the PIUnknown pointer gets set to zero and the program subsequently fails. I have no clue what's happening and I can't step into the function to see. Any Ideas would be greatly appreciated.
Here is the function call:
hr = CoCreateInstance(rclsid, pOuter, dwClsContext, __uuidof(IUnknown), reinterpret_cast<void**>(&pIUnknown));
thanks, mark
|
|
|
|
|
Shouldn't that be:
hr = CoCreateInstance(rclsid, pOuter, dwClsContext, __uuidof(IUnknown), reinterpret_cast<void**>(&pIUnknown));
or did you not turn off HTML tags?
Have you verified that your pointer to the outer object is valid?
Robert
|
|
|
|
|
So what's the value of hr? CoCreateInstance reports the reason for a failure.
You do occasionally get badly-implemented COM components which return a success code when asked for their primary interface, but fail (returning E_NOINTERFACE) when asked for IUnknown. This is of course an implementation error - all components must implement IUnknown.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Are you calling CoInitialize(NULL)?
ed
~"Watch your thoughts; they become your words. Watch your words they become your actions.
Watch your actions; they become your habits. Watch your habits; they become your character.
Watch your character; it becomes your destiny."
-Frank Outlaw.
|
|
|
|
|
Hello,
i try to use late binding for office automation with powerpoint and c#.
I found some examples for word which work fine:
<br />
Type comType;<br />
object comObject;<br />
<br />
comType = Type.GetTypeFromProgID("Word.Application"); <br />
comObject = Activator.CreateInstance(comType);<br />
<br />
object o = comType.InvokeMember("Application", BindingFlags.Public | BindingFlags.GetProperty, null, oPptAppObject, null);<br />
...<br />
...<br />
So far everything works fine. The Compiler is happy 
But when i replace the ...("Word.Application")... with ...("PowerPoint.Application")...
i get an exception (which says: unknown name) for line with:
object o = comType.InvokeMember.....
Also "Application" is a Member of PowerPoint, like it is in Word.
I also tried other Members from PowerPoint but was not lucky.
I googled the whole day, but no solution.
Can anybody help me please?
It have no idea what to do.
Thanks a lot!
|
|
|
|
|
"Word.Application" is the ProgID, it doesn't mean access the "Application" member of "Word".
I don't have PowerPoint installed on my computer, just the Viewer. I would use "PowerPointView.Application" to instansiate the viewer.
Do you have PowerPoint installed on your computer?
PeterRitchie.com
|
|
|
|
|
In *.idl file:
interface Ixxxx : IDispatch
{
[id(1), helpstring("method GetData")] HRESULT GetData(LPCTSTR Key, DWORD *Data);
[id(2), helpstring("method SetData")] HRESULT SetData(LPCTSTR Key, const DWORD Data);
};Both these methods generate warning MIDL2039 : interface does not conform to [oleautomation] attribute : [ Parameter 'Key' of Procedure 'GetData' ( Interface 'Ixxxx') ]. Other than these warnings the interface seems to run correctly. Is it something I have to worry about or can I safely ignore them. If I have to worry about it, how do I go about fixing it? All MSDN says is make sure the interface is derived from IUnknown or IDispatch.
"You're obviously a superstar." - Christian Graus about me - 12 Feb '03
"Obviously ??? You're definitely a superstar!!!" mYkel - 21 Jun '04
Within you lies the power for good - Use it!
Honoured as one of The Most Helpful Members of 2004
|
|
|
|
|
Classes marked as "dual" have implied oleautomation attribute.
The oleautomation attribute simply means that the interface is compatible with older versions of Visual Basic, VBScript, JavaScript, etc. (i.e. untyped scripting languages).
If you don't need your interface to be compatible with any of those, then you can ignore the warning.
If you need to be compatible, you can get rid of the error by replaycing LPCTSTR with BSTR.
PeterRitchie.com
|
|
|
|
|
Thanks, I don't need them to be compatible (so far  ) but I hate getting warnings in my code, makes me nervous that I am doing something wrong. I changed the LPCTSTRs to const BSTRs and all is well.
"You're obviously a superstar." - Christian Graus about me - 12 Feb '03
"Obviously ??? You're definitely a superstar!!!" mYkel - 21 Jun '04
Within you lies the power for good - Use it!
Honoured as one of The Most Helpful Members of 2004
|
|
|
|
|
How Can I catch Key Event When I have focus on Webbrowser object in my application?There are a lot of articles about context menu etc, but no one has said anything about catching Key Event. Is there some solution by using some API or?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
