|
Thanks to shog9's response, I have the answer to my question. I have combined his solution
into my original code example so others my not have to dig quite a long and deep as I have
been.
Please be aware that I am a hack a total newbie to C++. I'm using Visual C++ 6.0.
Any mistakes are mine.
I have written a program to process a rectangular 2D data set and then output the 2D result
as a graphic. I have created a bitmap type structure with the resulting data. I was able
to figure out how to write the created bitmap out to a BMP file, then re-load the same file
and finally display the graphic. I wanted to be able to just display the graphic directly,
instead of first going to/from disk. With the info I got from shog9, I was able to
accomplish this goal. So, I am creating a bitmap graphic on-the-fly and then displaying it.
-------------------- Example Code ----------------
// MaxArrayDim = a const value defined earlier
BYTE aBitmapBits[MaxArrayDim * MaxArrayDim * 3];
//... A bunch of code is omitted where:
// - Raw 2D data is processed and mapped to RGB data and stored in aBitmapBits
// - Physical values are determined:
// NumOfBytes, NumCols, NumRows of the bitmap
// xLeft, yTop = coordinates to draw bitmap at
// xMaxWidth, yMaxHeight = size of display area
//
BITMAPFILEHEADER BitmapFileHeader;
BITMAPINFOHEADER BitmapInfoHeader;
RGBQUAD aColors[4];
BitmapFileHeader.bfType = 0x4d42; // = 'BM'
BitmapFileHeader.bfSize = NumOfBytes + 54;
BitmapFileHeader.bfReserved1 = 0;
BitmapFileHeader.bfReserved2 = 0;
BitmapFileHeader.bfOffBits = 54;
BitmapInfoHeader.biSize = 40;
BitmapInfoHeader.biWidth = NumCols;
BitmapInfoHeader.biHeight = NumRows;
BitmapInfoHeader.biPlanes = 1;
BitmapInfoHeader.biBitCount = 24;
BitmapInfoHeader.biCompression = 0;
BitmapInfoHeader.biSizeImage = NumCols * NumRows * 3;
BitmapInfoHeader.biXPelsPerMeter = 3780;
BitmapInfoHeader.biYPelsPerMeter = 3780;
BitmapInfoHeader.biClrUsed = 0;
BitmapInfoHeader.biClrImportant = 0;
// Not needed. No color map necessary for 24-bit.
aColors->rgbBlue = 0;
aColors->rgbGreen = 0;
aColors->rgbRed = 0;
aColors->rgbReserved = 0;
//Output as a BMP file
char FileName[] = "junk.bmp";
FILE *output_file; // output file pointer
// Open the data file for output and write file "junk.bmp"
if ((output_file = fopen(FileName, "wb")) != NULL)
{
// Output the File Header, Info Header and data bytes.
fwrite(&BitmapFileHeader.bfType, sizeof(short int), 1, output_file);
fwrite(&BitmapFileHeader.bfSize, sizeof(long int), 1, output_file);
fwrite(&BitmapFileHeader.bfReserved1, sizeof(short int), 1, output_file);
fwrite(&BitmapFileHeader.bfReserved2, sizeof(short int), 1, output_file);
fwrite(&BitmapFileHeader.bfOffBits, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biSize, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biWidth, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biHeight, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biPlanes, sizeof(short int), 1, output_file);
fwrite(&BitmapInfoHeader.biBitCount, sizeof(short int), 1, output_file);
fwrite(&BitmapInfoHeader.biCompression, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biSizeImage, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biXPelsPerMeter, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biYPelsPerMeter, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biClrUsed, sizeof(long int), 1, output_file);
fwrite(&BitmapInfoHeader.biClrImportant, sizeof(long int), 1, output_file);
// write out the data bits
fwrite(&aBitmapBits[0], sizeof(char), NumOfBytes, output_file);
fclose(output_file);
}
HBITMAP hBmp; // This is the target bitmap
HDC dcMap = CreateCompatibleDC(NULL);
ASSERT(dcMap);
// Set ReadGraphicFromFile manually & recompile to test different methods
// true = use LoadImage to get bitmap from file
// false = use CreateDIBSection and move data from memory
bool ReadGraphicFromFile = false; // set manually to test different methods
if (ReadGraphicFromFile)
{
// Load the bitmap data from file "junk.bmp", which was saved above.
CString szFilename("junk.bmp");
hBmp = (HBITMAP)::LoadImage(NULL,szFilename,IMAGE_BITMAP,0,0,
LR_LOADFROMFILE|LR_CREATEDIBSECTION);
}
else
{
// Here's the code I got from shog9 (modified to work here), including
// his explanations:
// DIBSections are pretty easy. You specify what you want (using a BITMAPINFO
// structure, like you already are), and Windows gives you memory that you can
// write to. You just pass in a pointer to the pointer you want to use to
// reference this:
unsigned char* phBmpBits = NULL;
hBmp= CreateDIBSection( dcMap,&infoMap,DIB_RGB_COLORS,
(void**)&phBmpBits,NULL,0 );
// Then you just need to copy your bitmap data into the memory Windows allocated
// for you:
memcpy(phBmpBits, &aBitmapBits, (NumCols * NumRows * 3));
// And you're ready to do something fun with your new bitmap. Don't forget to
// delete the bitmap when you're done with it though (using DeleteObject())...
// and that'll free the memory used as well, so don't be using that pointer
// afterwards. Enjoy!
}
CBitmap bmp;
bmp.Attach(hBmp);
CDC bmDC;
bmDC.CreateCompatibleDC(&dialogDC);
CBitmap *pOldbmp = bmDC.SelectObject(&bmp);
BITMAP bi;
bmp.GetBitmap(&bi);
dialogDC.StretchBlt(xLeft,yTop,xMaxWidth,yMaxHeight,&bmDC,0,0,
bi.bmWidth,bi.bmHeight,SRCCOPY);
bmDC.SelectObject(pOldbmp);
DeleteObject(hBmp);
------------- End of Example Code ----------------
I'm probably missing some more memory housekeeping here, so be careful!
|
|
|
|
|
Is it possible to create a thread from a non-member function? Is there another way to do this?
Here is my code:
#using <mscorlib.dll>
using namespace System::Threading
__declspec(dllimport) BOOL InstallHook();
void main()
{
ThreadStart* workDelegate = new ThreadStart(0, InstallHook);
// the rest..
}
I get error C3363 cannot create delegate handler for a non-member function or unmanaged class
Thanks
|
|
|
|
|
//simple code
STARTUPINFO si={0};
si.cb=sizeof(si);
si.dwFlags=STARTF_USESTDHANDLES;
CreateProcess(....,&si,....);
After parent process uses code above to create a child process, can parent read and write to si.hStdOutput, si.hStdError and si.hStdInput to child process directly without using function CreatePipe() to establish pipes to handles of si?
I remember that CraetePipe() must be used for communication between parent and child, but not sure, please comfirm if I am correct or wrong.
thx
includeh10
|
|
|
|
|
Hi,
I am trying to parse my XML file using the XML parser pXMLPArser to accomplish the following tasks-
pXMLParser->ReplaceNodeVale("input\userinputkey", szUserInput);
pADOObject->GetNextPrompt(pXMLParser->Getxml(), szxml();
pXMLParser->Release();
pXMLParser->Loadxml(szxml);
pXMLParser->GetNodeValue("output\messageid", szNodeVale);
Here's my XML file that I am trying to parse-
<?xml version="1.0" encoding="utf-8" ?>
- <root>
- <input>
<nodeid>0</nodeid>
<parentid>0</parentid>
<userinputkey>9167791963</userinputkey>
</input>
- <output>
- <vrurequestscript>
- <datainput>
<mainmsgid>100</mainmsgid>
<correctvalues>1,2</correctvalues>
<charset>12</charset>
<length>1</length>
<timeout>10000</timeout>
<timeoutmsgid>200</timeoutmsgid>
<retrycount>3</retrycount>
<retryexitaction>end</retryexitaction>
<retryexitmsgid>300</retryexitmsgid>
</datainput>
- <confirminput>
<mainmsgid>101</mainmsgid>
<correctvalues>1,2</correctvalues>
<charset>12</charset>
<accept>1</accept>
<reject>2</reject>
<length>1</length>
<timeout>10000</timeout>
<timeoutmsgid>200</timeoutmsgid>
<retrycount>3</retrycount>
<retryexitaction>end</retryexitaction>
<retryexitmsgid>300</retryexitmsgid>
</confirminput>
</vrurequestscript>
<nodeid>0</nodeid>
<parentid>0</parentid>
</output>
</root>
Can someone please show me how to go about doing it. This is my first time dealing with XML parser's so it's confusing getting an idea about people's classes that deal with parsers.
Thanks a bunch.
-Ray
|
|
|
|
|
Hi All,
Given a 24-bit image in a bitmap file, how do I draw it such that it appears to be "disabled" with transparent background?
I tried various ways such as combining DrawState with DSS_MONO, DSS_DISABLED but they did not give me a desired outcome.
Thanks in advance!
|
|
|
|
|
use BitBlt fuction with SRCAND or SRCPAINT
|
|
|
|
|
Not sure if the answer is simple or not, but I'm trying to track down a bunch of memory leaks in some code from an article here and in tracing through the code, my WTF-meter is starting to glow a bit. Does it make sense to define a member function as static, then within that method, call another static member function and then within the second static member function, create an instance of your self on the stack in order to call non-static functions and then invoke pseudo copy constructors to copy member data from the stack based object to parameters that were passed to the static member function call. If you can understand that description, my question really comes from, why would the functions be made static in the first place. Had they not been made static, there would be no need to instantiate a stack object, nor copy it's member data into parameters in the first place. It seems like jumping through hoops for the sake of hoop jumping. Any comments or thoughts? Thanks.
Chris Meech
I am Canadian. [heard in a local bar]
Remember that in Texas, Gun Control is hitting what you aim at. [Richard Stringer]
Nice sig! [Tim Deveaux on Matt Newman's sig with a quote from me]
|
|
|
|
|
Chris Meech wrote:
It seems like jumping through hoops for the sake of hoop jumping.
Sometimes this is the only exercise that programmers get! 
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
LOL. I guess the developer in question needed to lose some weight.
Chris Meech
I am Canadian. [heard in a local bar]
Remember that in Texas, Gun Control is hitting what you aim at. [Richard Stringer]
Nice sig! [Tim Deveaux on Matt Newman's sig with a quote from me]
|
|
|
|
|
Probably there are historical forces acting here. Maybe at one time a static function was useful without subsequently instantiating anything, and then life went downhill from there.
|
|
|
|
|
I make member functions static for a few reasons:
1. Entire class is composed of static functions and there is NO member data. No need to make an instance.
2. The static member function is used as a placeholder for a callback, the static function accepts data (such as the ubiquitous LPVOID or LPARAM) and casts it to a pointer of the class and then calls a non-static member function. This is very common to convert a parameter to _beginthreadex, for example, into a class' instance. Also, some Windows API callbacks allow you to pass 'user' data, which I usually make a pointer to a class.
3. The static function returns the pointer to the singleton class' instance.
No knowing much more about the class or its history, it seems like the class you describe needs some serious refactoring. Maybe it was a submission to the 'Obfuscated C++ Code Contest' 
|
|
|
|
|
Three very good reasons for making a class or member static. In this case, I suspect that some unknown history was at work here. The callback is a possibility that I will look at today. The code uses winsock.h extensively and so there may be some dependancy on this that I've overlooked. And I will be doing some serious refactoring in order to remove the memory leaks.
Thanks for the comments to all. 
Chris Meech
I am Canadian. [heard in a local bar]
Remember that in Texas, Gun Control is hitting what you aim at. [Richard Stringer]
Nice sig! [Tim Deveaux on Matt Newman's sig with a quote from me]
|
|
|
|
|
I need to get data from that Win32_PerfFormattedData_PerfProc_Thread class. How can I do that?
I need to get detailed info about thread.
Thanks.
Alex
|
|
|
|
|
There is an article about WMI on CodeProject!
Don't try it, just do it! 
|
|
|
|
|
|
HRESULT hr;
_variant_t v;
ULONG ulReturned;
DWORD dwAuthLevel;
IWbemLocator *pLocator;
IWbemServices *pService = NULL;
IEnumWbemClassObject *pEnum = NULL;
IWbemClassObject *pClass;
hr = CoCreateInstance(CLSID_WbemLocator, 0, CLSCTX_INPROC_SERVER, IID_IWbemLocator, (LPVOID *) &pLocator);
if (S_OK == hr)
{
hr = pLocator->ConnectServer(_bstr_t(L"root\\cimv2"), NULL, NULL, NULL, NULL, 0, NULL, &pService);
if (WBEM_S_NO_ERROR == hr)
{
hr = CoQueryProxyBlanket(pService, NULL, NULL, NULL, &dwAuthLevel, NULL, NULL, NULL);
hr = CoSetProxyBlanket(pService, RPC_C_AUTHN_DEFAULT, RPC_C_AUTHZ_NONE, NULL, dwAuthLevel,
RPC_C_IMP_LEVEL_IMPERSONATE, NULL, EOAC_NONE);
hr = pService->CreateInstanceEnum(_bstr_t("Win32_PerfFormattedData_PerfProc_Thread"),
WBEM_FLAG_RETURN_IMMEDIATELY | WBEM_FLAG_FORWARD_ONLY, NULL, &pEnum);
if (WBEM_S_NO_ERROR == hr)
{
do
{
hr = pEnum->Next(WBEM_INFINITE, 1, &pClass, &ulReturned);
if (WBEM_S_NO_ERROR == hr)
{
hr = pClass->Get(L"Caption", 0, &v, NULL, NULL);
if (VT_NULL != v.vt)
TRACE("Caption = %s\n", V_BSTR(&v));
}
} while (WBEM_S_NO_ERROR == hr);
pEnum->Release();
}
pService->Release();
}
pLocator->Release();
}
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
Thanks a lot. Thats what I need.
Alex
|
|
|
|
|
Is there an easy way to hide the taskbar button of an application. I found an MSDN article which makes the window a child of an invisible window. Has anyone found another way to hide the button that is a little less complicated?
|
|
|
|
|
Can anyone tell me how to write a change of color in c++ for a program running in ms-dos?
|
|
|
|
|
Better use QBasic 
Don't try it, just do it!
|
|
|
|
|
Change the color of what? Have you seen this API?
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
Dear All
I am a student of BS(CS).
I am doing my final project and thesis. I need some
help regarding my project
The Project title is:-
"Display Enlargement using Multiple Monitors and Image
Enhancement"
The objective is to make a software that can split
the primary monitor's display on 4 other monitors
(that are secondary monitors) shch like if we placse 4
moniters like a matrix they will show the same display
as primary monitor's display
Primary Moniror and secondary monitors are attach with
a single system unit that has 5 VGA Cards .
I am also sending u a jpg file that can help you to
illutrate the problem
The purposed solution where i have thought is make
resoloution 800 x 600 of primary monitor
and assign 400 x 300 to other secondry monitors.
But problem is that
1:- How can i detact VGA Cards
2:- How can capture video stream from one VGA and to Split or collect specific coordinates and sent this to other VGA's
3:- How can i change the resoloution of different in my program
4:- how can i assign them this resoloution.
If u find any information regarding this
please tell me OR If you have any new solution regarding this
please send me information and code as well on my e-mail touqeer_khan@yahoo.com.
The solution Should be in Visual C++ OR in Visual Basic
Thanking n anticipation.
Take Care
Regards
Touqeer
I will very thank ful to you for this consideration
Regards
Touqeer
Touqeer_khan@yahoo.com
|
|
|
|
|
My app registers filetype ".xyz" so that opening "fred.xyz" automatically
opens the data file in our app.
However ... if I click on a link to "fred.xyz" in internet explorer, it
simply opens it as text (.xyz is a text format). What additional steps are
needed to enable IE to launch my app when someone clicks on a link to
"fred.xyz" ?
Many thanks,
Steve
|
|
|
|
|
How did you go about registering the .xyz extension?
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
SetRegKey(HKEY_LOCAL_MACHINE, _T("software\\microsoft\\windows\\currentversion\\app paths\\MYPROG.EXE"), szPathName);<br />
SetRegKey(HKEY_LOCAL_MACHINE, _T("software\\microsoft\\windows\\currentversion\\app paths\\MYPROG.EXE"), szPath, _T("Path"));<br />
<br />
DelRegTree(HKEY_CLASSES_ROOT, _T("MyProg.File"));<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File"), _T("MyProg File"));<br />
<br />
CString szDefaultIconCommandLine;<br />
szDefaultIconCommandLine.Format(_T("%s,-%d"),szPathName,UI_CONFIG_DOCFRAME_ID);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\DefaultIcon"), szDefaultIconCommandLine);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\QuickView"), _T("*"));<br />
<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\open\\ddeexec"), _T("[open(\"%1\")]"));<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\print\\ddeexec"), _T("[print(\"%1\")]"));<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\printto\\ddeexec"), _T("[printto(\"%1\",\"%2\",\"%3\",\"%4\")]"));<br />
<br />
CString szPathDDE = szPathName + _T(" /dde");<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\open\\command"), szPathDDE);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\print\\command"), szPathDDE);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\printto\\command"), szPathDDE);<br />
<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\open\\ddeexec\\application"), szApplicationKeyValue);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\print\\ddeexec\\application"), szApplicationKeyValue);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\printto\\ddeexec\\application"), szApplicationKeyValue);<br />
<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\open\\ddeexec\\topic"), szTopicKeyValue);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\print\\ddeexec\\topic"), szTopicKeyValue);<br />
SetRegKey(HKEY_CLASSES_ROOT, _T("MyProg.File\\shell\\printto\\ddeexec\\topic"), szTopicKeyValue);<br />
<br />
SetRegKey(HKEY_CLASSES_ROOT, _T(".xyz"), _T("MyProg.File"));
a few names have been changed, etc
Any clues?
Steve
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
