|
HumanOsc wrote: 1.) You can use the SelectedIndex Property to check if an item is selected...
if(listView.SelectedIndex == -1)
return;
I don't have the definition SelectedIndex inside ListView. ('System.Windows.Forms.ListView' does not contain a definition for 'SelectedIndex')... I use VS .Net 2003 with CF 1.0.
I used this code, but I'm not sure if it has the same effect...
if (listViewCatalogo.SelectedIndices[0] == -1)
return;
Another question. In which point of the program should I use this code? Inside the definition of listViewCatalogo_SelectedIndexChanged event?
When I deploy I have the same errors. If I declare the control inside or outside the while clause I have this message: Error: index (I mean, the variable passed to the last testing form(FormProdotto).
|
|
|
|
|
Show only the relevand code, and use the pre tag to make it readable.
---
b { font-weight: normal; }
|
|
|
|
|
sorry, it was my first message and it was very important for me, I'll remember for the next time!
thank you
|
|
|
|
|
Ok, sorry it was my fault... Sometimes i mix two different classes...
I mean the SelectedItems Property...
<br />
if(listView.SelectedItems.Count == 0)<br />
return;<br />
You should check the collection if it's contains items, before you get anyone...
Well, in your app in the SelectedIndex_Changed handler...
<br />
if(listViewCatalogo.SelectedItems.Count == 0)<br />
return;<br />
<br />
i = listViewCatalogo.SelectedIndices[0];<br />
<br />
-- modified at 7:28 Tuesday 14th February, 2006
|
|
|
|
|
Thanks a lot, I made the changes and now the running is quite good!
Bye
Nino
Look Torino 2006 - - - - - FORZA ITALIA!!!
|
|
|
|
|
hi everyone,
I would need to get access to third party snapins in MMC so I can read information from these MMC snapins and store this information somewhere else into a text file. I don't need to modify this information, I only need to retrieve it, so I don't need to work with MMC manually in GUI form but can create reports in text file form from these MMC snapins. Do you have any idea if there is a way how to get this information from 3rd party snapins programatically (if possible in a consistent way) ?
thanks & regards,
krompo
|
|
|
|
|
i am trying to build a "missed message" queue on a C# TCP server. many
of the devices connecting are mobile and may drop out in bad signal
areas. i want to store any messages missed for when they reconnect.
so far....it takes activity on the client end to initialize the close.
isnt there a check when the server sends a socket.send to a client that
has lost connection? it takes a few minutes for the exception to get
hit, and i am losing vital time.
is there a way for as soon as the the server attempts Socket.Send it
can tell if the device on the other end still has an active connection?
even Socket.Poll() has quite a delay.
i have been testing with desktops. I connect two workstations to the
server and when i chat back and forth, i unplug one from the network.
it takes at least two minutes for the server to recognize that one
client is disconnected while the still-connected client is sending
messages. it seems they are just going nowhere.
|
|
|
|
|
please,
how can i make an activex control (i need an ocx file! and not a dll) with visual studio .net and c#?
thanks! kopi_b
|
|
|
|
|
Don't corss post in multiple forums. It's considered rude...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
In a vb. Net application I have to set user Level Code ACcess Permission. a Program Manager user can select a user and select applications he has permission to access.
So that when next time that user loggs in he won't be able to access those applications which he has no permission. I am not able to find a way to set Userwise FileIoPermissions . Pls Help me .
Indu
|
|
|
|
|
I have an app created by VS2003. The launch conditions of .net framework's supportedRuntime is V1.1.4322. It can be installed in those machine had this version. I have another machine that only have the newest version framework V2.0. When I installed it, it asks me to install the .net framework V1.1.4322. I think that should not happen when the computer has the newest version .net framework in it. But my app can't be installed. Is there anybody know how to solve this issue?
THANKS!!
Lisa
|
|
|
|
|
You might want to test your application under the 2.0 Framework before you worry about its installation. Breaking Changes in .NET Framework 2.0[^].
You'll just have to change the installer for the app. You could get away with removing the .NET Framework dependancy or possibly just changing the version of the dependancy to 2.0.(something I can't remember offhand).
The code itself will launch (by default) under the latest runtime if the specified runtime is not available. That doesn't mean that it'll work 100% the same as it did under 1.1.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I have changed the version of the dependancy to 2.0.50727, and it works fine under the 2.0 framework. But when I test in another workstation only have .net framework 1.1. The installation request it to install the .Net Framework 2.0, but my application should run under .net framework 1.1 without any problem.
How can I work around this? When the workstation has .Net framework version 1.1 and up, it doesn't need to install any more .net framework.
THanks, Dave!
Lisa
-- modified at 12:17 Friday 10th February, 2006
|
|
|
|
|
Whoops! My bad! It's a Dependancy, so without that version, the app won't install. You can put the version number back to the original value, then set the AllowLaterVersions property of the .NET Framework dependency to True. By doing this, you're specifying that your app needs at least version 1.1 of the Framework installed. Newer versions are acceptable for installation.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hello, Dave..That's so funny..I can't find the AllowLaterVersions property in Launch conditions -> .Net Framework ->property. There are only 4 propperties (Name, InstallUrl, Message, SupportedRuntime) and I'm using VS2003 version. Do you have any idea?
Lisa
|
|
|
|
|
Yikes! I though you were using 2005. That property doesn't exist in 2003.
About the best option you have, using the Setup and Deployment project in 2003, is to remove the dependancy entirely. The MSI will no longer check to see if the .NET Framework is installed.
You're better off using one of the other Installer builders or bootstrappers.
Google results[^]
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
The Subject says everything. Could you recommend me a good profiler (time and memory) for my programm written in C# 2.0???
thanks!!
regards
|
|
|
|
|
Hi,
Simple question for experienced programmers, I think.
I used to work with Visual Studio 2003 in combination with .NET framework 1.1
The development webserver now runs .NET framework 2.0
Now I've installed .NET Framework 2.0 on my development computer.
But when I try to create a new C# web application project on the server, VS tells me that the server does not have .NET framework 1.1, which is true.
What do I have to do to make .NET framework 2.0 the default framework in Visual Studio for new projects?
Greetings
Henk
|
|
|
|
|
redkite wrote: What do I have to do to make .NET framework 2.0 the default framework in Visual Studio for new projects?
Install Visual Studio.NET 2005.
Visual Studio.NET 2002 will only compile against the .NET Framework 1.0.
Visual Studio.NET 2003 will only compile against the .NET Framework 1.1.
Visual Studio.NET 2005 will only compile against the .NET Framework 2.0.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Ahh.. OK. 2005 it is then.
Isn't 2005 backwards compatible with .NET 1.1 also?
Greetings
Henk
|
|
|
|
|
2005 will not work at all with the 1.1 Framework. It's entirely dependant on the 2.0 Framework.
Remember that the compilers are NOT in Visual Studio, they're in the .NET Framework!
Most code generated by the 1.1 compilers will run under the 2.0 Framework, but there ARE breaking changes. Some 200 new classes were introduced in 2.0 and some 1200 changes made to existing classes.
Code generated by the 2.0 Framework will work under 1.1, but ONLY IF no classes and changed methods or properties were used that is specific to the 2.0 Framework.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I built an application in C# and add it a deployment project.
The Installation goes fine, but when I'm lunching the application it crashes and giving me this error:
EventType: clr20r3 P1: radioclocknew.exe P2: 1.0.0.0
P3: 43ea5327 P4: system.windows.forms P5: 2.0.0.0 P6: 4333aefa
P7: 1979 P8: 2 P9: pszqoadhx1u5zahbhohghldgiy4qixhx
On my computer it works great, it happens when I install it on other computer
|
|
|
|
|
I've never seen an error formatted like this. My first question would be does the other computer have the same version of the .NET Framework installed as you developed it under? It appears you're developed it under 2.0.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hello,
I created a C++ project and after I created an install project with my C++ output.
Visual Studio automatically detects C++ dependencies (MFC71.dll : VC_User_MFC71_RTL_X86_---.msm and MSVCR71.dll), but when I install these 2 Dll are in my install folder not in Windows System folder.
How can I put these 2 system dll directly in Windows System folder ?
thank you,
Freg
|
|
|
|
|
Hello,
I need to make an installer using the VS2005 Setup Project.
One of tasks is a language selection dialog.
The User Interface of Setup Project doesn't include an appropriate dialog
Because none of the dialogs doesn't comprise at least a ComboBox.
Using of Custom Action is not useful Because it appears too late in a middle of a installation process.
Any ideas?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
