|
|
Hi,
I am writing an ASP.NET web application to run reports against our Active Directory. Eventually we expect to have 30000 users in our AD. In general, users will run reports with filters that will restrict data returned from the AD. However, it is possible that users will run reports that return information for all users in our AD.
We are worried that the AD might be overloaded by running these LDAP queries. My question is, should I query the AD directly, or create a cache of all users (a DataSet) that is updated every few hours that I query instead?
Ideally, I would query the AD directly. I ran a report directly against the AD that returned a few simple user properties for 20000 users and CPU usage on one of our two domain controllers increased to 25% for about 1 second.
Any suggestions very welcome. I am not sure of the best way to proceed here.
Thanks.
-- modified at 5:28 Thursday 4th May, 2006
|
|
|
|
|
Mike Puddephat wrote: We are worried that the AD might be overloaded by running these LDAP queries. My question is, should I query the AD directly, or create a cache of all users (a DataSet) that is updated every few hours that I query instead?
In my opinion, I support you to use the dataset to cache all user information. This will reduce an overload to your server. But you have to make sure that all user information in your AD is change frequenctly or not. You should set an interval to update an information from your AD based an information of each user is updated on your server.
|
|
|
|
|
Thanks for your reply! I guess I was hoping that I wouldn't have to use a cache, but I think (like you say) it is probably the best way to go.
|
|
|
|
|
I'm on Windows Xp sp1, and i ran "RunDll32 advpack.dll,LaunchINFSection C:\WINDOWS\inf\msnetmtg.inf,NetMtg.Remove" to remove netmeeting completely because it was cousing me memory problems; i have recently re_installed Netmeeting and can now manage the memory problem but know it just won't start completely, i have already set up the "conf" with all my data / settings, but when i go to start netmeeting itself it just shows the splash then goes away: are their any fixes for this problem, and if their is what are they?
The problem could be that i have'nt gotten all the dll's needed to run netmeeting cuz when i was deleting it i just got rid of the entire folder. but all the dll's that it whan'ted it has because the error check did'nt asked for it, pluss i got a friend to just send me their entire netmeeting folder, and netmeeting still fails to start.
Thank you.
|
|
|
|
|
Remove it using Add/Remove Programs/Windows Components, reboot, then reinstall using the same procedure from the original CD. You may have to reapply SP1 after the reinstallation, as some of the files used may have been updated by the Service Pack.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
ok i found the cure.
You won't see netmeeting from "Add/remove programs/windos components" but what i did was install the inf itself all over again.
the msnetmtg.inf i think that officially stated to Windows that its a jenuwine program or something, can someone explain what different, only when i reinstall msnetmtg.inf netmeeting works again!
Even though conf.exe has all the resources it needs to start but it does'nt if msnetmtg.inf is not registard?
|
|
|
|
|
does anyone knows these code in asp .a friend of min has server he want to ban users . the users have ipchanger we need their computer general info . help would be appreciated
Display Adaptor: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Media Device: Realtek AC97 Audio
SCSI Adaptor:
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz
RAM Amount: 804044800
IDE ATA/ATAPI Controller: Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Disk Drive: Maxtor 4R040L0
CDRom: HL-DT-ST RW/DVD GCC-4481B
OS Version: Microsoft Windows XP, Service Pack 2
OS Registered Owner:
OS Registered Organization:
OS Product ID:
Language: English (United States)
Local Date Time: 20060430220130.843(Pacific Standard Time)
OS Login User Name:
OS Computer Name:
OS Domain/Workgroup:
Network Adapter MAC Address:
Last Login IP: 71.106.119.129
-- modified at 11:31 Monday 1st May, 2006
|
|
|
|
|
Your server won't have any access to any of this information.
The most your server is going to get is the information in the Http Headers, meaning the host IP address and its hostname. With an "ipchanger", the best you can do is ban the entire subnet that they're on. This, of course, will also ban legit users on that same subnet.
You could also write an ActiveX control that the users would have to install on their machines. You'd also have to re-code the site to use the information passed back by this control to determine the probable identity of that person. Also, you'll probably piss off legit users with this requirement too.
The bottom line is, the best solution is to upgrade the required information you need to register a user to include more "personal" and trackable information. You'll also have to be more careful about who you let use your site.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
So I've tried settin up a farm. So far so good. Both farmed machines can ping each other and the Cluster IP. The problem is no other computer can ping the cluster IP. Obviously that defeats the whole reason of having a farm if no one can see the cluster IP. Help?
E=mc2 -> BOOM
|
|
|
|
|
Hi, my laptop has a restoration feature which allow me to erase the current system and install windows directly on the machine. But last week, i have perform a clean install of windows xp and accidently delete the resoration partition. Now windows xp is running very slow and i want to restore back to original operating system (windows 2000) but i already delete it. So I could not install the previous license operating system. Under the laptop there is a CDKEY for the windows that i have licese with. But now i lost the software. I don't want to buy another windows license because it will cost me a price.
Could any one give me any suggestion to solve this problem?
|
|
|
|
|
|
Thank you very much for your information. Do you think the company still have the recovery CD because my laptop was produce around year 2000. Now it is 6 years old.
|
|
|
|
|
|
Bingo  Now i got the recover cd on both operating system and the driver for my laptop. Thank you very much for your suggestion.
|
|
|
|
|
fport is nice but you can only check your ports re-actively. Is there any tool which reports on port opening and closing on a event-based model? ie. fire off an alert OnPortOpen and OnPortClose?
If you were asked to code this, what'd be your approach?
|
|
|
|
|
Is this[^] answer to what you need?
|
|
|
|
|
I can send data files to a CD-ROM drive by right-clicking the file(s) and selecting CD Drive from the Send To menu. How can I do the same thing with the DVD-ROM drive? Does the OS come with something by default that will allow me to save files to a DVD-ROM drive. If not, any recommendations on a shareware solution?
Thanks,
DC
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"We will be known forever by the tracks we leave." - Native American Proverb
|
|
|
|
|
As far as I know, to burn the file to DVD you will need the software and DVD-RW. But I never see the SEND TO command to DVDROM. If you prefer to burn the file to DVD try to use NTI Software[^].
|
|
|
|
|
|
hi all,
i have an interesting question for u, i need to determine whether my machine supports 2 byte characters or 1 byte.
if i run my application it shud set the max limit allowed in a text box according to the locale set. like in English 1 byte and in Japanese 2 bytes. My code is written in VC++
Regards
|
|
|
|
|
and what is the question ?
if you ask for a C++ code question, ask it in the correct forum. 
|
|
|
|
|
|
Hi Friends,
I am developed a new personal web site. I want to host it in my LAN. I installed IIS 5.0. How can I host it in my lan.
Please help me
Thanks in advance
Jijo
JIJO BABY - Lets Play C#
|
|
|
|
|
I assume you have two NICs, or some other such arrangement that allows you to have one IP address for the Internet, and a separate one for the LAN. When you create a site in IIS you can assign it to a specific IP address on the host machine. Assign it to the LAN address, and it will not respond to HTTP queries on the WAN (Internet) side.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
