|
I have a user control on my asp.net page . This user control has 4 buttons on click of these buttons a new page opens below these user controls. Now after the page is opened and i click anwhere on the page the focus goes to 1st button in user control irrespective of the button i click. Hence when my user hits enter every time the first page opens. I have checked the code and there is no focus set for this in my code. I dont understand why it is happening. I wnt that when the user select a button the focus remains on it even if i click on the page.could some body help me..... I require it.............
-- modified at 5:34 Wednesday 28th February, 2007
|
|
|
|
|
Please don't use all capitals. I lost heart halfway through and stopped reading what you had written because it is just too much to read. Please use mixed casing.
the last thing I want to see is some pasty-faced geek with skin so pale that it's almost translucent trying to bump parts with a partner - John Simmons / outlaw programmer
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Do you use a postback to open the page below? If you do, then this is the cause of your problem, because ASP.NET doesn't maintain state like this between roundtrips. You could always use JavaScript to set the focus automatically.
the last thing I want to see is some pasty-faced geek with skin so pale that it's almost translucent trying to bump parts with a partner - John Simmons / outlaw programmer
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
hi ...
how can create an application that don't show in "task manager-- ctrl+alt+del"
|
|
|
|
|
i don't think so................
When you get mad...THINK twice that the only advice
Tamimi - Code
|
|
|
|
|
if you are building any desktop base application then don't write anything in the Text property of Form.
|
|
|
|
|
thank you
When you get mad...THINK twice that the only advice
Tamimi - Code
|
|
|
|
|
Why would you want to do this? This is the "holy grail" for virus writers.
You should never prevent the user from being able to kill your process because you can't foresee every eventuality, and if your application becomes a memory hog for some reason the user may want to kill it.
the last thing I want to see is some pasty-faced geek with skin so pale that it's almost translucent trying to bump parts with a partner - John Simmons / outlaw programmer
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Pete O`Hanlon wrote: Why would you want to do this? This is the "holy grail" for virus writers.
Asked and answered.
--
Rules of thumb should not be taken for the whole hand.
|
|
|
|
|
But if he's so inept that he doesn't know how to use Google, we don't really have much to worry about.
|
|
|
|
|
ROTFLMAO
the last thing I want to see is some pasty-faced geek with skin so pale that it's almost translucent trying to bump parts with a partner - John Simmons / outlaw programmer
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
I want to make a secure erase file tool using c#. I know that there are some rules to be followed when making such a tool(overwriting the file many times,renaming, truncating and than deleting), but i didn't manage to find a document or some site where all this is explained (all i found so far are tons of programs that offer me secure delete solutions, and some well written but old linux document on this matter ... from 96 till now thing have changed a bit ...). Can any of you offer me some recent documentation, or pointers on this ? Thanks.
If builders built buildings the way programmers wrote programs, then the first woodpecker that came along would destroy civilization. -Gerald Weinberg
|
|
|
|
|
hey,
i am developing an application, and i need to use something like voice recognition, but this time i want to recognize a sound in a video file, so i thought that i might write the code first to convert video formats to sound formats, and then use speech sdk to recognize that sound.
please could anyone tell me, how can i convert the video formats to sound, through C# code, or if there is another way to recognize that sound in video files.
waiting fro reply
thanx in advance.
--
Cordially,
AmroDigital
|
|
|
|
|
There's an excellent article here on CodeProject by Michael Dunn about intercepting NM_CUSTOMDRAW messages to modify the look of a ListView -- not as involved as OwnerDraw, though, which is nice.
Here's the link: http://www.codeproject.com/listctrl/lvcustomdraw.asp[^]
Unfortunately, the article is not written for C#. I was wondering how to hook into the message stream to intercept and act on NM_CUSTOMDRAW messages in C#. I asked at the article, but Michael does not know.
I've seen the example code in the C# help on using OwnerDraw, but that of course requires handling almost all of the drawing chores. Can we, in C#, hook into the message stream and just do custom draw type stuff like described in Michael's excellent article? If so, how? What event handler do I need? Where do I declare it? Stuff like that. Or do I have to create a ListView derived class and override the WndProc? (which I'd rather not do if I can avoid it)
|
|
|
|
|
Unfortunately, you do have to derive from the class and subclass the window. Subclass the ListView[^], and handle the WM_NOTIFY[^] message. When WM_NOTIFY is received, convert the memory that the lParam parameter points to to an NMHDR[^] instance, and check its code field. If it is set to NM_CUSTOMDRAW, convert the same memory to an NMLVCUSTOMDRAW[^] structure, and work with it as described in Mike's article.
|
|
|
|
|
Wow! One of the best answers I've received here at CodeProject.
Thanks a bunch for the links.
I'll work through it and see what I can do.
Thanks again.
|
|
|
|
|
Hmm. I'm sure this is a totally rookie problem.
I've done my fair share of casting in C++, but I'm pretty new to C#.
How do I cast the lParam to my NMHDR struct in C#?
In my class (which per the link you supplied is derived from NativeWindow), I have NMHDR defined:
private struct NMHDR
{
IntPtr hwndFrom;
IntPtr idFrom;
UInt32 code;
}
Then in the overridden WndProc, I have:
if (m.Msg == WM_NOTIFY)
{
}
And since I am pretty new to C#, I don't know the syntax for this casting.
|
|
|
|
|
OK. I answered my own question.
In case anyone else out there runs into this sort of problem, here's what I found (and it seems to be working):
if (m.Msg == WM_NOTIFY)
{
NMHDR nmHdr = new NMHDR();
nmHdr = (NMHDR)m.GetLParam(typeof(NMHDR));
if (nmHdr.code == NM_CUSTOMDRAW)
{
Debug.WriteLine("Got here.");
}
}
But now I have a different question (there's always something):
Where can I find all the info on the struct.s I need (including, but not necessarily limited to: NMHDR, NMCUSTOMDRAW and NMLVCUSTOMDRAW)? I can find them easily enough by searching MS KB, but is there a file somewhere that I can cut and paste from or just include in my code that already has all of this stuff defined (in C#)? Manually coding all of the structs is kind of a pain.
Thanks.
|
|
|
|
|
You may find what you need at PInvoke.net[^], but they don't have all of the Win32 structures defined.
|
|
|
|
|
Boy, I hope you're not getting irritated with this thread yet because I like learning stuff.
I'm just wondering if you've ever actually attempted what I'm talking about here. Your original response, and the associated links, made it seem as though this might be fairly easy. Unfortunately, the more I learn about it, the harder it seems to be getting.
I was thinking about writing an article discussing OwnerDraw vs CustomDraw to customize the look of a ListView, but the CustomDraw thing seems to be monumental. Just from the standpoint of defining all the structs involved: NMHDR is easy, NMCUSTOMDRAW is fairly straightforward but even that also involves a RECT structure; don't even get me started on NMLVCUSTOMDRAW which involves RECT and COLORREF which itself is fairly complex.
I am persistently running into unhandled exceptions involving read/write to protected memory which I am figuring must be due to not having completely figured all the structs out yet.
I retrieve the LParam using:
nmlvCust = (NMLVCUSTOMDRAW)m.GetLParam(typeof(NMLVCUSTOMDRAW));
and put it back into the LParam using:
Marshal.StructureToPtr(nmlvCust, m.LParam, true);
But somewhere along the chain of messages, at the GetLParam point, I get the access violation.
If you have any suggestions or ideas, please offer. If not, then I figure I'll abandon this for now and perhaps come back to it some other time.
Regardless, thanks for your input -- it has certainly pointed me into areas I've not explored. It's been pretty cool thus far. Thanks.
|
|
|
|
|
David Fleming wrote: Boy, I hope you're not getting irritated with this thread yet because I like learning stuff.
Nope! 
David Fleming wrote: I'm just wondering if you've ever actually attempted what I'm talking about here. Your original response, and the associated links, made it seem as though this might be fairly easy. Unfortunately, the more I learn about it, the harder it seems to be getting.
The devil is in the details!  No, I've never attempted to do a custom-draw listview, but I've worked with notification messages before, and this is a pretty typical case for them. I've got a lot of experience with interop, which is why I make it sound easy... but it's only easy if you've dealt with this stuff a lot.
COLORREF==int. You can use ColorTranslator.FromWin32() to convert it to a Color. Your NMLVCUSTOMDRAW structure should look like this:
[StructLayout(LayoutKind.Sequential)]
struct NMLVCUSTOMDRAW
{
NMCUSTOMDRAW customDraw;
int textColor;
int textBackColor;
int subItemIndex;
uint itemType;
int faceColor;
int iconEffect;
int iconPhase;
int partID;
int stateID;
RECT textRect;
uint groupAlignment;
}
NMCUSTOMDRAW, RECT, and NMHDR can be found on PInvoke.net[^].
Let me know if this is the same as or different than what you are doing. If it is the same, then the problem must lie elsewhere besides the struct definitions.
If you need to support versions before Common Controls 6, but still want to support the XP features when they're available, you can use a BinaryReader instead of structures. I'll give you more on that if you want.
|
|
|
|
|
The good news is that the memory exception went away when I fixed all the structs (using mine as well as your new one).
The bad news is that it still isn't actually doing anything.
I'll include my overridden WndProc for you to look at, and I'll make a couple of comments on it below:
protected override void WndProc(ref System.Windows.Forms.Message m)
{
base.WndProc(ref m);
if (m.Msg == WM_NOTIFY)
{
nmlvCust = (NMLVCUSTOMDRAW)m.GetLParam(typeof(NMLVCUSTOMDRAW));
if (nmlvCust.nmcd.hdr.code == NM_CUSTOMDRAW)
{
m.Result = (IntPtr)CDRF_DODEFAULT;
Debug.WriteLine("In CustomDraw. dwDrawStage = " + nmlvCust.nmcd.dwDrawStage ". Result = " + m.Result);
if (nmlvCust.nmcd.dwDrawStage == CDDS_PREPAINT)
{
m.Result = (IntPtr)CDRF_NOTIFYITEMDRAW;
Debug.WriteLine("In PrePaint. dwDrawStage = " + nmlvCust.nmcd.dwDrawStage + ". Result = " + m.Result);
}
else if (nmlvCust.nmcd.dwDrawStage == CDDS_ITEMPREPAINT)
{
m.Result = (IntPtr)CDRF_NOTIFYSUBITEMDRAW;
Debug.WriteLine("In ItemPrePaint. dwDrawStage = " + mlvCust.nmcd.dwDrawStage + ". Result = " + m.Result);
}
else if (nmlvCust.nmcd.dwDrawStage == (CDDS_ITEMPREPAINT | CDDS_SUBITEM))
{
if (nmlvCust.iSubItem == 0)
{
nmlvCust.clrText = ColorTranslator.ToWin32(SystemColors.Control);
nmlvCust.clrTextBk = ColorTranslator.ToWin32(SystemColors.Info);
}
else if (nmlvCust.iSubItem == 1)
{
nmlvCust.clrText = ColorTranslator.ToWin32(SystemColors.WindowText);
nmlvCust.clrTextBk = ColorTranslator.ToWin32(SystemColors.Window);
}
else
{
nmlvCust.clrText = ColorTranslator.ToWin32(SystemColors.HighlightText);
nmlvCust.clrTextBk = ColorTranslator.ToWin32(SystemColors.Highlight);
}
m.Result = (IntPtr)CDRF_NOTIFYSUBITEMDRAW;
Debug.WriteLine("In SubItem. dwDrawStage = " + nmlvCust.nmcd.dwDrawStage + ". Result = " + m.Result);
}
}
Marshal.StructureToPtr(nmlvCust, m.LParam, true);
}
}
What I've noticed is that everything seems to be working OK except that we never get dwDrawStage equal to CDDS_ITEMPREPAINT | CDDS_SUBITEM. You will notice that the constants for CDRF_NOTIFYITEMDRAW and CDRF_NOTIFYSUBITEMDRAW are the same (0x20). In the cmmctrl.h file, they are in fact the same with a little note to the side of CDRF_NOTIFYSUBITEMDRAW saying:
So, there are two things I just don't get at this point:
1) Even though I essentially lifted this code directly from Michael Dunn's article (which, by the way I have used in C++ and it worked beautifully), the logic isn't working here like it does under C++ -- somehow, under C#, we're just not getting dwDrawStage == CDDS_ITEMPREPAINT | CDDS_SUBITEM like we do under C++.
2) Another thing I've noticed is that the iSubItem member of the NMLVCUSTOMDRAW is not getting set. I presume this has something to do with problem #1, since we evidently are not actually getting to the SubItem part of drawing.
Also, even if I eliminate the subitem part of the logic and try setting colors in the item level, it still does not actually cause any change on the screen. All I can notice upon running the program is that the first item in the ListView flashes very quickly. I assume something is being done, just not what I want.
Any suggestions on why the logic isn't getting down to the subitem level? or what to do next?
Thanks. BTW, let me know if you run out of patience or time for this -- I do this stuff just for fun -- I'm guessing you do this sort of thing for a living.
-- modified at 17:50 Thursday 1st March, 2007
Something else I noticed is that the dwItemSpec of the NMCUSTOMDRAW struct (which is a member of the NMLVCUSTOMDRAW struct) seems to correspond to the subitem (or column), because when I change the number of columns and watch the loop cycle through, the dwItemSpec always has the same number of iterations as the number of columns. So what I'm thinking might be happening here is that I am getting the subitems but not getting each ITEM. First, I don't know how to confirm that or rule it out, and second, I don't know what to do about it if that is the case.
|
|
|
|
|
I created a new control derived from MaskedTextBox. The new control should react on a change of its Culture property, i.e. if the user changes the Culture something like a CultureChanged(object sender, someArgs e) event should be fired. I want to use this event to change some internal setting in the new control.
I have no clue how I can attach an event to the Culture property so it is fired, when the value of Culture changes. I tried to override the Culture property and to fire an eventhandler there, but unfortunately Culture can not be overriden (or at least I didn't figure out how).
Has anybody an idea how I could do it? I would be very glad for any hint in which direction to go.
Thanks
Dirk
|
|
|
|
|
Take a look at the new Modifier[^].
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." - Rick Cook www.troschuetz.de
|
|
|
|
|
Dear All,
I have an n-tier application that is devided into main three parts:
1. UI -> Windows From (dot Net Framework 2.0).
2. BL -> Web Services.
3. DB -> SQL Server 2005.
The Problem Is:
There are crystal reports files on the server and i need to display them
but the windows form crystal viewer - as i know - doesn't take a URL as a report path and for security issues i cann't put my crystal files along with the exe or along with the client machine...
soo please help.....
Ala'a Al Atrash
Special Systems Co.
Culture St. - Amman - Jordan
Software Developer
Work Tel:- +962 6 5664221 Ext. 140
Home Tel:- +962 6 4752702
Mobile Tel:- +962 7 96700423
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
