Re: Copy the data in List control using ctrl+C [modified] - C / C++ / MFC Discussion Boards

Copy the data in List control using ctrl+C

shir_k5-Sep-07 23:12

5-Sep-07 23:12

Hi Everyone,

Am new to VC++.Am using list control(report type) to represent my data obtained from serial port.Am able to select the data in the list control but not able to copy. Should i need to write any code for copying data from control list.I don't want to copy the data to any other controls with in the project.What i need is to select the data in control list, press ctrl+c and copy the data to notepad/word.Please help me out.

Thanks in advance

Re: Copy the data in List control using ctrl+C

ThatsAlok5-Sep-07 23:31

ThatsAlok

5-Sep-07 23:31

shir_k wrote:
Should i need to write any code for copying data from control list

yes you have to write the code for implement same. look this code for copying data in to clipboard memeory http://www.codeproject.com/clipboard/archerclipboard1.asp[^]

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
Never mind - my own stupidity is the source of every "problem" - Mixture

cheers,
Alok Gupta
VC Forum Q&A :- I/IV
Support CRY- Child Relief and You

Re: Copy the data in List control using ctrl+C

shir_k6-Sep-07 1:18

shir_k

6-Sep-07 1:18

HI,

I went through the link u have sent that doesn't matches with my requirement.First thing is am using control list box and am not having any button to copy.What i need is
1) Select the data in the control list by using mouse
2)copy by pressing ctrl+ C
3)pasting in a notepad or word document(outside the project).

Thanks

Re: Copy the data in List control using ctrl+C

Nishad S6-Sep-07 1:38

Nishad S

6-Sep-07 1:38

Use accelerator for Ctrl + C. Thus you will get the event (Ctrl+C press) and follow as ThatsAlok said

- NS -

Re: Copy the data in List control using ctrl+C

shir_k6-Sep-07 2:27

shir_k

6-Sep-07 2:27

Could u plz tell me how to use accelerator for Ctrl+c

Re: Copy the data in List control using ctrl+C

David Crow6-Sep-07 3:19

David Crow

6-Sep-07 3:19

From within the IDE, press Ctrl+R and select Accelerator from the list of types. Click the New button. Double-click the newly added accelerator item. Check the Ctrl checkbox. Type a C in the Key combobox. Press Enter. You should now have a Ctrl+C accelerator key. Check out the LoadAccelerators() function.

"A good athlete is the result of a good and worthy opponent." - David Crow

"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne

Re: Copy the data in List control using ctrl+C

ThatsAlok6-Sep-07 5:02

ThatsAlok

6-Sep-07 5:02

you have to handle WM_KEYDOWN message for ctrl+c and there you have to read the text from listctrl and copy that into clipboard.. which can be copied anywhere using ctrl+ v

Re: Copy the data in List control using ctrl+C [modified]

shir_k8-Sep-07 19:52

shir_k

8-Sep-07 19:52

Hi Guys,

Can u ppl please explain step by step how to do it.Sorry for the trouble.
Am writing code in MFC Application.
Thanks for the help i was able to do it.

-- modified at 1:33 Wednesday 12th September, 2007

UDP Server

Andy2025-Sep-07 23:01

Andy202

5-Sep-07 23:01

I would like my UDP server to send the data when the client connects; say at a rate of 100 msec.
But I can only get it working when the Server does a receive first (so the client has to do a send) then the Server does the send.

Can this be done? The server fails if I do not do the Receive and the client fails if I dont run the server first.

See code below:-

	while(g_bUDP_Socket_Created && g_bUDPStatus)<br />
	{<br />
		bytesRead = recvfrom (conn_socket, (char *)&RxBuffer, sizeof(RxBuffer), 0, (struct sockaddr *)&from, &length);<br />
		// bytesRead = recv(conn_socket, BufferIn, sizeof(BufferIn), 0);<br />
		// Check for error and terminate the thread if any found<br />
		if (bytesRead == SOCKET_ERROR) <br />
		{<br />
			g_szFormatting.Format("Couldn't receive data, %d",WSAGetLastError());<br />
			::MessageBox((HWND)NULL,g_szFormatting, NULL,MB_ICONEXCLAMATION );<br />
			closesocket (conn_socket);<br />
			WSACleanup();<br />
			return -1;<br />
		}<br />
<br />
		retval = sendto (conn_socket, (char*)TxBuffer, sizeof(Tx_Data), 0, (struct sockaddr *)&from, fromlen);<br />
		if (retval == SOCKET_ERROR)<br />
		{	<br />
			g_szFormatting.Format("Couldn't send data, %d",WSAGetLastError());<br />
			::MessageBox((HWND)NULL,g_szFormatting, NULL,MB_ICONEXCLAMATION );<br />
			closesocket (conn_socket);<br />
			WSACleanup();<br />
		}<br />
	}

Re: UDP Server

Mark Salsbery6-Sep-07 5:51

Mark Salsbery

6-Sep-07 5:51

Are you getting an error? If so, what is the error code returned by WSAGetLastError()?

Andy202 wrote:
say at a rate of 100 msec.

That isn't a rate, that's a duration.

Mark

Mark Salsbery
Microsoft MVP - Visual C++
Java | [Coffee]

Re: UDP Server

Andy2026-Sep-07 10:58

Andy202

6-Sep-07 10:58

If I comment out the receive I get error 10057 on the send.

All I want to do is transmit a UDP message at 10Hz. The client can be running or not. I will use port 5001, but I do not need to know the client PC.

The client will need to know both Port and PC - correct?

Andy.

Re: UDP Server

Mark Salsbery6-Sep-07 11:33

Mark Salsbery

6-Sep-07 11:33

Andy202 wrote:
If I comment out the receive I get error 10057 on the send.

The error is WSAENOTCONN.
That's expected since you're using the "from" address from the recvfrom(),
which isn't going to be a valid address without a successful recvfrom() call.

Andy202 wrote:
I would like my UDP server to send the data when the client connects;

UDP is connectionless so you don't know if a client is connected or not.

It sounds like you need to either...

1) Keep track of clients that are listening - that would mean a client has to send a notification to
the server when it's ready to receive datagrams. The server can store a list of "connected" clients and
send the periodic datagrams to every address on the list.

2) Broadcast the periodic datagrams. Set the socket option SO_BROADCAST on the socket and send
to the broadcast address (INADDR_BROADCAST). The clients need to set the SO_BROADCAST socket option
as well.

Mark

Mark Salsbery
Microsoft MVP - Visual C++
Java | [Coffee]

Re: UDP Server

Andy2027-Sep-07 4:48

Andy202

7-Sep-07 4:48

Thanks again for your Post Mark, I now get Error = 10057 when the Client is not running and Error = 10093 when the Client is running.

// Setup port addresses<br />
local.sin_family = AF_INET;<br />
local.sin_addr.s_addr = INADDR_BROADCAST;<br />
local.sin_port = htons(port);<br />
<br />
conn_socket = socket(AF_INET, socket_type, 0); /* Open a socket */<br />
<br />
if (setsockopt (conn_socket, SOL_SOCKET, SO_BROADCAST, (char *) &TxBuffer, sizeof (TxBuffer)) == SOCKET_ERROR)<br />
{<br />
	closesocket (conn_socket);<br />
	g_szFormatting.Format("setsockopt() failed: %d\n",WSAGetLastError());<br />
	ReportMessages(g_szFormatting);<br />
	WSACleanup();<br />
	return false;<br />
}<br />
<br />
//Make it so you can attach more than one thing to a socket<br />
if (setsockopt (conn_socket, SOL_SOCKET, SO_REUSEADDR , (char *) &optval, sizeof(optval))  == SOCKET_ERROR)<br />
{				<br />
	g_szFormatting.Format("Couldn't set SO_REUSEADDR %d\n ", WSAGetLastError());<br />
	ReportMessages(g_szFormatting);<br />
	closesocket (conn_socket);<br />
	WSACleanup();<br />
	return false;<br />
}

And in the Writer Thread:-

while(g_bUDP_Socket_Created && g_bUDPStatus)<br />
{<br />
<br />
retval = sendto (conn_socket, (char*)TxBuffer, sizeof(Tx_Data), 0, NULL , 0);<br />
	if (retval == SOCKET_ERROR)<br />
	{	<br />
		g_szFormatting.Format("Couldn't send data, %d",WSAGetLastError());<br />
		::MessageBox((HWND)NULL,g_szFormatting, NULL,MB_ICONEXCLAMATION );<br />
		closesocket (conn_socket);<br />
		WSACleanup();<br />
	}<br />
	Sleep(1000);<br />
}<br />
// Close the Winsock and tidy up<br />
closesocket(conn_socket);<br />
WSACleanup();

Re: UDP Server

Mark Salsbery7-Sep-07 5:22

Mark Salsbery

7-Sep-07 5:22

Error 10093 WSANOTINITIALISED Successful WSAStartup not yet performed

Also...

You need to create a proper UDP socket:

conn_socket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP

); /* Open a socket */<br />
<br />

and sendto() needs a destination address.

Mark

Mark Salsbery
Microsoft MVP - Visual C++
Java | [Coffee]

Re: UDP Server

Andy2027-Sep-07 9:13

Andy202

7-Sep-07 9:13

One final question Mark, if I just want to Broadcast UDP packets out on a local network, what destination address do I use?

Re: UDP Server

Moak8-Nov-07 12:37

Moak

8-Nov-07 12:37

Andy202 wrote:
I just want to Broadcast UDP packets out on a local network, what destination address do I use

You could use the limited broadcast address 255.255.255.255, however it is best to use the correct IP broadcast address of your local network segment (more successful in my own experience). You can calculate the correct broadcast address, see here.

/M

Home page

how to establish usb communication in MFC?

ashokbngr5-Sep-07 22:43

ashokbngr

5-Sep-07 22:43

Hi,

I need any sample..code or advice for usb communication in MFC.
I need to do read and write operations on a usb device.. Confused | :confused:

thanks in advance
Ashok

Re: how to establish usb communication in MFC?

Cedric Moonen5-Sep-07 23:16

Cedric Moonen

5-Sep-07 23:16

Which kind of device are you communicating with ? USB doesn't work like a serial port: you don't have access directly to the port but instead you get the handle of a driver. This driver is shipped with the device you want to communicate with and manages all the communication with the device.

To get the handle of the driver, simply call CreateFile supplying the correct driver name, then you should be able to use ReadFile and WriteFile. You can also do some more specific stuff by calling DeviceIOControl (in which you can pass some specific IO code which is dependent of your driver).

So, if you want more help, you'll need to give a lot more information (which device do you try to access, if you have documentation with it, ...).

Cédric Moonen
Software developer

Charting control [v1.2]

numerical methods

mitsui585-Sep-07 22:00

mitsui58

5-Sep-07 22:00

can anybody help me make a program that can do any of these numerical method?

moss,newton method, secant method, taylor-maclauren,bisection method,gaussian elimination, gauss-seindal,lagrange method.

thanks guys!! Big Grin | :-D

Re: numerical methods

Russell^'5-Sep-07 22:39

Russell^'

5-Sep-07 22:39

homework?

don't tell me that you don't find the way to implement the secant-method or bisection method! Big Grin | :-D

You have only to implement the algorithm:

ask for a function f(x) and for the borders x1 and x2.
check that sign(f(x1)) != sign(f(x2)) .
Then compute x3 inside the interval (x1, x2). This according on the algorithm, in bisection case x3=(x1+x2)/2,....in secant method it's only the point where the line from (x1,f(x1)) to (x2,f(x2)) intercept the x-axe.
then choose the new interval (or x1-x3 or x3-x2) according on where is the root.
Then start again on the new interval.
Do this 10000...000 times and stop it. Or stop when the interval is "too small".

That's it.
Smile | :)

Russell

Re: numerical methods

mitsui585-Sep-07 22:53

mitsui58

5-Sep-07 22:53

thanks russell!

it a project actually.. Smile | :)

Re: numerical methods

Russell^'5-Sep-07 23:13

Russell^'

5-Sep-07 23:13

ok, you convinced me.;)
Then you won this link[^].
Big Grin | :-D

(the routines are in C, not in C++. but it is easy to translate they)

Russell

Re: numerical methods

mitsui587-Sep-07 4:35

mitsui58

7-Sep-07 4:35

thanks for the link Smile | :)

that's really helpful.

Re: numerical methods

David Crow6-Sep-07 3:28

David Crow

6-Sep-07 3:28

mitsui58 wrote:
can anybody help me make a program that can do any of these numerical method?

Yes, I'm sure someone can.

"A good athlete is the result of a good and worthy opponent." - David Crow

"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne

Re: numerical methods

ollydbg239-Sep-07 1:05

ollydbg23

9-Sep-07 1:05

you can use the GNU scientific library.
It will give your the needed method.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.