Win Mobile: How to draw an "always on top" graphical element? - Mobile Discussion Boards

It's not officially supported, I'm afraid. The 'Extra Dialling Commands' field is a field of the opaque structure pointed to by the lpbDeviceInfo parameter passed to RasSetEntryProperties which isn't officially documented. Strictly it can be whatever the TAPI (Telephony API) provider for this phonebook entry wants it to be.

For standard dial-up connections, though, the TAPI provider is the Universal Modem (Unimodem) provider. If you have access to the Windows CE shared source code, you discover that it's a DEVMINICFG structure. You'll have to see that source for the definition of the structure and how to use it.

The only supported way of editing this information programmatically is on Windows Mobile 2003 and later, using configuration XML with the CM_PPPEntries configuration service provider. However, normally WM2003 and later devices with a GSM/GPRS radio will ship with Phone Edition and offer a direct Cellular Radio TAPI Provider, which can be used with the CM_GPRSEntries configuration service provider.

DoEvents: Generating unexpected recursion since 1991

Thanks Mike for the information about the DEVMINICFG structure under the TAPI, at least now I have a starting point to check into!

Could you please provide the code to set the unimodem dial up connection properties on Win ce 5 using c#... I need to set programatically baud rate, stop bit, flow control, extra dial up string etc.,
Thanks in advance...

my mail id is prajwal_ap@yahoo.co.uk

hi sir,

I am developing a windows application in C# where i have a small part to send sms to the number specified. i went through the article
http://support.microsoft.com/kb/555578.
(SMS services in ASP.NET Mobile Web Application)
and i used the webservice which you have mentioned here. i am not developing a mobile asp.net application but a normal windows application in C# 2005.

i added the webreference to the webservice and used the code. when i run the application,

however i get a error saying that a firewall is not allowing to estabilish remote connections and that a exception is set. i removed all exceptions and run the program again.

i still get the same problem.

Can you please suggest me any ideas on how to proceed?

Thanks in advance

Regards

Anuradha

Thanks in advance. Smile | :)

Regards

Anuradha

Hi,

I am trying to get a sampleclient application for wince working. When running the app on the pocket pc the message is that it can not find a certain certificate file; however, even after putting the the certificate file in the same directory as the sampleclient app it still produces the same message.

How about changing the source (sampleclient.c file) to have a preprocessor command which outputs the current directory for running the app? Maybe the app runs from some other directory not so obvious. Also, what is the method of getting the current directory?

Thanks,

Pooyan

Hi Pooyan,
There is no current directory in WinCE. All file names must be specified from root: \<path>\<filename>.
cheers,
AR

Hello,
Which are the faster functions in order to write a file in PPC 2003 & WM5?
I must write string in a file in a cycle and must be fastest possible!
I use C# ...
Thanks a lot.

Alex

Hey all,

I'm porting a small smartphone application to Windows Mobile 5/6. I am a bit stumped by the following:

The app consists of a small graphical rectangle which is always on top - basically a status bar. It should be painted on top of whatever else the win mobile os does. Ie. the win mobile OS works as usual with paint, input handling etc in everything it does, only with this custom graphical element overlay always painted on top of part of the screen.

Is there an elegant way of doing this?
(bonus points if it's possible to implement in managed / C# code)

Best regards,
Thomas Kjeldahl Nilsson, Oslo

Hello to all seniours, i am an university student frm kolkata, i am developing a project....wherein i encountered a severe problem...the idea is i will be having a pda and a couple of servers....now i m to download something from the server in the pda...however the connection can be via bluetooth or wifi or gprs i.e when it is within the range of bluetooth it uses bluetooth, after that wifi and finally through gprs.....now i am stuck in the wifi thing.....is there anyway to implement wifi connection through a j2me/java program? i am totally a newbie, so plz correct me if i m asking the wrong question! plz help
thnx in advance

Hallo. I am having the following problem;
i want to move into a .txt file, e.g move by 3 characters from line 1,position 1 to line 1,position 10.
I am using StreamWriter but it does not support something like move or seek method to move into the file.
What i am trying to do exactly is writing a name into first line and then go into position 25 of the same line and writing the surname.Same for the following lines. Any ideas how to move the cursor?
Thank you in advance for any help given.

Hi Is it possible to send SMS from a PC that is connected to a Windows Mobile Phone?
For example using VC++ 2005 and Windows CE 5
Thanks

Is it possible to develop mobile applications using VS express?

I think you have to have VS2005.

_____________________________________________
Flea Market! It's just like...it's just like...A MINI-MALL!

Hi to All,

 I want to develop a application for Black Barry device. Can someone guide me which Technology is suitable for it, and which kind of tool i have required on my development Machine.

?) <code>Can i developed application in (.Net 2005 Compact Framework 2.0 )C#.Net ?</code>

Please Help Me.... Frown | :(

Thanks

Pavan Pareta

Hi All,
how are you doing there? Must be fine. I am getting a terrible stack over flow exception error in my PDA application. And I simply can't under stand why this is happening? Currently I am working on a project where the user has to inspect a vehicle for different failures.
The flow is like this. There is a form named Select Inspection where the user selects the vehicle id and clicks on Inspection. Then It will go to the next screen where the user presses start inspection. After clicking on that the next form will display a list of categories such as cab test, brake test, emission test etc and all these values comes from the database and buttons are created according to the category. When the user clicks on a particular category different question will come on the screen under that category. It will also come from the database and the buttons are created at runtime. Then when the user clicks on a particular question in the next screen he has to pass or fail the question. Whatever button the user clicks, it then again comes back to the questions form and a tick or cross mark is displayed according to pass or fail. After answering all the question the user has to click on pass button at the bottom of the question screen. Then it will go back to the category screen and an associated image will be displayed on the right side of the category. All these buttons and pictures are created at run time. All these are working well for 7 question ...But when I click on the 8th question it is showing the stack over flow exception. I am here also giving mu code snippet.

Start Inspection Form...

private void button1_Click(object sender, EventArgs e)
{
CatgoryQuestion cc = new CatgoryQuestion();
cc.ShowDialog();
this.Close();
}

Category Form
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace AIS_Start
{
public partial class CatgoryQuestion : Form
{
public CatgoryQuestion()
{
InitializeComponent();
}
private const string LOCALDATABASE = "\\My Documents\\AISNEW.sdf";
private const string CONNECTIONSTRING = "data source=" + LOCALDATABASE;//connection string for local database
private SqlCeConnection ceConn = null;
Button btn;
int a, b, c, d, i, f, g;
PictureBox pic;

private void CatgoryQuestion_Load(object sender, EventArgs e)
{
this.Text = "Vehicle Inspection";
a = 30;
b = 50;
c = 52;
d = 0;
f = 0;
ceConn = new SqlCeConnection(CONNECTIONSTRING);
ceConn.Open();
string sSQL = "SELECT QuestionID, Title, Reference1, Reference2 FROM QuestionTree WHERE ParentId = 0 AND TemplateID = '19' ORDER BY Position";

SqlCeCommand cmd = new SqlCeCommand(sSQL, ceConn);
SqlCeDataReader rdr = cmd.ExecuteReader();
int iFieldCount = 0;

try
{
// Iterate through the results
while (rdr.Read())
{
btn = new Button();
btn.Text = rdr.GetValue(1).ToString();
btn.Name = rdr.GetValue(1).ToString();

btn.Tag = d;
btn.Location = new Point(a, b);
btn.Size = new Size(175, 23);
panel1.Controls.Add(btn);

btn.Click += new EventHandler(btnclick);
pic = new PictureBox();

//pic.Name = rdr.GetValue(0).ToString();
//pic.Location = new Point(205, c);
//pic.Size = new Size(16, 16);
//pic.Image = ((System.Drawing.Image)(pictureBox2.Image)); //resources.GetObject("pictureBox2.Image"); //StartInspection.Properties.Resources.checkmark;
//panel1.Controls.Add(pic);

if (GlobalClass.btntag.ToString() == "")
{
pic = new PictureBox();
pic.Name = rdr.GetValue(0).ToString();
pic.Location = new Point(205, c);
pic.Size = new Size(16, 16);
pic.Image = ((System.Drawing.Image)(pictureBox2.Image)); //resources.GetObject("pictureBox2.Image"); //StartInspection.Properties.Resources.checkmark;
panel1.Controls.Add(pic);
}
else
{
int caseswitch = Convert.ToInt32(GlobalClass.ImageStatus[f]);
switch (caseswitch)
{
case 1:
//MessageBox.Show("case1" + GlobalClass.ImageStatus[f]);

pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox1.Image));//StartInspection.Properties.Resources.checkmark;
pic.Name = rdr.GetValue(0).ToString();

pic.Location = new Point(205, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
GlobalClass.ImgStatus[f] = "Pass";
break;
case 2:
//MessageBox.Show("case2" + GlobalClass.ImageStatus[f]);
//string chkstus = "";

pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox2.Image));//StartInspection.Properties.Resources.xmark;
pic.Name = rdr.GetValue(0).ToString();
pic.Location = new Point(205, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
GlobalClass.ImgStatus[f] = "Fail";
break;
//case 3:
// // MessageBox.Show("case3" + GlobalClass.ImageStatus[f]);
// pic = new PictureBox();
// pic.Image = StartInspection.Properties.Resources.questionmark;
// pic.Name = dr.GetValue(0).ToString();
// pic.Location = new Point(a + 85, c);
// pic.Size = new Size(16, 16);
// this.Controls.Add(pic);
// GlobalClass.ImgStatus[f] = "Not Applicable";
// break;
default:
pic = new PictureBox();
pic.Name = rdr.GetValue(0).ToString();
pic.Location = new Point(205, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
break;
}
}
b = b + 22;
c = c + 22;
d = d + 1;
f = f + 1;

}
}
finally
{
// Always call Close when done reading
rdr.Close();
// Always call Close when done reading
ceConn.Close();
}

}

private void button1_Click(object sender, EventArgs e)
{

}

private void label1_ParentChanged(object sender, EventArgs e)
{

}
private void btnclick(object sender, EventArgs e)
{
Button currentButton = (Button)sender;
GlobalClass.EmpName = currentButton.Name;
GlobalClass.btntag = Convert.ToInt32(currentButton.Tag);
i = GlobalClass.btntag;
ceConn = new SqlCeConnection(CONNECTIONSTRING);
ceConn.Open();
string sSQL = "select QuestionID from QuestionTree WHERE TemplateID = '19' and Title = '" + currentButton.Name + "'";
SqlCeCommand cmd = new SqlCeCommand(sSQL, ceConn);
SqlCeDataReader rdr = cmd.ExecuteReader();
int iFieldCount = 0;
try
{
// Iterate through the results
while (rdr.Read())
{
GlobalClass.QuestionId = Convert.ToInt32(rdr.GetValue(0).ToString());
iFieldCount = iFieldCount + 1;
}
}
finally
{
// Always call Close when done reading
rdr.Close();
// Always call Close when done reading
ceConn.Close();
}
GlobalClass.parent = false;
CatagoryQuestion2 cq2 = new CatagoryQuestion2();
cq2.ShowDialog();
this.Close();
//this.Hide();
}

private void toolBar1_ButtonClick(object sender, ToolBarButtonClickEventArgs e)
{
Select_Inspection_start se = new Select_Inspection_start();
se.ShowDialog();
this.Close();
//Login la = new Login();
//la.ShowDialog();
}
}
}

Question Form

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace AIS_Start
{
public partial class CatagoryQuestion2 : Form
{
string status;
private bool m_sync = true;
public CatagoryQuestion2()
{
InitializeComponent();
}
private const string LOCALDATABASE = "\\My Documents\\AISNEW.sdf";
private const string CONNECTIONSTRING = "data source=" + LOCALDATABASE;//connection string for local database
private SqlCeConnection ceConn = new SqlCeConnection(CONNECTIONSTRING);
int a, b, c, d, i, f, g;
Button btn;
PictureBox pic;
private void label1_ParentChanged(object sender, EventArgs e)
{

}

private void CatagoryQuestion2_Load(object sender, EventArgs e)
{
//this.Text = GlobalClass.QuestionId.ToString();

if (GlobalClass.parent == true)
{
this.Text = GlobalClass.EmpName.ToString();
a = 30;
b = 50;
c = 52;
d = 0;
f = 0;
ceConn.Open();

//this.Text = GlobalClass.QuestionId.ToString();
string sSQL = "SELECT QuestionID, Title, Reference1, Reference2 FROM QuestionTree WHERE ParentId = '" + GlobalClass.QuestionId.ToString() + "' AND TemplateID = '19' ORDER BY Position";
SqlCeCommand cmd = new SqlCeCommand(sSQL, ceConn);
SqlCeDataReader dr1 = cmd.ExecuteReader();
while (dr1.Read())
{
btn = new Button();
btn.Text = dr1.GetValue(1).ToString();
if (btn.Text.StartsWith("Z"))
{
btn.Text =dr1.GetValue(1).ToString()+"*" ;
}
btn.Name = dr1.GetValue(1).ToString();
btn.Tag = d;
btn.Location = new Point(a, b);
btn.Size = new Size(150, 23);
panel1.Controls.Add(btn);
btn.Click += new EventHandler(btnclick);
//------------------------------------
SqlCeConnection ceConn1 = new SqlCeConnection(CONNECTIONSTRING);
ceConn1.Open();
string sSQL1 = "select QuestionID from Standards where QuestionID='" + dr1.GetValue(0).ToString() + "'";
SqlCeCommand cmd1 = new SqlCeCommand(sSQL1, ceConn1);
SqlCeDataReader dr2 = cmd1.ExecuteReader();
while (dr2.Read())
{
string bid = dr2.GetValue(0).ToString();
if (bid == dr1.GetValue(0).ToString())
{
btn.BackColor = Color.Tomato;
}
}
dr2.Close();
ceConn1.Close();
//------------------------------------
//panel1.Controls.Add(pic);
if (GlobalClass.btntagSub.ToString() == "")
{

pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox1.Image));
pic.Name = dr1.GetValue(0).ToString();
pic.Location = new Point(195, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
}
else
{
int caseswitch = Convert.ToInt32(GlobalClass.ImageStatusSub[f]);
switch (caseswitch)
{
case 1:

//MessageBox.Show("case1"+GlobalClass.ImageStatusSub[f]);
pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox2.Image));
pic.Name = dr1.GetValue(0).ToString();
//MessageBox.Show(pic.Name );
pic.Location = new Point(195, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
GlobalClass.ImgStatusSub[f] = "Pass";
break;
case 2:

//MessageBox.Show("case2"+GlobalClass.ImageStatusSub[f]);
pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox3.Image));
pic.Name = dr1.GetValue(0).ToString();
pic.Location = new Point(195, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
GlobalClass.ImgStatusSub[f] = "Fail";
break;
case 3:
//MessageBox.Show("cae3"+GlobalClass.ImageStatusSub[f]);
pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox3.Image));
pic.Name = dr1.GetValue(0).ToString();
pic.Location = new Point(195, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
GlobalClass.ImgStatusSub[f] = "Not Applicable";
break;
default:
pic = new PictureBox();
pic.Name = dr1.GetValue(0).ToString();
pic.Location = new Point(a + 85, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
break;
}
}
b = b + 22;
c = c + 22;
d = d + 1;
f = f + 1;
}
dr1.Close();
ceConn.Close();
}
else if (GlobalClass.parent == false)
{
this.Text = GlobalClass.EmpName.ToString();
int i;
GlobalClass.EmpNameSub = "";
GlobalClass.btntagSub = 0;
GlobalClass.FailSub = "";
for (i = 0; i < 100; i++)
{
GlobalClass.ImgStatusSub[i] = "";
}
for (i = 0; i < 101; i++)
{
GlobalClass.ImageStatusSub[i] = 0;
}
GlobalClass.NotApplSub = "";
GlobalClass.PassSub = "";
GlobalClass.QuestionIdSub = 0;

a = 30;
b = 50;
c = 52;
d = 0;
f = 0;

ceConn = new SqlCeConnection(CONNECTIONSTRING);
ceConn.Open();
string sSQL2 = "SELECT QuestionID, Title, Reference1, Reference2 FROM QuestionTree WHERE ParentId = '" + GlobalClass.QuestionId.ToString() + "' AND TemplateID = '19' ORDER BY Position";
SqlCeCommand cmd1 = new SqlCeCommand(sSQL2, ceConn);
SqlCeDataReader dr1;
dr1= cmd1.ExecuteReader();
while (dr1.Read())
{
btn = new Button();
btn.Text = dr1.GetValue(1).ToString();
if (btn.Text.StartsWith("Z"))
{
btn.Text = dr1.GetValue(1).ToString() + "*";
}
btn.Name = dr1.GetValue(1).ToString();
btn.Tag = d;
btn.Location = new Point(a, b);
btn.Size = new Size(150, 23);
panel1.Controls.Add(btn);
btn.Click += new EventHandler(btnclick);

//------------------------------------

SqlCeConnection ceConn1 = new SqlCeConnection(CONNECTIONSTRING);
ceConn1.Open();
string sSQL3 = "select QuestionID from Standards where QuestionID='" + dr1.GetValue(0).ToString() + "'";
SqlCeCommand cmd2 = new SqlCeCommand(sSQL3, ceConn1);
SqlCeDataReader dr2 = cmd2.ExecuteReader();
while (dr2.Read())
{
string bid = dr2.GetValue(0).ToString();
if (bid == dr1.GetValue(0).ToString())
{
btn.BackColor = Color.Tomato;
}
}
dr2.Close();
ceConn1.Close();
//pic = new PictureBox();
//pic.Image = ((System.Drawing.Image)(pictureBox1.Image));
//pic.Name = dr1.GetValue(0).ToString();
//pic.Location = new Point(195, c);
//pic.Size = new Size(16, 16);
//panel1.Controls.Add(pic);
//------------------------------------
if (GlobalClass.btntagSub.ToString() == "")
{

pic = new PictureBox();
pic.Image = ((System.Drawing.Image)(pictureBox1.Image));
pic.Name = dr1.GetValue(0).ToString();
pic.Location = new Point(195, c);
pic.Size = new Size(16, 16);
panel1.Controls.Add(pic);
}
b = b + 22;
c = c + 22;
d = d + 1;
f = f + 1;
}

dr1.Close();
ceConn.Close();
}

}
private void btnclick(object sender, EventArgs e)
{
if (m_sync)
{
m_sync = false;
try
{
Button currentButton = (Button)sender;
GlobalClass.EmpNameSub = currentButton.Name;
GlobalClass.btntagSub = Convert.ToInt32(currentButton.Tag);
i = GlobalClass.btntagSub;

SqlCeConnection ceConn1 = new SqlCeConnection(CONNECTIONSTRING);
ceConn1.Open();

string sSQL4 = "select QuestionID from QuestionTree WHERE TemplateID = '19' and Title = '" + currentButton.Name + "'";

SqlCeCommand cmd = new SqlCeCommand(sSQL4, ceConn1);
SqlCeDataReader dr = cmd.ExecuteReader();

while (dr.Read())
{
GlobalClass.QuestionIdSub = Convert.ToInt32(dr.GetValue(0).ToString());
}
dr.Close();
ceConn1.Close();

Adverts ad = new Adverts();
ad.ShowDialog();
this.Close();
}
catch (StackOverflowException ex)
{
string msg = ex.Message;
MessageBox.Show(ex.Message);
}
m_sync = true;
}

}

private void button1_Click(object sender, EventArgs e)
{
bool chkst = false;
g = 0;
SqlCeConnection ceConn1 = new SqlCeConnection(CONNECTIONSTRING);
ceConn1.Open();

string sSQL4 = "SELECT QuestionID, Title, Reference1, Reference2 FROM QuestionTree WHERE ParentId = '" + GlobalClass.QuestionId.ToString() + "' AND TemplateID = '19' ORDER BY Position";
SqlCeCommand cmd = new SqlCeCommand(sSQL4, ceConn1);
SqlCeDataReader dr = cmd.ExecuteReader();
GlobalClass.ImageStatus[GlobalClass.btntag] = 1;

while (dr.Read())
{

if (GlobalClass.ImgStatusSub[g].ToString() == "Fail")
{
GlobalClass.ImageStatus[GlobalClass.btntag] = 2;
}
if (GlobalClass.ImgStatusSub[g].ToString() == "")
{
chkst = true;
}
g = g + 1;
}

dr.Close();
ceConn1.Close();
GlobalClass.ImgStatusSub[f] = "";
if (chkst == false)
{

CatgoryQuestion cq = new CatgoryQuestion();
cq.Show();
//this.Hide();
}
else
{
MessageBox.Show("Inspection not done perfectly!");
}

}

private void toolBar1_ButtonClick(object sender, ToolBarButtonClickEventArgs e)
{
//switch (toolBar1.Buttons.IndexOf(e.Button))
//{

// //case 0:
// // this.Close();
// // break;
// //case 1:
// // //MessageBox.Show("Button2");
// // //if (treeView1.SelectedNode.Text == "")
// // //{
// // // MessageBox.Show("Please select an Asset to view details");
// // //}
// // //else
// // //{
// // // GlobalClass.GlobaltvselItem = treeView1.SelectedNode.Text;
// // // Assets_Information frm = new Assets_Information();
// // // frm.Show();
// // //}

// // Assets_Information asset = new Assets_Information();
// // asset.ShowDialog();
// // break;
//}
//CatgoryQuestion frm = new CatgoryQuestion();
//frm.Show();

CatgoryQuestion frm = new CatgoryQuestion();
frm.ShowDialog();
this.Close();
}

}
}

The Global Class

using System;
using System.Collections.Generic;
using System.Text;

namespace AIS_Start
{
static class GlobalClass
{

private static string tvselItem = "";
public static string GlobaltvselItem
{
get
{
return tvselItem;
}
set
{
tvselItem = value;
}
}
private static string type = "";
public static string typeasset
{
get
{
return type;
}
set
{
type = value;
}
}
private static bool inspection = false;
public static bool inspectionstart
{
get
{
return inspection;
}
set
{
inspection = value;
}
}
private static bool sta = false;
public static bool status
{
get
{
return sta;
}
set
{
sta = value;
}
}
private static string stand = "";
public static string standards
{
get
{
return stand;
}
set
{
stand = value;
}
}
private static string desc = "";
public static string description
{
get
{
return desc;
}
set
{
desc = value;
}
}

// Values that will be stored in InspectionResult table for BrakePad Liner Thickness Question when the user presses NA
private static int autoid;
public static int InspeResid
{
get
{
return autoid;
}
set
{
autoid = value;
}
}
private static int thi;
public static int thickness
{
get
{
return thi;
}
set
{
thi = value;
}
}
private static string stat = "";
public static string InspeResStatus
{
get
{
return stat;
}
set
{
stat = value;
}
}
private static string det = "";
public static string InspeResDetails
{
get
{
return det;
}
set
{
det = value;
}
}
// Values that will be stored in the InspectionDefects

private static string defect = "";
public static string defectPrior
{
get
{
return defect;
}
set
{
defect = value;
}
}
private static string abc = "";
public static string AVCode
{
get
{
return abc;
}
set
{
abc = value;
}
}
private static string abc1 = "";
public static string AVGCode
{
get
{
return abc1;
}
set
{
abc1 = value;
}
}
private static string abc2 = "";
public static string ADV
{
get
{
return abc2;
}
set
{
abc2 = value;
}
}
private static string abc3 = "";
public static string CauseGroupCode
{
get
{
return abc3;
}
set
{
abc3 = value;
}
}
private static string abc4 = "";
public static string CauseCode
{
get
{
return abc4;
}
set
{
abc4 = value;
}
}
private static string abc5 = "";
public static string DefaultText
{
get
{
return abc5;
}
set
{
abc5 = value;
}
}
private static string abc6 = "";
public static string CauseText
{
get
{
return abc6;
}
set
{
abc6 = value;
}
}
//Variable declaration to store variable by retriving data from System settings
private static int sbe;
public static int ServiceBrakeEff
{
get
{
return sbe;
}
set
{
sbe = value;
}
}
private static string emi = "";
public static string emiStatus
{
get
{
return emi;
}
set
{
emi = value;
}
}
private static string emid = "";
public static string emiDetail
{
get
{
return emid;
}
set
{
emid = value;
}
}
private static string emid1 = "";
public static string emiDefectText
{
get
{
return emid1;
}
set
{
emid1 = value;
}
}
private static string emid2 = "";
public static string emiCauseText
{
get
{
return emid2;
}
set
{
emid2 = value;
}
}
private static string numq1 = "";
public static string numberQStatus
{
get
{
return numq1;
}
set
{
numq1 = value;
}
}
private static string numq2 = "";
public static string numberQDetail
{
get
{
return numq2;
}
set
{
numq2 = value;
}
}
private static string numq3 = "";
public static string numberQDefectText
{
get
{
return numq3;
}
set
{
numq3 = value;
}
}
private static string numq4 = "";
public static string numberQCauseText
{
get
{
return numq4;
}
set
{
numq4 = value;
}
}
private static string perq1 = "";
public static string percentageStatus
{
get
{
return perq1;
}
set
{
perq1 = value;
}
}
private static string perq2 = "";
public static string percentageDetail
{
get
{
return perq2;
}
set
{
perq2 = value;
}
}
private static string perq3 = "";
public static string percentageDefectText
{
get
{
return perq3;
}
set
{
perq3 = value;
}
}
private static string perq4 = "";
public static string percentageCauseText
{
get
{
return perq4;
}
set
{
perq4 = value;
}
}
private static string trd1 = "";
public static string TreadDefectText
{
get
{
return trd1;
}
set
{
trd1 = value;
}
}
private static string trd2 = "";
public static string TradeCauseText
{
get
{
return trd2;
}
set
{
trd2 = value;
}
}
private static string tp6 = "";
public static string TPaxile //Vehicle Axile type
{
get
{
return tp6;
}
set
{
tp6 = value;
}
}
private static string tp1 = "";
public static string TPVehicleType
{
get
{
return tp1;
}
set
{
tp1 = value;
}
}
private static string tp3 = "";
public static string TPFrontOS //TyrePressure Off Side
{
get
{
return tp3;
}
set
{
tp3 = value;
}
}
//---------------------------------------------------------------
private static string tp4 = "";
public static string TPFrontNSUI //TyrePressure Near Side UI
{
get
{
return tp4;
}
set
{
tp4 = value;
}
}
//-----------------------------------------------------------
private static string tp5 = "";
public static string TPFrontOSUI //TyrePressure Near Side UI
{
get
{
return tp5;
}
set
{
tp5 = value;
}
}
//-----------------------------Centre--------------------------------------
//-----------------------------TyrePressure Question(Front)----------------------------------------------------
private static string tpc2 = "";
public static string TPCNS //TyrePressure Near Side
{
get
{
return tpc2;
}
set
{
tpc2 = value;
}
}
//---------------------------------------------------------------
private static string tpc3 = "";
public static string TPCOS //TyrePressure Off Side
{
get
{
return tpc3;
}
set
{
tpc3 = value;
}
}
//---------------------------------------------------------------
private static string tpc4 = "";
public static string TPCNSUI //TyrePressure Near Side UI
{
get
{
return tpc4;
}
set
{
tpc4 = value;
}
}
//-----------------------------------------------------------
private static string tpc5 = "";
public static string TPCOSUI //TyrePressure Near Side UI
{
get
{
return tpc5;
}
set
{
tpc5 = value;
}
}
private static string tp2 = "";
public static string TPFrontNS //TyrePressure Near Side
{
get
{
return tp2;
}
set
{
tp2 = value;
}
}
//----------------------------------------------------------------------
//-----------------------No of axile------------------------------------
//private static string tp6 = "";
//public static string TPaxile //Vehicle Axile type
//{
// get
// {
// return tp6;
// }
// set
// {
// tp6 = value;
// }
//}
//---------------------------------------------------------------
//---------------------------------------------------------------
private static string tp7 = "";
public static string TPRearInnerNSUI //TyrePressure Inner Near Side UI
{
get
{
return tp7;
}
set
{
tp7 = value;
}
}
//-----------------------------------------------------------
private static string tp8 = "";
public static string TPRearInnerOSUI //TyrePressure Inner Off Side UI
{
get
{
return tp8;
}
set
{
tp8 = value;
}
}
//---------------------------------------------------------------
private static string tp9 = "";
public static string TPRearOuterNSUI //TyrePressure Outer Near Side UI
{
get
{
return tp9;
}
set
{
tp9 = value;
}
}
//-----------------------------------------------------------
private static string tp10 = "";
public static string TPRearOuterOSUI //TyrePressure Outer Off Side UI
{
get
{
return tp10;
}
set
{
tp10 = value;
}
}
//===================================
//-----------------------------TyrePressure Question(Rear)----------------------------------------------------
private static string tp11 = "";
public static string TPRearInnerNS //TyrePressure Inner Near Side
{
get
{
return tp11;
}
set
{
tp11 = value;
}
}
//---------------------------------------------------------------
private static string tp12 = "";
public static string TPRearInnerOS //TyrePressure Inner Off Side
{
get
{
return tp12;
}
set
{
tp12 = value;
}
}
//====================================
//-----------------------------TyrePressure Question(Front)----------------------------------------------------
private static string tp13 = "";
public static string TPRearOuterNS //TyrePressure Inner Near Side
{
get
{
return tp13;
}
set
{
tp13 = value;
}
}
//---------------------------------------------------------------
private static string tp14 = "";
public static string TPRearOuterOS //TyrePressure Inner Off Side
{
get
{
return tp14;
}
set
{
tp14 = value;
}
}//-------------------
//======================================================================
//----------------------------------------------------------------------
//---------------------------------------------------------------
private static string tpc7 = "";
public static string TPCentreInnerNSUI //TyrePressure Inner Near Side UI
{
get
{
return tpc7;
}
set
{
tpc7 = value;
}
}
//-----------------------------------------------------------
private static string tpc8 = "";
public static string TPCentreInnerOSUI //TyrePressure Inner Off Side UI
{
get
{
return tpc8;
}
set
{
tpc8 = value;
}
}
//---------------------------------------------------------------
private static string tpc9 = "";
public static string TPCentreOuterNSUI //TyrePressure Outer Near Side UI
{
get
{
return tpc9;
}
set
{
tpc9 = value;
}
}
//-----------------------------------------------------------
private static string tpc10 = "";
public static string TPCentreOuterOSUI //TyrePressure Outer Off Side UI
{
get
{
return tpc10;
}
set
{
tpc10 = value;
}
}
//===================================
//-----------------------------TyrePressure Question(Rear)----------------------------------------------------
private static string tpc11 = "";
public static string TPCentreInnerNS //TyrePressure Inner Near Side
{
get
{
return tpc11;
}
set
{
tpc11 = value;
}
}
//---------------------------------------------------------------
private static string tpc12 = "";
public static string TPCentreInnerOS //TyrePressure Inner Off Side
{
get
{
return tpc12;
}
set
{
tpc12 = value;
}
}
//====================================
//-----------------------------TyrePressure Question(Front)----------------------------------------------------
private static string tpc13 = "";
public static string TPCentreOuterNS //TyrePressure Inner Near Side
{
get
{
return tpc13;
}
set
{
tpc13 = value;
}
}
//---------------------------------------------------------------
private static string tpc14 = "";
public static string TPCentreOuterOS //TyrePressure Inner Off Side
{
get
{
return tpc14;
}
set
{
tpc14 = value;
}
}
//---------------------------------------------------------------
private static string failcategory = "";
public static string FailureCategory//Used in showing the name of form zAuto Adjuster.cs while form loading.
{
get
{
return failcategory;
}
set
{
failcategory = value;
}
}
// private static string ename = "";
// public static string EmpName
// {
// get
// {
// return ename;
// }
// set
// {
// ename = value;
// }
// }
// private static string pa = "";
// public static string Pass
// {
// get
// {
// return pa;
// }
// set
// {
// pa = value;
// }
// }
// private static string Fa = "";
// public static string Fail
// {
// get
// {
// return Fa;
// }
// set
// {
// Fa = value;
// }
// }
// private static string na = "";
// public static string NotAppl
// {
// get
// {
// return na;
// }
// set
// {
// na = value;
// }
// }
// ///

// /// ////////////
// /// question parent id
private static string Question = "";
public static string QuestionID
{
get
{
return Question;
}
set
{
Question = value;
}
}
//------------------question id1
private static string Question1 = "";
public static string QuesID
{
get
{
return Question1;
}
set
{
Question1 = value;
}
}
////------------question type
// /// question parent id
private static string Questiontyp = "";
public static string QuestionType
{
get
{
return Questiontyp;
}
set
{
Questiontyp = value;
}
}
// ///

// ///
// private static int[] imgSta = new int[10];
// public static int[] ImageStatus
// {
// get
// {
// return imgSta;
// }
// set
// {
// imgSta = value;
// }
// }
// private static int abcbtn;
// public static int btntag
// {
// get
// {
// return abcbtn;
// }
// set
// {
// abcbtn = value;
// }
// }
// private static string[] empname = new string[10];
// public static string[] employeename
// {
// get
// {
// return empname;
// }
// set
// {
// empname = value;
// }
// }
// private static string[] img = new string[10];
// public static string[] ImgStatus
// {
// get
// {
// return img;
// }
// set
// {
// img = value;
// }
// }
private static string ename = "";
public static string EmpName
{
get
{
return ename;
}
set
{
ename = value;
}
}
private static string pa = "";
public static string Pass
{
get
{
return pa;
}
set
{
pa = value;
}
}
private static string Fa = "";
public static string Fail
{
get
{
return Fa;
}
set
{
Fa = value;
}
}
private static string na = "";
public static string NotAppl
{
get
{
return na;
}
set
{
na = value;
}
}
private static int[] imgSta = new int[201];
public static int[] ImageStatus
{
get
{
return imgSta;
}
set
{
imgSta = value;
}
}
//private static int abc;
//public static int btntag
//{
// get
// {
// return abc;
// }
// set
// {
// abc = value;
// }
//}
////private static string[] empname = new string[100];
//public static string[] employeename
//{
// get
// {
// return empname;
// }
// set
// {
// empname = value;
// }
//}
private static string[] img = new string[200];
public static string[] ImgStatus
{
get
{
return img;
}
set
{
img = value;
}
}
private static int qid;
public static int QuestionId
{
get
{
return qid;
}
set
{
qid = value;
}
}
//--------------------------For Sub Question------------------------------------
private static string enameSub = "";
public static string EmpNameSub
{
get
{
return enameSub;
}
set
{
enameSub = value;
}
}
private static string paSub = "";
public static string PassSub
{
get
{
return paSub;
}
set
{
paSub = value;
}
}
private static string FaSub = "";
public static string FailSub
{
get
{
return FaSub;
}
set
{
FaSub = value;
}
}
private static string naSub = "";
public static string NotApplSub
{
get
{
return naSub;
}
set
{
naSub = value;
}
}
private static int[] imgStaSub = new int[201];
public static int[] ImageStatusSub
{
get
{
return imgStaSub;
}
set
{
imgStaSub = value;
}
}
private static int abcSub;
public static int btntagSub
{
get
{
return abcSub;
}
set
{
abcSub = value;
}
}

private static string[] imgSub = new string[200];
public static string[] ImgStatusSub
{
get
{
return imgSub;
}
set
{
imgSub = value;
}
}
private static int qidSub;
public static int QuestionIdSub
{
get
{
return qidSub;
}
set
{
qidSub = value;
}
}
private static bool paren;
public static bool parent
{
get
{
return paren;
}
set
{
paren = value;
}
}
private static int btnabc;
public static int btntag
{
get
{
return btnabc;
}
set
{
btnabc = value;
}
}
//---------------------FaultLocation for Positional Screen---------------------------------
private static string fl = "";
public static string faultLocation
{
get
{
return fl;
}
set
{
fl = value;
}
}
//---------------------Variables for Positional Screen---------------------------------
private static string psp = "";
public static string PSposition
{
get
{
return psp;
}
set
{
psp = value;
}
}
//---------------------Variables for Positional Screen---------------------------------
private static string psd = "";
public static string PSdetail
{
get
{
return psd;
}
set
{
psd = value;
}
}
//---------------------Variables for Positional Screen---------------------------------
private static string psi = "";
public static string PSitemno
{
get
{
return psi;
}
set
{
psi = value;
}
}
//--------------------------------------------------------------------------------------

}
}

Please help me in this. I am helpless. Any help will be appriciated.

Sagar Pattnayak
Software Developer
Sun-Dew Solutions
+91-9831169962

Hi,

I'm new to mobile development. I was wondering if it were possible to access the phone functions on a Windows Mobile 2003. I was thinking more of an application which is able to obtain the cell id, bcch etc, like the parameters available in a Satgem phone. Which programming language would be able to obtain these parameters if possible? I am learning C# currently, would it be possible to do this through the APIs?

Thank you.

Hello everyone,

I am building a DLL using embedded VC 4. There is a .exp file generated into the same folder of the output DLL file.

I am wondering what is the usage of this file? How to control embedded VC not to generate this file?

thanks in advance,
George

Hello everyone,

I am building a DLL using embedded VC 4. When building a DLL (written in C) for platform MIPSFPU, there is a strange link error.

fatal error LNK1112: module machine type 'MIPS' conflicts with target machine type 'MIPSFPU'

Here is the link option I am using. I am wondering what is wrong with the settings?

commctrl.lib coredll.lib /nologo /base:"0x00100000" /stack:0x10000,0x1000 /entry:"_DllMainCRTStartup" /dll /incremental:yes /pdb:"MIPSIVRel/recover.pdb" /debug /nodefaultlib:"$(CENoDefaultLib)" /out:"MIPSIVRel/recover.dll" /implib:"MIPSIVRel/recover.lib" /subsystem:$(CESubsystem) /MACHINE:MIPSFPU

thanks in advance,
George

Under wince, how to get window hanlde of other process which is activing. I mean our application is not the activing one for the moment. AttachThreadInput seems unavailable under wince. How could it do? Confused | :confused:

One day a pretty girl asked me:"Do u think you are handsome?" "I don't think so!".She gave a slap in my face:"Why lying?"...

I am working on a project that will require the user to send a message and a PIN to an sms center then gets a message related to the PIN sent from th sms center.... how can i do this using the vb.net environment and MSSQL2000. Thanks Confused | :confused:

cxheun

Dear All
Please help in this ,it is very crtical and very urgent.I am using SQL
Client in Vb.net Compact Framework 2.0 to connect SQL Server 2000.It is
working fine with English collation (SQL_LATIN1_General) but same code gives
error with Arabic collation.
Error was Plattform not supported Exception and SQL error number is 5.
IF i try to connect with Server name i am getting error as SQL Exception.
Please help me out to solve this.
Thanks & Regards
Peer

hi

Hi,

I've not done any mobile coding before so am unsure how to do this. Basically, I'm writing a program in C# and running it in VS2005 under the emulator.

When the emulator shows up, it doesn't display my form I've created, it waits around 1min and then it suddenly appears. I want to make it so it displays instantly, or if anyone knows how to do this which would be a much better way, is to add it to the "Programs" list on the smart device, since i will need to deploy it onto a device and not use the emulator when the project is completed.

Any ideas, like i said, I've only been playing around figuring out how to do the basics, e.g: display something!

Regards,
Gareth.

don't worry gare,
when you run your application,it takes less time.you can feel this thing by running other program of real device & your program. Both takes approx same time.but within your application if your data loading time is too much then you can try following statement.
Cursor.Current = Cursors.WaitCursor
above statement change your default cursor to wait cursor.
and after loading data, change your wait cursor to default cursor using following statement
Cursor.Current = Cursors.Default

hope this helps

Rupesh Kumar Swami
Software Engineer,
Integrated Solution,
Bikaner (India)

My Company

Hi Rupesh,

I already know how to change the cursor so no, it doesn't really answer my question. Sorry.
The problem is, i don't have any control on loading the program, it just appears, also if i click close, i cant re-open it. Thats why i asked if anyone knew how to add it to the "Programs" list or another method.

Regards,
Gareth.

The startup time might be an emulator issue which goes away when deployed on the actual device. First the emulator has to load and start, then it needs to run your application. Even running on the actual device, there is a start-up time to sync up with the IDE environment when connected. Just something you live with.

The program is likely defaulted to download into the root directory on the emulator/device.

You can copy a shortcut to your application into the Windows\Start Menu\Programs folder.

You can do this automatically by using a CAB file to install your application on the target device. See linky.

Gary