|
What does your report do? Does it contain a table object that displays a set of tabular data? In that case, add a footer section to your table object, put your textbox in the table footer and set the footer to repeat on every page via the table properties.
Paul
|
|
|
|
|
i am looking for a general solution, the report may contain a table object or a list to display the data thats not a prob. Adding textbox on the footer to display the sum and making it repeat on every page will not solve the problem, bcos the final total will be displayed on each page and not the individual page total. i'm not really sure if its possible to achieve this without using the page footer....i hope there is a change in the requirement 
|
|
|
|
|
i am developing an application in ASP.net,i am using the following sql query, but in SQL Server "criminal" table i want the same record to be inserted, so can anyone tell me how to merge the two queries in one query so that only one row is inserted
strQuery = "INSERT INTO criminal(cr_name,no_times,cr_desc,cr_pic,fing_print)VALUES('" + textBox1.Text + "','" + textBox5.Text + "','" + textBox4.Text + "','" + textBox6.Text + "','" + textBox7.Text + "')";
strQuery = "INSERT INTO criminal(pic_name) SELECT substring(cr_pic,11,30) FROM criminal";
|
|
|
|
|
Try this
strQuery = "INSERT INTO criminal(cr_name,no_times,cr_desc,cr_pic,fing_print,pic_name)VALUES('" + textBox1.Text + "','" + textBox5.Text + "','" + textBox4.Text + "','" + textBox6.Text + "','" + textBox7.Text + "','" + substring(textBox6.Text,11,30)+"')";
|
|
|
|
|
i had tried the same query but the following error comes
Error 14 The name 'substring' does not exist in the current context C:\Documents and Settings\mehwish\My Documents\Visual Studio 2005\Projects\rescue15\new_wanted_criminal_record.cs 654 230 rescue15
|
|
|
|
|
Check if this works out
strQuery = "INSERT INTO criminal(cr_name,no_times,cr_desc,cr_pic,fing_print,pic_name)VALUES('" + textBox1.Text + "','" + textBox5.Text + "','" + textBox4.Text + "','" + textBox6.Text + "','" + textBox7.Text + "','" + textBox6.Text.Substring(11,30) +"')";
|
|
|
|
|
again error comes. Error is
ArgumentOutOfrangeException was unhandled
Index and length must refer to a location within the string.
Parameter name: length
what do i do
|
|
|
|
|
you are getting that error bcos the length that u are specifying is greater than the no of the characters in the string. make sure that you are specifying the right parameters in order to extract the name for the pic...try this
strQuery = "INSERT INTO criminal(cr_name,no_times,cr_desc,cr_pic,fing_print,pic_name)VALUES('" + textBox1.Text + "','" + textBox5.Text + "','" + textBox4.Text + "','" + textBox6.Text + "','" + textBox7.Text + "','" + textBox6.Text.Substring(11,textBox6.Text.Length-11) +"')";
i am assuming that the cr_pic name starts from the 11th position and u want it till the end. if you are still having a problem the post the format in which you are specifying the cr_pic
|
|
|
|
|
thank you this is really working, can u suggest the solution for one more problem
string strQuery = "";
openFileDialog1.ShowDialog();
string s = openFileDialog1.FileName;
textBox6.Text = s;
string st = "Pict" + Guid.NewGuid().ToString() + ".jpg";
File.Copy(openFileDialog1.FileName, Path.Combine(@"c:\inetpub\wwwroot\15 website\images", st));
strQuery = "INSERT INTO criminal(pic_name) VALUES(System.IO.Path.GetFileName(openFileDialog1.FileName))";
PROBLEM:
error comes on this the SQL Query , am i inserting rightly?
|
|
|
|
|
ya mavii
u have tried to fetch the char in the string at
the position outside the string
Use the "IndexOf" fun keeping in
mind that it starts from 0 and end at Length-1.
Regards
_________
Piyus Gupta
|
|
|
|
|
Pardon me if i'm missunderstood,
but those two queries is tend to insert different value to the table, so what is the reason you should merge them into one query??
maybe you could execute only one query by your application code , such as
if xxx = "true" then
strQuery = "INSERT INTO criminal(cr_name,no_times,cr_desc,cr_pic,fing_print)VALUES('" + textBox1.Text + "','" + textBox5.Text + "','" + textBox4.Text + "','" + textBox6.Text + "','" + textBox7.Text + "')";
else
strQuery = "INSERT INTO criminal(pic_name) SELECT substring(cr_pic,11,30) FROM criminal";
end if
|
|
|
|
|
i cant apply if because i want to insert one record which includes the columns in both queries, actually i want some solution to insert cr_name,no_times,cr_desc,cr_pic,fing_print,pic_name
using one query not two separate SQL quries
i want one row to be inserted
|
|
|
|
|
1 - try reading the post on how to ask questions
2 - try using parameterised queries, so you're not open to injecton attacks
3 - try using real variable names, so your code is readable
What was the question ?
The most logical way I can see to do this, is to drop a column which always contains a substring of a value in another column, that's just duplicaton of data. Work out the pic name from the path in code, or write a proc that returns it as seperate data, but based entirely on the one column that contains all the data you need.
OR, a yucky way to do it that would at least work, would be to store the Id of the column in question, and then update ony that, instead of doing an insert, which is obviously not what you want.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
STRQRY="INSERT INTO criminal
SELECT '" + textBox1.Text + "','" + textBox5.Text + "','" + textBox4.Text + "','" + textBox6.Text + "','" + textBox7.Text + "'
substring(cr_pic,11,30) FROM criminal
"
|
|
|
|
|
Other people have already answered the questions for you but I feel the need to weigh in on your architecture a little bit.
1. You really shouldn't rely on the default names that you get in Visual Studio. Consider renaming textBox1, et al, to more meaningful names.
2. Don't create direct SQL strings like this. This is bad bad practice which should be avoided at all costs because you have opened your code up to SQL Injection attacks. See this[^] article for more information.
3. Consider moving your data access logic into a separate data access layer (DAL).
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Hi all, this is my first post here.
I want to know if there is any chance to create a report using SQL 2005 Report Service to mimic the Data-Auto Filter tool in Ms Excel. In this case, i want to create in matrix report.Let's say I have a dataset using this query :
select p.Proj_ID, p.Division_ID, p.Division_Desc, p.Department_ID,
p.Department_Desc, p.Type
from project p
left join Mill m on p.mill = m.org_area
I have create a matric report, with
P.Type in Row Area,
Division_Desc in Column area and below Division_Desc I have group base on Departemen_Desc.
Proj_ID in Data Area.
I want to create something like combo box in the report column header to choose witch Division to shown.
Is there any possible way to create such thing?
Thanx for any information.
|
|
|
|
|
i want to read XML file from sql server 2005. Is there any stored procedure that can read xml file data and store the values in table?
|
|
|
|
|
I have datas from base sql 2000
example
what I get from base
id b1 b2 b3 b4 b5
1 10 11 21 35 39
2 03 18 33 39 45
3 14 17 25 31 44
what I need through VBcode
1 0 1 1 5 9
2 3 8 3 9 5
3 4 7 5 1 4
how do I get this
thanks
jaakinye
|
|
|
|
|
|
I am having trouble with 3 delete queries in my c# application(Win Mobile database)and MSVS 2005, two other Delete queries run fine. All the Delete queries run fine on Win XP, just not in Vista(Vista's User Account Control off). Here is the simple query
DELETE FROM [tableName] I get error SQL Execution error 3640. I get this error whether I am debugging in msvs2005, or running in the Query Designer or if I just run the application outside of msvs2005.
I posted this in C# but someone mentioned that it might be better posted here.
I can get a Delete Query to work if i use the key columns like
DELETE FROM Horse
WHERE (CODE = @p1) AND (Stable = @p2) AND (HorseName = @p3)
this one is not really useful to me though since I am trying to delete all rows no matter the value in these columns.
Hope someone has an idea.
If not is there any other way I can delete all rows from a data table?
I didn't quite understand how to use TRUNCAT TABLE in the Query Designer in MSVS 2005.
If anyone will accept the database tables to see if they get teh same error I will be happy to send them to you.
Thank you
Jon Stroh
Thank You
Jon Stroh
|
|
|
|
|
THERE IS PHP PROJECT IN WHICH A SMALL CHANGE IS RQUIRED for a PHP coding.those who can able to do the coding please contact me in 9884112963or mail me at haarishg@yahoo.co.in asap
-- modified at 14:16 Tuesday 18th September, 2007
|
|
|
|
|
The forums is not the place for this. Post this stuff on the Jobs Board[^].
|
|
|
|
|
Please stop posting stuff like this. Try RentACoder.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
greetings everyody,
When building an application that utilises a databases such as SQL Server or Sybase SQL Anywhere one can use stored procedures to manipulate the database. For example, I use the follwing bit of code in my DataAccess class:
SACommand cmd = new DataAccessor(m_connectionString).GetCommand("[OrderDetails.UpdateInventory]");
cmd.Parameters.Add(new SAParameter("@Quantity",Quantity));
cmd.Parameters.Add(new SAParameter("@ProductID", ProductID));
cmd.Parameters.Add(new SAParameter("@DistributorID", DistributorID));
cmd.Parameters.Add(new SAParameter("@InventoryReceiptHeaderID", ReceiptID));
cmd.Parameters.Add(new SAParameter("@OrderID", OrderID));
cmd.Parameters.Add(new SAParameter("@DeliveryNote", DeliveryNote));
cmd.Parameters.Add(new SAParameter("@UserID", UserID));
cmd.ExecuteNonQuery();
Problem is MS Access does not have stored procedures.
Now, im trying to avoid typing SQL statements directly in my code. Im hoping to use queries in my MS Access databse which i pass parameters to etc
How can i achieve the same in MS Access 2000/2003 database?
|
|
|
|
|
pete007_ke wrote: Now, im trying to avoid typing SQL statements directly in my code. Im hoping to use queries in my MS Access databse which i pass parameters to etc
How can i achieve the same in MS Access 2000/2003 database?
I have never tried this before, but I'm assuming it could work. In your Access database, you could write your "stored procedures" in VBA. Having your functions stored in the database, I'm pretty sure you could call those functions and get their returns.
I get all the news I need from the weather report - Paul Simon (from "The Only Living Boy in New York")
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
