|
Can any one please give example code on how you can access the database of sqlserver or Oracle from mobile using msync for example but using Embedded c++ EVC3,4.
this will help me as well as you.
thanks
modified on Thursday, February 28, 2008 12:55 AM
|
|
|
|
|
sharkassam wrote: Can any one please give example code on how you can access the database of sqlserver or Oracle from mobile using msync for example but using Embedded c++ EVC3,4.
There is tons of "sample code" on the net. Why don't you search for it yourself, instead of asking others to do it.
I'm going to become rich when I create a device that allows me to punch people in the face over the internet.
"If an Indian asked a programming question in the forest, would it still be urgent?" - John Simmons / outlaw programmer
|
|
|
|
|
Oh. Well, I haven't tried doing any of the stuff you listed in the .NET CF with Access. So, I can't say whether or not the items you listed are totally true. However, I will assume they are. If the PC with the Access tables is on the same network as your Pocket PC when committing to that Access "database," you can create a share on the folder that the file is in, and give full read/write permissions on the folder, and the file.
Then, ADO.NET still works in the CF, you can use an OleConnection, and OleCommands to do reads and writes to that file. Are you using the office interop to do your access work, or are you using OLE? I don't even know if the office interop is CF compatible.
I'm not sure if I helped at all, or answered any questions. However, if you have any more, please feel free to ask here, and I'll do the best I can at answering, and giving advice.
I'm going to become rich when I create a device that allows me to punch people in the face over the internet.
"If an Indian asked a programming question in the forest, would it still be urgent?" - John Simmons / outlaw programmer
|
|
|
|
|
Hi,
I've installed both the Windows Mobile 6.0 Standard and Professional SDKs with VS2008 on my laptop. I'm trying to run the Cellular Emulator tool, but every time I try I get the error "COM7 is in use, please verify".
I used the Device Manager to see what ports are in use and it only lists COM1, my serial port. When I go to it's properties and click on the Port Settings tab, then the Advanced... button there is a place where I can pick what com port to use. This list shows that com ports 3-17 are all in use, but I have no idea by what.
I've tried looking this up on the internet and found a lot of people with a similar problem (with a different com port), but no real solution. This forum[^] says that Windows Mobile 6 uses 14 com ports for device emulation. That's fine, but then why can't I use COM7 if it's already reserved?
Any help with this would be greatly appreciated. I don't have bluetooth software installed.
Thank you,
Brad
"You know you're a geek when... You try to shoo a fly away from the monitor with your cursor. That just happened to me. It was scary." — Juuso Heimonen.
|
|
|
|
|
Hi
How do I download a file in my c# program?
I am trying to download an exe file from a webserver to a local directory at my PDA.
I have tried to use the WebClient class from c# .NET but it seems that it doesn't exists in Compact Framework.
Can anyone please help me to solve this?
|
|
|
|
|
Hello,
Yes, the WebClient class is not implemented in CF. You can use the HttpWebRequest/FileWebRequest, or mainly the WebRequest class.
Check the MSDN reference for more information on these classes.
Regards,
Dave
Dave Traister
Software Engineer
ComponentOne LLC
www.ComponentOne.com
|
|
|
|
|
The FileWebrequest does not seem to be in the Compact Framework either.
Or should I add a reference or something?
|
|
|
|
|
Hello,
Sorry about that. Yes, FileWebrequest is not available in CF. However you can use the HttpWebRequest or WebRequestclass to achieve the desired.
Regards,
Dave
Dave Traister
Software Engineer
ComponentOne LLC
www.ComponentOne.com
|
|
|
|
|
Thanks a lot  My problem is solved..
|
|
|
|
|
Need Help to get an exmaple of how to connect to Oracle database or Sql Server from the Mobile using MSync.
If any one done it before please send me your avaialable code
Thanks In Advance.
modified on Thursday, February 28, 2008 12:48 AM
|
|
|
|
|
Can we install Windows CE in normal computer having lower configuration?
|
|
|
|
|
why double posting? [^]
He died when he was alive.
|
|
|
|
|
There is a new UI freeware available for WM5 and WM6. This UI, called PointUI is a thumb enabled UI that makes your WM phone much easier to use.
I am a WM device developer, and this UI inspired my next project. I am thinking to use an interface just like PointUI (i.e. without all the windows buttons, scrollbars)
I am not too experience in this fashion as I have only programed using windows forms in WM devices. What would be a good choice to start with if I want to program in .NET? Would directdraw be a good choice?
|
|
|
|
|
Hi,
I am currently trying to code a C program that will allow my PC to use the mobile phone to connect to the Internet.
I am able to connect to the mobile phone DUN service using the Bluetooth profile.
But how do I use PPP to work with the Bluetooth DUN connection that I have set up?
Any advice to point me in the right direction or resources is deeply appreciated.
Thanks and regards,
Loh
|
|
|
|
|
Hi Everyone! I want a help from you all.
The situation is:
I am having an Intermec ck31 wince4.2 powered mobile device.Now i want to write a client socket for the device which will then communicate to the server which is a unix pc.
The problem is that when i am writing the socket client part in my device and checking the communication between a server simulator which is on my xp pc It works fine but when it comes for the unix system it is shown connected but no messages can be sent or received in between the unix pc and the device.
Please help me I am totally exhausted.
I am using visual studio 2005 (c#.net) for writing the program. 
Thanks In advance please reply me soon !!
|
|
|
|
|
Hello,
Is the Unix machine you are trying to connect to on the network?
Are you able to transfer data to and fro from the machine in a windows application?
Is there by any chance a firewall in between which can be blocking the communication?
Regards,
Dave
Dave Traister
Software Engineer
ComponentOne LLC
www.ComponentOne.com
|
|
|
|
|
Hello All,
I want to change the first boot image for my Pocket PC Phone. when system boots up, initially a image is displayed followed by a power on GIF file (power_on.gif) followed by the window startup screen.
I want to change the first image which is displayed on mobile. Let me know how to change it?
Thanks
BlrBoy
|
|
|
|
|
Hi all
I am new to WAP applications (Mobile Applications in .net)
can u ppl plz tell me how can i create wap applications
i am able to create web applications in asp.net (Mobile applications)
but how can i convert to WAP
Thx in advance
Keerthi
|
|
|
|
|
Hello every one ... 
i have a project that is dealing with PDA phone and the main objective is streaming live video using PDA camera ...
so its like this :
i will recoard a video using PDA's cam and sreaming it to a server ....
what i want is :
is there any code out that may help to bulid an application to open the cam and start recording ??
PlZ guide with any thing you have ...
Thank You For Your Help
|
|
|
|
|
Hello,
If you have installed the Windows Mobile 5.0 Pocket PC SDK, you have the sample showing the same on your machine. The location for the samples would be:
C:\Program Files\Windows CE Tools\wce500\Windows Mobile 5.0 Pocket PC SDK\Samples\Cs\Cecamera
To download the Mobile 5.0 PPC SDK, use the link below:
http://www.microsoft.com/downloads/details.aspx?familyid=83A52AF2-F524-4EC5-9155-717CBE5D25ED&displaylang=en
Can also refer to the following link with tell of the different APIs used:
http://msdn2.microsoft.com/en-us/library/ms880615.aspx
Regards,
Dave
Dave Traister
Software Engineer
ComponentOne LLC
www.ComponentOne.com
|
|
|
|
|
thanx sir for your replying ...
where i can find that file in Windeows Mobile 6
Regards,
Y.S.A
|
|
|
|
|
Hello,
I do not see the Cecamera sample in the Windows Mobile 6.0 SDK. You may refer the sample from the Windows 5.0 SDK to develop your own application for Windows Mobile 6.0.
Regards,
Dave
Dave Traister
Software Engineer
ComponentOne LLC
www.ComponentOne.com
|
|
|
|
|
how can i draw a string in .net cf inside a menu
in the menu click event
how can i call the OnPaint() in menu click event
modified on Saturday, February 16, 2008 3:32 AM
|
|
|
|
|
Hi Guy
i think u can't directlly call that method. so try a custom menu inherit from the menu anmd override the Onpaint event with a ur own method and call to with in the event. So try directlly, if not get success try with ur custom menu.
Cheers,Earn and Enjoy
RRave
MCTS,MCPD
|
|
|
|
|
Is there a way to uniquely identify a Windows Mobile 5.0 device? I am using web services to sync data and I want to be able to identify which device is being synced so I can send only the needed data.
I'm assuming each Windows Mobile installation has a guid. Does anybody know?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
