|
You've pretty much summed it up with point 1. Some other things to consider:
As a business owner, retention and continuity are important to me. If I have a key system developed in language X (running on Operating System Y) then it's absolutely vital that I can continue to have this system supported if the original developer leaves.
I can't target staff training if there are so many different environments in use. It would be next to impossible to prioritise training.
You can't have a long term strategic view if your environments are in complete chaos.
|
|
|
|
|
Pick the correct language or tool for the job. When all you have is a hammer everything starts to look like a nail. If all you are writing is business software then it is an easy decision to force support into one language, one platform, and one skill set. However, if you have a mix of embedded systems, web based systems, weather simulators, and natural language processors VB.NET would be a hard sell.
Need software developed? Offering C# development all over the United States, ERL GLOBAL, Inc is the only call you will have to make.
If you don't ask questions the answers won't stand in your way.
Most of this sig is for Google, not ego.
|
|
|
|
|
Sorry I forgot to mention that. Yes, most of what our division does is developing business desktop and web applications for in-house use. So there is no embedded system development, weather simulator (not sure what is involved anyway), or natural language processors.
|
|
|
|
|
With respect to Weather Simulations I was just trying to pick something that required a massively parallel supercomputer and that was all I could think of.
Need software developed? Offering C# development all over the United States, ERL GLOBAL, Inc is the only call you will have to make.
If you don't ask questions the answers won't stand in your way.
Most of this sig is for Google, not ego.
|
|
|
|
|
Hello,
I am new to this forum and I am a student.My problem is that, I created a MDI Parent application which is suppose to be accessed through login form,I used following code for login to the mdi parent
if (usertxtbox.Text.Equals("admin") && passtxtbox.Text.Equals("admin"))
{
MDIForm1 f1 = new MDIForm1();
f1.Show();
this.Close();
}
else
{
MessageBox.Show("Login Failed");
}
but when I run the application it and insert the correct info the application closes.
After that I thought of hiding the login form instead of closing it by changing
this.Close() to this.Hide() and it worked .
But I had problem when I tried to close the MDI Form using the close button[X] of the form on the top,the form closed but the application was still running in background.
What can I do to solve the problem?
I think I am suppose to implement Threads but how i don't know .
Sorry if I am unable to explain properly,Since its my first time.
Please! Can anyone like to help me.
|
|
|
|
|
Instead of starting the UI thread on login form, use for example MDI parent form as your startup form. When MDI parent starts, launch login and check if it's ok.
Also you can do this in your main class. First use login form, if it's ok, then start UI message loop on MDI parent using System.Windows.Forms.Application.Run(...)
|
|
|
|
|
The common way to do this is to show the form before you call Application.Run, then open up the form. This might end up looking like:
public static void Main()
{
using (LoginDialog dlg = new LoginDialog())
{
if (dlg.ShowDialog() == DialogResult.OK)
{
if (dlg.IsValidLogin)
{
Application.Run(new MDIForm1());
}
else
{
MessageBox.Show("Login failed");
}
}
}
}
|
|
|
|
|
Hello I am coding a data transfer class for my project, in which I am transfering a file peer to peer from one machine to another. Im sending data through sockets and network stream. After syaing that here is my problem, on the client side i have a thread that reads the file converts it to bits and write it to the network stream. On the server side i have another thread listing for incomming connections. when a data transfer command comes it runs a method used to read the data from the network stream. The problem is that sometimes the client dosent have enought time to write the whole file to the stream beacuse the server immedeatly starts reading from the network stream and this is resulting in data being corruted.
My temp solution was to include the following code "Thread.sleep(5000)" before the RecieveData method so the server waits 5 seconds before attempting to read from the stream. This worked but I noticed that if the file size increases dramaticaly 5 seconds is not enough time for the client to write to the stream, is there any mathematical solution that i can use or any other way to maybe work out this problem. Thank you guys
|
|
|
|
|
You shouldn't need to worry about if the server has transferred some or all of the file before beginning your reading. What class and function are you using to receive data, and how are you calling it?
|
|
|
|
|
Hello, to recieve the data i am first waiting for the client to wrie all the data into the stream and then the server connects the network stream to the incoming socket and reads the data. Below i have pasted the code where the server is downloading the data from the client.
if (clientsocket != null)
{
//Retrieve Stream from the socket that is connected to the client machine
NetworkStream incomingNetworkStream = new NetworkStream(clientsocket);
//Output Stream which will be used to store the incoming file onto the machine's HDD
FileStream fsout = new FileStream(parser.TemporaryFilesPath + @"\database.zip", FileMode.OpenOrCreate, FileAccess.Write);
long size = Convert.ToInt64(incomigFileSize);
long rdby = 0;
int len = 0;
if (incomingNetworkStream.DataAvailable)
{
while (rdby < size)
{
//buffer to store a portion of the incoming file
byte[] buffer = new byte[1024];
len = incomingNetworkStream.Read(buffer, 0, buffer.Length);
fsout.Write(buffer, 0, buffer.Length);
rdby = rdby + len;
}
fsout.Flush();
fsout.Close();
isReading = false;
}
else
{
}
byte[] datatosend = Encoding.ASCII.GetBytes("TransferCompleet");
serverSendSocket.Send(datatosend, datatosend.Length, 0);
}
The problem is that sometimes the data isnt read correctly and i think because the client pc is not finsihed writing to the stream when the server starts reading from the stream.
|
|
|
|
|
Ah, I think I might see the issue.
The Read function is a little funny on streams. It only guarantees that you will get some data back, but not how much. You are doing the right thing by checking the return value of Read and incrementing len - forgetting to do this is actually a common mistake you see in real-life programs.
When you are writing to your file, you need to only write how much data you read.
Say your read function reads in 500 bytes...
Notice the line
fsout.Write(buffer, 0, buffer.Length);
Even though you only read 500 bytes, you're writing out 1024 (buffer.Length)! You need to only write out to the file however much you read in. Fix that line, and I'll bet your program works without the need for doing thread sleeps.
|
|
|
|
|
Thank you m8 what was good help  .
|
|
|
|
|
Yes, don't call BeginReceive again until you are finished with the data returned, or if you do provide a different offset.
Need software developed? Offering C# development all over the United States, ERL GLOBAL, Inc is the only call you will have to make.
If you don't ask questions the answers won't stand in your way.
Most of this sig is for Google, not ego.
|
|
|
|
|
hi every one,
I'm trying to connect to a database in SQL server 2005 from a c# application. My goal is to use SQL Authentication using a user id and a password. My problem is in sql server side where I'm trying to work with logins, users, roles, schemas, etc.
Further more is it possible to deploy the applicatin with sqlExpress so that no one could access the database except for the application using it?
thnx
|
|
|
|
|
If SQLExpress is installed on the machine, I don't see how unless you consistently encrypt the database.. You can control decrypting through your application to decrypt records on the fly but that might be slightly inefficient depending on what you are doing. Check into obfuscation for a broad range to start securing your code, and .Net has a lot of encryption related classes so you can learn how to store your data on a database to prevent people from snooping.
|
|
|
|
|
Hi guys, I am wondering if there is a way to add a RadioButtonList inside the Listview control. Currently, my Listview checkboxlist is behaving like a radio button. But I want to change its look so its UI looks appealing.
Thanks
|
|
|
|
|
I dont think what you want is easily done, would have to be with some paint event coding.
The best thing would prob be a custom control, wouldnt be too hard for your requirements
My opinion is... If someone has already posted an answer, dont post the SAME answer
|
|
|
|
|
Check out the RadioButtonRenderer class
|
|
|
|
|
Hi all,
Could you please help me how to access a database from the following config file(web config).
<configuration>
<sqlserver>SERVER_BMRD</sqlserver>
<sqldatabase>B</sqldatabase>
<sqluser>BD_user</sqluser>
<sqlpassword>^1^vtqhCBOwbVJc+ODAe2Sm7A==</sqlpassword>
<sqltrusted>False</sqltrusted>
</configuration>
How will i be able to connect to the above database?
For example :
SqlDataAdapter sda = new SqlDataAdapter("Stored_procedure", Connectionstring);
Can you give me how my connection string should look like?
Thank you so much
|
|
|
|
|
|
Thanks for your response Rob.
It was given to me as a database credentials to be able to connect to the database.
You can see that they dont use connection string ?so that is my problem
How can i connect to a database using those credentials?
Regards,
kibrom
modified on Monday, February 9, 2009 12:23 PM
|
|
|
|
|
OK, to my knowledge that won't be easy. Config files have to follow a certain format, and you define sections when you want to implement your own settings. Just placing individual bits in there like that will likely cause the ConfigurationManager to protest.
Your app.config file is invalid. As such, the best bet would be to bypass the ConfigurationManager altogether and process the file as any other xml file. One such way would be to use an XmlDocument and retrieve the settings using XPath.
Regards,
Rob Philpott.
|
|
|
|
|
Hi Rob ,
Thank you so much for your help.Sorry as i am new to this could you please give me a tip on how to use it with XMLReader or XMlDocument?
Thanks a lot.
|
|
|
|
|
Sure. I'm just about to leave work now, so I'll put something together in a couple of hours once home. A few things to check - this file is called web.config and resides in the usual place with your application?
Also, you absolutely cannot change the format of this file? A simple inclusion of appSettings would make this a breeze.
I'd create a class which reads this file and then exposes each setting you need as a public string property. If I remember correctly the ASP.NET world watches web.config and updates automatically - you wouldn't get that with this approach.
More later...
Regards,
Rob Philpott.
|
|
|
|
|
Hi Rob,
Your help is Much appreciated Rob.Yes please its a config file.But its not a webconfig file.For instance the above can be called admin.config file.
The file doesnt have app setting? we can still include appSettings.However they dont have it in this file.
Thanks again for your time.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
