|
Are you sure it's not a reporting error? You could try and run SiSoft Sandra, and see if your performance is as expected with your hardware.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
It could be... I have thought about that possibility but the system does seem slightly sluggish and the benchmark tests that windows runs to determine the windows experience score return quite a low result.
I'll look into the SiSoft Sandra thing when I get back home tonight.
Man who stand on hill with mouth open wait long time for roast duck to drop in
|
|
|
|
|
Is this happening at full load, or only at idle?
It is a truth universally acknowledged that a zombie in possession of brains must be in want of more brains.
-- Pride and Prejudice and Zombies
|
|
|
|
|
dan neely wrote: Is this happening at full load, or only at idle?
Good question. No idea.
I used the AMD Cpu tool to report speed and it came back as Current: 1.6GHz, MaxSpeed: Unfused. No idea what "unfused" means.
Man who stand on hill with mouth open wait long time for roast duck to drop in
|
|
|
|
|
Install prime95 and do a stress test. Then check your cpu speed.
I suspect your CPU is fine. For power saving reasons any CPU from the last few years underclocks itself when idle.
It is a truth universally acknowledged that a zombie in possession of brains must be in want of more brains.
-- Pride and Prejudice and Zombies
|
|
|
|
|
Check that the power scheme is Balanced or Max Perf. If it's Power Saver, the CPU will be underclocked. (I don't think this is the cause, actually, since the default should be Balanced and desktops don't get the tray icon that lets you change schemes, but it's all I can think of)
|
|
|
|
|
Power Scheme was set to Balanced. I set it to Max yesterday but to no avail.
Man who stand on hill with mouth open wait long time for roast duck to drop in
|
|
|
|
|
I set the BIOS up manually, but using all the settings it had auto-detected. Windows and the AMD Processor utility now report the CPU speed as what I would expect.
However, it did not alter my Windows Experience scores after I re-ran the test. And a processor stress test only ran about 10% faster than the previous run, despite the processor now running at twice the speed.
Man who stand on hill with mouth open wait long time for roast duck to drop in
|
|
|
|
|
Did you compare? You need ANY processor "grading" tool that can compare with online lists of similar computers. SiSoft Sandra just sprang to my mind, but PC-Mark or others might work just as well.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Hi friends,
I need to know how to remove virus from the Computer without using Antivirus Software.
If you know the Answer. Please Reply
Bye,
![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif)
Victory is Sweetest when you have Known Defeat
|
|
|
|
|
Can you you a webbased AV tool, or is that unacceptable for the same reason you can't do it the normal way?
If not, you'll have to search for a removal guide for the specific virus you've got. www.google.commay be of assistance.
It is a truth universally acknowledged that a zombie in possession of brains must be in want of more brains.
-- Pride and Prejudice and Zombies
|
|
|
|
|
Check the name of virus from online scanning tool. Most antivirus provider provide such service. Then, download removal tool/Fix tool and scan. Cost=$0
|
|
|
|
|
 I need to use a webcam for a project where I need to control cam's internal parameters. I know that I can find in the market cameras with some API's, like logitech.
For the other side I know I can do something with DShow and Windows Driver Development kit.
Someone can tell me what is the better way to begin with this project, I mean which tools are more convenient to use and if you know some appropiate camera with Api's or SDKs, that makes more easy and reliable this implementation, the application must be implemented in c++ -- THANKS IN ADVANCE !
|
|
|
|
|
Dear All,
Please give a solution to cut the paper when i print..
i m using thermal printer.
For print,i send a string to print
|
|
|
|
|
I don't think C# is sharp enough to cut paper.
If your printer can cut paper, there must be some command to make it do so. I would try sending an ASCII formfeed; then read the documentation.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
i want Same thing Any one can help me
|
|
|
|
|
Hi.
I just bought a Vaio VGN-AR890U Laptop.
It's OK. but there is a problem !
It has 4GB Ram , But its default OS is Vista 32bit that doesn't support 4GB Ram. To use 4GB Ram we have to install Vista 64bit.
So I'm looking for Windows Vista 64bit drivers for VGN-AR890U.
The official support web site ,is for American Laptops
http://esupport.sony.com/US/perl/model-home.pl?mdl=VGN-AR890U®ion_id=1[^]
My laptop made in China, So I can't use them 
Could you guide me how I can install a Windows Vista 64 bit ?
Many thanks in advance
|
|
|
|
|
 we have 2 laptop but this laptops are when playing radio voice is one of them come first other laptop playing same voice 10 second after what is the problem what can I do?
|
|
|
|
|
Do the laptops have TV tuners?
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
If you're listening to a radio station stream over the Internet, there's nothing you can do about it.
|
|
|
|
|
PLEASE LET ME KNOW IF ANYONE OUT THERE HAS AN APPLICATION TO CONTROL 4 OR MORE SERVO'S FROM A PARALLEL PORT. I AM LOOKING FOR SOMETHING LIKE THIS APP, WHERE A JOYSTICK COULD BE USED, BUT OPTIONAL : http://www.hvlabs.com/serservo.html[^]
Please let me know A.S.A.P. if anyone has any app , like this, http://users.swing.be/philippe.jadin/servoen.htm[^]  because this file is corrupt, it pops up about 30 times with a window saying Privilaged Instruction.
|
|
|
|
|
I voted you down because writing ALL CAPS OVER EXTENDED PERIODS OF TIME is considered "shouting" on the net.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Do you have an answerto my question Sebastian ?
I will keep the caps to a min.
Please let me know, i did not know about the caps thing.
|
|
|
|
|
ROVIO wrote: file is corrupt, it pops up about 30 times with a window saying Privilaged Instruction.
The file is not corrupt. Although I am not a Delphi/Pascal software engineer... I downloaded the source code at the URL you provided and viewed the source code. The instructions which are privileged are located in this function:
procedure outvalue(value : smallint);
begin
asm
mov dx,0378h
mov ax,value
out dx,al
mov dx,037ah
mov al,00000001b
out dx,al
mov dx,037ah
mov al,00000000b
out dx,al
end;
end;
The assembly instructions are performing raw port I/O which are indeed privileged. You can probably get this software to work by giving it permission to read/write raw I/O ports in protected mode. I would suggest using PortTalk - A Windows NT I/O Port Device Driver[^] to give this application the correct permission mask.
Best Wishes,
-David Delaune
|
|
|
|
|
Good day
Thanks for your post.
I have found an easier way to fix this app.
If you right click the application file, then go to properties, then click on the compatibility tab, click on the Run this program in compatibility mode tickbox, then select Windows 98 / Windows Me and click ok.This fixes the app to be used in XP.
If anyone knows of an better app to control more than 4 servos, directly connected(No hardware eg. servo motor controlers or any other electronic components)to the 8 data lines of the Parallel port please let me know.
Thanks again.
Riaan Deyzel
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
