|
i think somebody is messing around to your computer...
syntax error
|
|
|
|
|
i think it has disable in bios itself bro after that accidently u had applied any default setting or any changes made by u just remember that
|
|
|
|
|
No, I didn't make any change to the BIOS of the computer.
|
|
|
|
|
Yes I think so. But this computer is not my computer. It was my boss computer. And he has admin right when he logon to the computer.
|
|
|
|
|
Dear all,
I have the following issue. (Am using windows vista Buisness 32 bit)
- Lets say ia mapped a network drive. Finished whatever to be done and i disconnected the mapped drive. When i again right click on My Computer -> Map Network drive, i can still find the previouse address of mapped drive in the drop down list. ex: \\192.168.88.4\drive
My question is how to remove, or delete or to make the pc never remember the address next time i wana map a drive?
Best regards,
0 will always beats the 1.
|
|
|
|
|
I've got a network setup with ISA server included. From the DNS/DHCP/ISA box (same box) I can ping the other virtual machine and I can ping the real machine that it is on. I can't ping the other machines and the other machines can't ping them. Same thing for wireless connections. Add to that that it seems that the dhcp is not working on those machines, its giving me a timeout as opposed to an unreachable.
config as follows:
(vm)
ISA ---- Switch ----- Wireless Router ---- Laptops
| | |
DB | Dev
(vm)| (real)
|
SVN
(real)
Suggestions? Any questions?
If the post was helpful, please vote, eh!
Current activities:
Book: Devils by Fyodor Dostoyevsky
Project: Hospital Automation, final stage
Learning: Image analysis, LINQ
Now and forever, defiant to the end.
What is Multiple Sclerosis[ ^]?
|
|
|
|
|
Some VM-Setups have a local-connection type, which limits access from a virtual machine to the real machine its running on. It will also create a seperate LAN-Entry on the real machines networking to enable communication between the two of them.
Since your problem is that you can ping the VM from the host and the host from the VM, DHCP on the host only works on the host and VM, this could be your source of problems.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Thanks Sebastian, but I managed to resolve the issue. It didn't occur to me at first to check whether the switch itself was faulty. Connecting any computer to the server proved it was, and thus another lesson in life is learned! 
If in doubt of pinging across a network, don't forget to test the switch!
However, what you said sounds plausible. I wouldn't personally know since I'm more of a communications (protocol) guy as opposed to a networking guy!
If the post was helpful, please vote, eh!
Current activities:
Book: Devils by Fyodor Dostoyevsky
Project: Hospital Automation, final stage
Learning: Image analysis, LINQ
Now and forever, defiant to the end.
What is Multiple Sclerosis[ ^]?
|
|
|
|
|
Hi There
Just wondering if you guys can help me.
I'm trying to set up VPN at home through my W2k3 server, but cant seem to get past the username and password authentication. The server does not appear to respond at this point.
Any idea's why this may be?
The users I'm trying are set to allow vpn connections etc on the server, and I have port 1723 open on my router and pointing to my server (I've tried it on both network cards)
Any idea's? I cant determin if the problem is client or server side as it does get to the authentication bit... Are there any secret settings in the connection properties I should be setting?
Thanks
oooo, the Jedi's will feel this one....
modified on Thursday, July 30, 2009 5:49 AM
|
|
|
|
|
I have a PC running Vista. Now I'd like to install Windows Server 2003 on the 2nd hard disk and create a dual boot. I can set BIOS to boot from either disk, but I don't want to re-install Vista completely.
Has anyone done this way? Any suggestion is welcome.
Best,
Jun
|
|
|
|
|
|
Hi, does anyone know what is the difference between WSUS server and the cache content of Microsoft Windows Update in ISA 2004? Currently my organization already has ISA 2004 and I don't want to duplicate update of each machine. So could i used the feature cache content of Microsoft Windows Update in ISA 2004 instead of deploy WSUS?
Thank,
|
|
|
|
|
We have a shared project that is used in many solutions we have under MS Visual Source Safe 2005.
This project has a reference to a third party component that we all have installed on our machines, located in the directory C:\Program Files\Some Third Party Component\Something.DLL
Now, since we all have the shared project and the referenced DLL located in the same places on each of our machines, life is good.
Now along comes the 64 bit world. A new development machine running a 64 bit operating system doesn't have a C:\Program Files\ folder containing the necessary 32 bit components, it has a C:\Program files (x86)\ folder.
So either the 32 bit machines can check in the reference that works for them, or the 64 bit machine can check in the reference that works for it. Either way, someone is unable compile the latest version.
This is also an issue for things located in C:\Windows\System32 and C:\Windows\SysWow64
One solution we have currently is to manually create and populate the (x86) folders and SysWow64 folders on 32 bit machines, which is working, I guess, but... gak.
Has anyone else run into this fun yet?
How did you deal with it?
Is there a best practice here?
|
|
|
|
|
hi Jack
Well i never came across the problem, just that it had my boss very angry when i wanted a file and he checkeditout somewhere in his system. am using vs2005/2008 and sql 2005 and i had no problems lately , i think i had a lot of problems with sourcesafe that i can master it and its bugs. The SS pluggin in VS sometimes it gets buggy. just make a backup of your work as a zip file so that your work will not be lost.
Vuyiswa Maseko,
Few companies that installed computers to reduce the employment of clerks have realized their expectations.... They now need more and more expensive clerks even though they call them "Developers" or "Programmers."
C#/VB.NET/ASP.NET/SQL7/2000/2005/2008
http://www.vuyiswamaseko.somee.com
http://www.vuyiswamaseko.tiyaneProperties.co.za
vuyiswa@its.co.za
http://www.itsabacus.co.za/itsabacus/
|
|
|
|
|
I'm strictly a developer and 90% is asp.net development. My boss is making me maintain our server and i have no clue what to do. I did find an article[^] but it seems pretty generalized. Could i have some recommendations on some books that really dig down into administrating ASP.NET on IIS
Thanks,
Don't be overcome by evil, but overcome evil with good
|
|
|
|
|
|
|
hi ,
i want date format in sqlserver 2005 like this january 25,2009 like every month if any body knows tell me.....
urgent....
Reagards
D.V.Mallikarjun
|
|
|
|
|
Hi, my client computer join to the domain controller but sometime when I logon to the computer successfully, my desktop and task bar and everything on the screen won't appear. To solve this, I press control alt delete again and log off and logon to the computer again they the icon and task bar will appear.
It is not a big problem but its really make my client disturb their work. Does anyone know what is the cause of this problem and how to solve it?
Thank in advance!!!
|
|
|
|
|
Hi, I have configure a user logon script from the domain controller and also run the gpupdate /force command in order to update the policy. There are two drive that I mapped in the script (drive T: and drive Z .
The problem is sometime when the user logon to the computer, they didn't see the mapped drive at all until they restart the machine again. Or sometime they see only one mapped drive (drive T: or drive Z and some user could see both (that is no problem).
From here could anyone please let me know what is the likely cause of the problem?
Thank in advacne!!!
|
|
|
|
|
It's more likely that your login script is erroring out somewhere for some reason. Without the script being rewritten to provide logging information, you really have no information to go on.
|
|
|
|
|
I already test the script manually and found it working fine. There is no error during the script run. It seem that the GPO refreshment is not working well when the user is logon to Windows.
|
|
|
|
|
Yeah, it's probably going to work if you run it manually. What I'm saying is that, somehow, somehwere, the script is failing when it is run during logon. You're going to have to go through the script and put in some intrumentation code to log what's going on to a file so you can figure out where its failing.
|
|
|
|
|
|
Gajendra Sharma wrote: Now, the loopback address can be anything in 127. net
Actually the loopback address is not limited to the 127 subnet, a loopback adaptor can be set to any address.
Gajendra Sharma wrote: How do i know what is the exact loopback IP address configured on my machine.
Your question is not very well formed and you left out quite a few details.
1.) What operating system? Linux? Windows Server? XP? Vista?
2.) Are you looking for commandline tools such as NetSh[^]?
3.) Are you looking for a programming solution or commandline?
Best Wishes,
-David Delaune
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
