|
Hi All,
I am creating control at runtime. so these are overlapping and hiding.
So i want to use Send to Back or Bring to Front for it.
So Please give me idea for implimenting it.
Thanks
If you can think then I Can.
|
|
|
|
|
You'll probably want the BringToFront and SendToBack methods
Between the idea
And the reality
Between the motion
And the act
Falls the Shadow
|
|
|
|
|
Is there something like zindex?
google for that.
Coding C#
www.excitetemplate.com
|
|
|
|
|
Thanks Sir
If you can think then I Can.
|
|
|
|
|
A question I should have probably wondered about a little earlier, but anyway:
Let's say I dim an object, for example a dataset, fill that object with data, and use the object, but do not explicitly clear/empty it after use. Then reuse it like:
MyObject = New Object
Will that automatically clear/empty the data from it, that I filled it with earlier? Or does this depend on the object?
Perhaps the important question here is: what is best practice? Can I get problems by not explicitly clearing/emptying an object before reusing it?
My advice is free, and you may get what you paid for.
|
|
|
|
|
Hi,
assuming VB.NET, if you do
[1] Dim MyObject As Object
[2] MyObject = New Object ' object 1
[3] MyObject = New Object ' object 2
then object 1 will become collectible when line [3] executes, meaning the garbage collector will collect object 1 the next time it runs (normally it runs when a future memory allocation cannot be satisfied without cleaning up memory first).
And this is fine, unless it is a type that implements Dispose or Close, as in:
[1] Dim MyObject As Font
[2] MyObject = New Font(...) ' object 1
[4] MyObject = New Font(...) ' object 2
now you should insert [3] MyObject.Dispose() to make sure the unmanaged resources that might be held by the object get released right away (or the file or stream or whatever gets closed).
If you don't Close/Dispose objects that support it, your app will use more memory and other system resources, and its behavior may deteriorate. Yes, the garbage collector will still find those objects, and its finalizer thread will eventually Dispose of them, but that typically will be much later.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Hi Luc,
Thanks, that is really good to know. So far I just assumed that once I reused the object, it would automatically also dispose of the first object and all related data.
So from your explanation, can I surmise that it would be good practise to change my current code (simplified) from:
Dim ds As DataSet = Nothing
ds = New DataSet("DataSet1")
'Run a query and fill the dataset here
'Run some loops, and do some stuff to the data
ds = New DataSet("DataSet1")
'Run another query and fill the dataset here
'Run some loops, and do some stuff to the data
to
Dim ds As DataSet = Nothing
ds = New DataSet("DataSet1")
'Run a query and fill the dataset here
'Run some loops, and do some stuff to the data
ds.Clear() 'Would this even be necessary ?
ds.Dispose()
ds = New DataSet("DataSet1")
'Run another query and fill the dataset here
'Run some loops, and do some stuff to the data
In other words, my app would at least use less resources while it is running?
Cheers,
Johan
My advice is free, and you may get what you paid for.
|
|
|
|
|
Calling Dispose()/Close() when done with an object that has such method is good.
Calling Clear() or Flush() or ... typically doesn't change a thing when immediately followed by Dispose/Close.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Alright, great !
Thanks a bundle for the enlightenment
My advice is free, and you may get what you paid for.
|
|
|
|
|
you're welcome.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Hi,
I have tabcontrol with 5 pages. On some action I want to bring page 3 to the front..
thanks
|
|
|
|
|
Forgive any syntax errors in this, I'm doing it from memory, but something like:
myTabControl.SelectedTab = myTabControl.TabPages(2);
[Edit]
changed indexing from [] to (). Forgot I was in the VB forum. 
Anyway Lucs' solution, below, is better more concise.
[/Edit]
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
modified on Thursday, August 13, 2009 5:54 PM
|
|
|
|
|
or...
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Yup.
I don't use the TabControl often, and had forgotten that, If I ever knew it!
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
myTabControl.SelectedIndex=2;
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
I have a DVD with 15,000 word documents (transcribed op reports from doctors).
I need to organize them by date modified into folders, year first, then a month subdirectory.
The filenames have a date string in them after a patient name.
i.e.: smith john -20060415.doc
I'm wondering if it would be easier to use the fileinfo feature to pull the modified date, and then utilize that to make a folder for the month, then drop that in a folder.
I dont have any code yet, I'm in more of a brainstorming mode, but we will have to do this for a few hundred other accounts we have and need to have a working solution for this issue.
Excuse the pseudo-code, but here's my general idea.
I'd just like some guidance as to what commands I should use in this situation
-scan dir for files *.doc
-for loop
-get modified date of file
-does month folder exist
y=copy file
n=create folder
-copy file
next
Am I on the right track?
Thanks for any response, even if its "you're in the wrong forum" =)
-STL
|
|
|
|
|
The logic is pretty basic, but works. But, I'd do some sanity checking first. If you have the date information in the filename, Id start by parsing that out and comparing it to the Modified date on the file. If the two aren't within some arbitrary limit, I'd set the file aside for further review of where it should go, otherwise, I'd follow the logic you already have.
|
|
|
|
|
Thanks! Now to get it out before friday... 
|
|
|
|
|
You're on the right track; you just need to expand on your pseudocode. Perhaps something like this:
-scan for *.doc files
-for each doc file
--get modified data
--create full path from concatenated data
--does directory exist?
---no: create it
--move file to directory
-end for each
Between the idea
And the reality
Between the motion
And the act
Falls the Shadow
|
|
|
|
|
are you sure you want to categorize by date? That would make retrieval difficult if all you know is patient name or patient number.
How about dividing the lot you have now in folders according to say the first two or three characters of the current filename (so "smith john -20060415.doc" would end up in "sm" or "smi"). That would potentially lead to a few hundred or thousand folders. These folders would vary in the number of files they contain much more than your scheme, however this scheme would keep patient information for a single patient in a single folder, which any date based scheme does not.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Yes, it needs to be by date. The center that is requesting the archive DVD uses our software to pull the files from our SQL DB. The program they use has a listing of job numbers, and of the files, and other information, but we do not allow them remote access to them as they are from 2003-2006, and our cutoff is 01-01-2007.
They will be able to search the disk for the files using windows search, and we have yet to come up with a standard naming convention, so our office manager (not too tech savy) wants them in folders by year, 2003; 2004; 2005...etc and then by month.
So I'm just going with what he wants, but moving and creating folders for 15000 files is too time consuming, so I just need an app to do it for me.
between u, me, and the fencepost, I dont care how they use the disk, I just need to job done. lol.
I appreciate everyone's input. I'll be working on this tonight to get it out in tomorrow's End of Day, so stay tuned as I might need help with the code. ty all!
|
|
|
|
|
OK. I'll keep first watch.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
modified on Thursday, August 13, 2009 4:12 PM
|
|
|
|
|
smith john -19850615.txt
just to see if the code would work...
now when I hit open on the open file dialog, it just sits there.
<br />
Imports System.IO<br />
Public Class Form1<br />
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click<br />
OpenFileDialog1.ShowDialog()<br />
<br />
End Sub<br />
<br />
Private Sub OpenFileDialog1_FileOk(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles OpenFileDialog1.FileOk<br />
Dim oldpath As String<br />
Dim length As Integer<br />
Dim year As String<br />
Dim month As String<br />
Dim newpath As String<br />
Dim start As Int32 'start of year in string<br />
Dim start2 As Int32 'start of month in string<br />
Dim start3 As Int32 'start of filename in string<br />
Dim newpathfull As String<br />
<br />
For Each S As String In OpenFileDialog1.FileNames<br />
'oldpath = S<br />
'gets length of filename<br />
length = S.Length<br />
'Pulls year from last 12 digits of filename<br />
start = length - 12<br />
year = S.Substring(start, 4)<br />
'Pulls the month from the filename<br />
start3 = length - 8<br />
start2 = S.LastIndexOf("\")<br />
month = S.Substring(start3, 2)<br />
newpath = "C:\PP\"<br />
newpathfull = year & "\" & month & "\" & S.Substring(start2 + 1)<br />
'checks for directory, if not there then creates it.<br />
If (Directory.Exists(newpath)) Then<br />
System.IO.File.Copy(S, newpath)<br />
Else<br />
System.IO.Directory.CreateDirectory(newpath & year)<br />
System.IO.Directory.CreateDirectory(newpath & year & month)<br />
End If<br />
Next<br />
<br />
<br />
<br />
End Sub<br />
End Class<br />
|
|
|
|
|
I deserve a raise...
<br />
<br />
Imports System.IO<br />
Public Class Form1<br />
<br />
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click<br />
OpenFileDialog1.ShowDialog()<br />
<br />
<br />
End Sub<br />
<br />
<br />
Private Sub OpenFileDialog1_FileOk(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles OpenFileDialog1.FileOk<br />
<br />
Dim oldpath As String<br />
<br />
<br />
For Each S As String In OpenFileDialog1.FileNames<br />
Dim length As Integer<br />
Dim yearpath As String<br />
<br />
Dim monthpath As String<br />
Dim newpath As String<br />
Dim start As Int32 'start of yearpath in string<br />
Dim start2 As Int32 'start of monthpath in string<br />
Dim start3 As Int32 'start of filename in string<br />
Dim newpathfull As String<br />
<br />
Threading.Thread.Sleep(100)<br />
<br />
'gets length of filename<br />
length = S.Length<br />
'Pulls yearpath from last 12 digits of filename<br />
start = length - 12<br />
yearpath = S.Substring(start, 4)<br />
'Pulls the monthpath from the filename<br />
start3 = length - 8<br />
start2 = S.LastIndexOf("\")<br />
monthpath = S.Substring(start3, 2)<br />
'new destination path<br />
newpath = S.Substring(0, 3) & yearpath & "\" & monthpath & "\"<br />
newpathfull = newpath & S.Substring((start2 + 1))<br />
'checks for directory, if not there then creates it.<br />
If (Directory.Exists(newpath)) Then<br />
System.IO.File.Copy(S, newpathfull)<br />
Else<br />
System.IO.Directory.CreateDirectory(newpath)<br />
System.IO.File.Copy(S, newpathfull)<br />
End If<br />
<br />
Next<br />
<br />
<br />
<br />
<br />
<br />
End Sub<br />
End Class<br />
<br />
Thanks everyone for all your help!
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
