|
You have to have admin privs to open a physical drive or volume. Since you don't have admin privs by default in Vista, you get an access denied error opening \\.\C:
--Mike--
Dunder-Mifflin, this is Pam
|
|
|
|
|
Michael Dunn wrote: You have to have admin privs to open a physical drive or volume
Hmm. Does one get Admin Privs when running in Safe Mode? If so, that would explain why everything works as advertised in Safe Mode.
Amazingly I found no difficulty opening the Physical Drive. The program fails because I try to open the Logical Drive in order to find out what physical drive it is mounted on.
Is there anything I can do with lpSecurityDescriptor, so that the operation acts as if the user has admin privileges. After all, I can open and display the drive from Windows Explorer, without having Admin Privs.
Failing that, is there a way of setting things up to get the thing to start up in Admin mode by default. In the home edition at least, it just seems to start up without asking for logon and password.
Thanks and Regards, 
Bram van Kampen
|
|
|
|
|
|
Well, turning off UAC shouldn't be the first thing you do, since it disables the major security feature in Vista. The proper solution is to have the relevant code run elevated. You can a) mark the executable as requiring admin privs using a manifest, or b) move the license-checking code into a COM object, compile that into a separate DLL, and request elevation when you create the COM object.
--Mike--
Dunder-Mifflin, this is Pam
|
|
|
|
|
Hi,
Sorry for the delay.
I see your point vividly, but switching UAC off leaves the user no worse off than when using XP. Also, NONE of the computers on which the software is running is connected to the internet. However, in the medium term, the use of a manifest would be the better option.
I've spent till now trying to investigate what form such manifest should take. Got no further on this though. Any suggestions, or maybe you have a 'template' I could use.
Regards,
Bram van Kampen
|
|
|
|
|
I've not tried this specifically for a logical drive, but I used a similar license enforcement scheme using a combination of other hardware serial numbers using WMI (Windows Management Instrumentation) and it appears to work correctly on 2000, XP, Vista, etc...
Maybe try:
"Win32_LogicalDisk","VolumeSerialNumber"
|
|
|
|
|
Hello people!
I am pondering into the unknown (by me) here so i am not sure if what i am asking now actually makes sense or not, but i though i ask anyways, maybe some of you can give me an answer.
So, importing a class from a DLL, i have seen that you can use __declspec(dllimport) to be able to use a class implemented in a DLL, something like:
class __declspec(dllimport) CImportClass
{
...method and variable declarations
};I supose on the other end of the world, the DLL exports this class somehow. So, my question would be, can i import this class into my program "as a differently named class". I mean, the DLL exports CImportClass, but in my program i want to import it as COtherImportClass. Would i be able to import this class multiple times with different names too, CFirstImportClass and CSecondImportClass, both having the same implementation of CImportClass sitting in the DLL? Sounds ugly, i know.
Thanks in advance for any answers, folks!
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
No, cannot be done.
The whole Import-Export Mechanism relies on the consistency of the'Mangled' Names being identical in the app where you call the imported function or oject, and the DLL which exports same. Matt Pietreck has several excelent articles on how dynamic linking works. Read them, and you understand why.
From what you describe, I guess that you are trying to do something that would be more appropriately done by derriving several classes in your app, from the baseclass in your DLL.
Regards,
Bram van Kampen
|
|
|
|
|
Thanks!
Thought i try to explain what i thought of doing. I am writing a DLL and when i tried to use std::basic_string in it i got two unresolved external symbols, _String_base::Xlen and _String_base::Xran. I googled around quite a bit and found out some usefull things, however, the possible solutions i found (reorder the include directories e.g.) either did not make any difference or i did not like them. Mostly people hit this when migrating a project from VS2003 to VS2005 and up, however, i am simply writing a program (not migrating anything) in VS2003 and chanhing to a different VS version is not an option right now.
So, what i have found out is that the problem is caused by mismatching calling conventions. The header file (xstring.h i believe) declares the 2 methods as __thiscall, that is, they are two member methods of __Basic_string, however, the library or DLL (am not sure which here) exports these as static, __stdcall methods, thus, they "can't find each other". So i thought, i could maybe implement the __thiscall versions in my code and in them call the __stdcall versions and live happily ever after. But how i would gain access to the __stdcall versions i don't know, if i could have tricked the system by importing the class with a different name from the DLL (since __Basic_string is already declared i can't use that, and i do not wish to modify xstring.h since that would be ugly at least) i could have declared in this class the __stdcall versions and then call them from the __thiscall versions.
Now i am wondering if i could write a lib file i can link to which imports the right class from the DLL (with the __stdcall versions), exposes two methods for Xran and Xlen (which call their static class member counterparts) and then in my program i could call these in the implementations of the __thiscall versions.
There might be a very simple solution for this which i have simply missed or do not (yet) have enough knowledge (as i said, exporting/importing classes in DLLs is still new to me) to realize and i am re-inventing the wheel.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
Code-o-mat wrote: So, what i have found out is that the problem is caused by mismatching calling conventions. The header file (xstring.h i believe) declares the 2 methods as __thiscall, that is, they are two member methods of __Basic_string, however, the library or DLL (am not sure which here) exports these as static, __stdcall methods, thus, they "can't find each other"
There is something seriously wrong here if the declaration in the header does not match the implementation in the DLL. Do you have the correct header, are you linking with the correct DLL, are the correct manifest constants defined. As this are standard items provided by Microsoft and used by millions of people, it is unlikely that something is amiss with the code persee. See if there is a static definition of the function in the header, and find out which conditional manifests are required to compile them.
regards,
Bram van Kampen
|
|
|
|
|
Youd didnt tell the aim of that wired idea?
Press F1 for help or google it.
Greetings from Germany
|
|
|
|
|
Actually i did, here[^], but never mind anymore, it turned out later that it was actually a "user error", meaning, i wasn't linking to the right library, stupid me, sometimes one "can't see the woods because of the trees"  But thanks anyways.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <
|
|
|
|
|
Hello,
My current method of hooking a api function is overwriting (while keeping the old instructions) the start of the function with a jmp instruction and a relative address.
Now I have a question about how to handle cases where the relative jump is larger than 2GB of address.
If I understand correctly this can only happen in 64bit system, right?
So I can test it by:
QWORD *my_address = (QWORD *) &myfunction;
QWORD *original_address = (QWORD *) &orignalfunction;
QWORD jump = my_address - original_address;
if (my_address > original_address && my_address - original_address > 2GB) ||
(original_address > my_address && original_address - my_address) {
//use a 64bit relative jump
}
else {
//use a 32bit relative jump
}
Will this method work on both 64bit and 32bit system/operating systems?
What instruction can use for the above 2gb case? (64bit systems)?
|
|
|
|
|
Well,
I take it that you are fully familiar with Intel I86 assembler code. You must use a 64 bit Jump (jmp64)instruction to jump more than 2GB, which is larger than, and has a different opcode to, the 32 bit equivalent. At the Target of the Jmp, you must replicate all code you overwrote with your jmp64 instruction, and jump back to the first usable opcode after the Jmp64. That can require a bit of doing, in particular if your jmp64 overwrites conditional branches.
BTW I have not yet seen code which exceeds 2 GB. Undoubtedly though, MS will produce something of this size in the future. At least when that happens, you are prepared.
regards,
Bram van Kampen
|
|
|
|
|
Hi
I am using the following createfile function to open a file in network share.
HANDLE file = CreateFile(
File,
GENERIC_READ ,
FILE_SHARE_READ,
0,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
0
);
When the file name is \\10.195.1.54\Temp\expample.ini file it is giving error 5.
But when i input the network share name instead of ip like \\Extream\Temp\expample.ini it is opening.
can you please help me what is the problem i am having?
Birajendu
SonicWALL
Bangalore
India
|
|
|
|
|
the system GetLastError API often can tell you about error details especially when you also try to retrieve the rror code and tranlate it into readable text. Use the following snippget of code and tell us what is the message you receive. That case you may be even be able to understand the pbm yourself.
std::string GetFormattedSystemError()
{
LPVOID lpMsgBuf;
LPVOID lpDisplayBuf;
DWORD dw = GetLastError();
FormatMessageA(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM |
FORMAT_MESSAGE_IGNORE_INSERTS,
NULL,
dw,
MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
(LPTSTR) &lpMsgBuf,
0, NULL );
char* pMessage = (char*) lpMsgBuf;
return std::string(pMessage);
}
Good luck.
Easy Profiler : a compile-time profiler for C++
www.potatosoftware.com
|
|
|
|
|
birajendu wrote: When the file name is \\10.195.1.54\Temp\expample.ini file it is giving error 5.
Which equates to ERROR_ACCESS_DENIED. Are you sure that the Extream server has an IP address of 10.195.1.54?
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
Yes i am sure about that.cause i can open that loaction through exploler using \\10.195.1.54\temp.
it is not about the perticular extreme server in my Corporate lan. This happens with all PC prsent in Lan, If i try thru the name of the system than it works fine , but though IP it does not work.... No idea why?
I gave a another try.I connected two PC to a router. So here i got IP from router.There is no scenario of DNS here, so i tried trough IP only(some thing like \\192.168.1.2\temp\emaple.ini) and worked perfactly.
SO i am confused where is the problem?
Birajendu
SonicWALL
Bangalore
India
|
|
|
|
|
I've found that calling GdiplusStartup() before CWinThread::Run is called will not work so I have been putting my logic that ensures GdiplusStartup() is called once per app instance in the CDocument constructor.
This worked fine if I only used GDI+ in the CView related code. However, I now have a need to use it as soon as possible during the application initialization.
Does anyone know of a good spot to initialize GDI+ during the application or thread initialization stages?
|
|
|
|
|
When designing CWinApp based applications I always put it in the CWinApp derived constructor.
Best Wishes,
-David Delaune
|
|
|
|
|
Hmmm, there must have been some issue with when to call this in Visual C++ 6.0 using the Platform SDK because I remember it wasn't that easy in those days. I remember trying to call it in various places in the CWinApp derived class but I ended up with some odd errors back then so I got it in my head that I needed to time it properly to avoid conflicts.
I guess this is no longer a problem so I apologize for the question.
thanks for the help.
|
|
|
|
|
This appears to work at first, but if I try to use an open file verb on a data file, I get a "Windows cannot find file (some file path)" error.
This does not happen if I initialize GDI+ later in the process.
NOTE: I'm only using GDI+ in my CView derived OnDraw code during this test.
|
|
|
|
|
I seem to remember putting it into the InitInstance method of my CWinApp derived class.
Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p
|
|
|
|
|
That works if I just open the application and then do a File/New or File/Open but if I try to run an open verb on a data file, I get a "Windows cannot find file "Some file path", then the application window opens and the document shows. (The error message box remains somewhere in the z-order.
This does not happen if I don't initialize GDI+ until the CDocument Constructor is called.
|
|
|
|
|
Call Gdiplus::GdiplusStartup() in (CWinApp Derived Class)::InitInstance()
Call Gdiplus::GdiplusShutdown() in (CWinApp Derived Class)::ExitInstance()
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
