|
Maybe your friend has some other processes running in the background that use most of his CPU power. Then there's memory size, if he doesn't have too much free memory windows might start swapping while your program runns and that can and will slow things down (check if there's a lot of HDD activity while your program runs). Or it is a driver issue, for some reason OpenGL misses to detect/work with his 3D hardware so it reaches back to software emulation mode, this is not likely but who knows, do other OpenGL programs, games run fine and fast on his comp? Could also be that althorough his computer has a "superior graphic card" as you wrote, it does not have support for some feature you used in hardware so OpenGL uses software emulation which is much slower. Or it is a hardware issue, does he play 3D games, do those run fine on his comp? Can't think of anything else right now, mabye others will give you some more ideas...
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Sometimes you just have to hate coding to do it well. <
|
|
|
|
|
Hi Thanks for your reply,
I shall try to answer your question. I hope they will prove to be usefull
Code-o-mat wrote: Maybe your friend has some other processes running in the background that use most of his CPU power
I tried the program after a reboot. Granted there may have been some applications running in the background, but I would imagine it would be minimul
Code-o-mat wrote: Then there's memory size, if he doesn't have too much free memory windows might start swapping while your program runns and that can and will slow things down (check if there's a lot of HDD activity while your program runs)
I do not know how much memory (RAM) his machine has, but I'm pretty sure it has more than my laptop.
Code-o-mat wrote: Or it is a driver issue, for some reason OpenGL misses to detect/work with his 3D hardware so it reaches back to software emulation mode, this is not likely but who knows, do other OpenGL programs, games run fine and fast on his comp?
I've not tired other OpenGL programs I've written. Games run well on his machine.
Code-o-mat wrote: Could also be that althorough his computer has a "superior graphic card" as you wrote, it does not have support for some feature you used in hardware so OpenGL uses software emulation which is much slower
I believe he has a Nvidia card (8800GT?). I have an "integrated card" apparently. I didn't use any extended features of openGL. Infact i stuck with the basic Microsoft implementation, which i believe is version 1.1.
Code-o-mat wrote: Or it is a hardware issue, does he play 3D games, do those run fine on his comp?
3D games work really well on his machine. I've seen him play Counter Strike (Is that an OpenGl Game?), Command and Conquer 3, and Lord of the Rings online. To date I've not seen the frame rate drop, and he has the luxury of always selecting the best graphics options.
Something else I have just thought of is that my processor is a single core, but his is has a quad core. Could that be an issue? also I compiled my code on vista, but he uses XP. Perhaps theres some compiler options in Visual C++ that I need to look at. Any help would be appreciated.
|
|
|
|
|
Hi,
I have opened a comms port and I am reading data being sent to me. The program runs OK for a day or two (or three!) then ReadFile() returns FALSE with GetLastError() returning 5 (Access Denied). If I exit the application and re-start it, it works again.
The data rate is trivial so it doesnt appear to be due to an overflow.
The comms port is on a USB/serial adapter and the program is compiled using MSDEV 2008. I am not using overlapped access.
Anyone have any ideas what could be causing this or what I could try?
Thanks
Tony
|
|
|
|
|
softwaremonkey wrote: Anyone have any ideas what...I could try?
Have you tried this?
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
Just a stab in the dark, but maybe you should open the file (comm port) with SHARE_DENY_xxxx flags, to make sure another program does not come along ang grab the comm port out from under you.
When this happens, can you rerun your program straight away? Could you "just" detect this failure, close your file handle, wait a second or three, then reopen the comm port? Whether that it bad will depend heaviliy on how much the comm port is in action.
Iain.
I have now moved to Sweden for love (awwww).
If you're in Scandinavia and want an MVP on the payroll (or happy with a remote worker), or need contract work done, give me a job! http://cv.imcsoft.co.uk/[ ^]
|
|
|
|
|
Hi,
Windwos Font baseline is not aligned. Different font has different baseline.
I think I am using "ANSI_CHARSET". (I used "GetTextMetrics" to find out that "tmCharSet = 0")
If I select "SimSun" Font, the char will shift a little bit below the baseline. It is weird.
I tried to use "WORD" to repeat this. I found out:
If I type some chars using other font and then change to "SimSun" Font. All preceding chars were shifted a little down after a char using "SimSun" Font was input.
How can I find out how much I need to shift and what kind of font I need to shift?
Thank you very much,
modified on Tuesday, October 27, 2009 1:38 PM
|
|
|
|
|
I answered this question a couple of days ago; I don't think anything has changed much in the intervening time.
|
|
|
|
|
Hi
I did not get solution from you. The reason I post again I want to see others know the solution of it or not. It looks like not many are very familiar with Windows Font. I might need to deal with it myself. It will take a lot of time.
Thanks,
|
|
|
|
|
transoft wrote: I did not get solution from you.
Maybe not the solution you wanted, but I did explain what you need to do, part of which includes some research into fonts.
|
|
|
|
|
Hi,
I have a few property pages where I have collected all of the classes and implementation in one file (used the class wizard to do this).
On one of my property pages I get a strange run time exception on MS code in routine DDX_CBString.
I also noticed that the dialog "add variable" tool does not see any of the variables for the various resources (list boxes, comboboxes etc.) so it seems to be lost. Before this I noticed it would hang when I tried to create a variable for a resource or it reported file was read only. Also, I cannot add variables to new resources on this property page (wizard completes but variable not added to code).
I can delete all of my variables in the file and try to re-create them with the wizard but I thought I'd ask to see if anyone has experienced this.
Using VS 2005.
Thanks
|
|
|
|
|
al2500 wrote: On one of my property pages I get a strange run time exception on MS code in routine DDX_CBString.
An exception or an assertion?
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
I forget - bad pointer value.
I had to delete everything related to this property page and rebuild it - add variable wizard hangs even on startup.
|
|
|
|
|
I found a difference between a combobox data variable that works (in a different property page) and the one that gives an error.
The one that works uses -
DDX_Text
The one that has a run time error uses -
DDX_CBString
As far as I know all of the properties for the combobox are the same.
I looked these up in help and I can't tell why one would be used over the other but simply changing DDX_CBString to DDX_Text still results in a run time error.
modified on Tuesday, October 27, 2009 12:29 PM
|
|
|
|
|
It looks as though you are using a CString variable for your combobox instead of a CComboBox variable.
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
Yes CString,
I change the add wizard category to value vs. control since I don't need to control the resource.
Back to the wizard issue - I still got a "can't add/remove because class is read only" message when trying to add a variable but I restarted VS 2005 and it succeeded.
I noticed that when you use the class wizard to place multiple classes into one file it repeats the #includes at every class implementation and it also places a #include for the .h file with path.
I deleted all of these #includes except for the necessary ones at the beginning of the file and so far it seems to have helped but I can't be sure yet.
Just to be clear here is what you might see-
#include "stdafx.h"
#include "Myproject.h"
#include "c:/dir1/dir2/dir3/MyPropertySheetClass.h"
Perhaps the wizard gets confused by the multiple #includes or the inclusion of the path which appears to be unnecessary.
|
|
|
|
|
I would suggest that you try the following.
Close your project and exit visual studio. Then, delete any .ncb, .aps, or .clw file that you find in the project folders. Next restart visual studio and try again.
This sometimes can occur when the .ncb file becomes corrupted. Those files will be rebuilt as needed automatically.
Hope this helps.
Karl - WK5M
PP-ASEL-IA (N43CS)
PGP Key: 0xDB02E193
PGP Key Fingerprint: 8F06 5A2E 2735 892B 821C 871A 0411 94EA DB02 E193
|
|
|
|
|
I am currently developing an application using C++ and MFC. After gathering user data, it runs for a bit and produces its output in a separate window. I created this output window by deriving from the class CframeWnd and then defining CoutputWindow::OnCreate. I would consider this to be fairly standard.
It works and the output displayed is correct but I would the user to be able to highlight part or the entire window using his/her mouse and then type control-C to copy the highlighted text to the clip board. That part does not work. Is there an easy way for me to make this work? Did I make the wrong decision when I derived from CframeWnd? By any chance, is there a standard class in MFC that supports this feature with little or no additional work by the programmer?
Bob
|
|
|
|
|
I would suggest putting a ES_READONLY edit box in the floating output window, and putting text into that. Thena all the selection and cut and paste comes free.
Iain.
I have now moved to Sweden for love (awwww).
If you're in Scandinavia and want an MVP on the payroll (or happy with a remote worker), or need contract work done, give me a job! http://cv.imcsoft.co.uk/[ ^]
|
|
|
|
|
Iain,
Thanks for the response. I added the flag ES_READONLY to the create call of the window. However, it did not have any effect. Here is what the code now looks like:
Create( NULL, TEXT("CtlDemo2"),<br />
WS_OVERLAPPEDWINDOW|ES_READONLY, rectDefault,<br />
NULL, MAKEINTRESOURCE( IDR_MAINFRAME ) );<br />
Is that what you meant? Is there something else I should do to make it work?
Thanks
Bob
|
|
|
|
|
BobInNJ wrote: I added the flag ES_READONLY to the create call of the window.
What type (i.e., class) of window?
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
David,
The class of the window is COutputWindow (my class) and it is derived from CFrameWnd.
Bob
|
|
|
|
|
Those are MFC classes, not window (or system) classes. In any case, ES_READONLY is only for "Edit" classes.
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
David,
Thanks for the response. Well, I guess using ES_READONLY will not work. Do you have a solution that will work for me?
Bob
|
|
|
|
|
BobInNJ wrote: Do you have a solution that will work for me?
Have you tried Iain's suggestion?
"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
|
|
|
|
|
David,
Thanks for the response. Please see my response to him in this thread.
Bob
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
