|
Would you want a browser plugin that could hijack the default behaviour of your browser? I wouldn't. If the app opens up in a new window, then how is this any different from having a hyperlink with a jump target on it? The SL runtime has to behave itself like any other browser component, so it has to respect the same airspace issues.
|
|
|
|
|
Not sure what you mean by "hijack the default behavior". Seems to me the OP is just building a web application and would like to have the second click act differently than the first click. More specifically, the first click should open a new window and the second click should interact with that opened window. Sounds both reasonable and possible to me (see my answer below).
|
|
|
|
|
So, sounds like you want the first click to open the Silverlight application in a new window, but you want the second click of that same link to cause the Silverlight app to change in some way. If that is correct, then that should be doable. I'm pretty sure you can pass variables from one window to another window opened by that first window using JavaScript. I am also fairly certain that you can interact with a Silverlight control using JavaScript, even after the Silverlight control has been created.
See here and here (note: I didn't read those fully, but they seem like what you are looking for).
|
|
|
|
|
Here's what I have tried.
I created another silverlight "application" which is merely a control that looks like a hyperlink. Then I can use the LocalMessageSender to talk to my main app and also talk to the web page that my "control" app lives on.
The only problem left is that typically when a page changes, the tab in the browser flashes or goes red (at least this is the behavior in IE). This doesn't happen here. The user has no clue that anything happened until he goes to the main silverlight app page and everything shifts. It appears that the main app doesn't run the Message Received event until AFTER the tab becomes active again.
Brent
|
|
|
|
|
Hello everyone,
In windows service i.e. MyWindowsService, class1.cs has the code to receive messages all the time...
Everytime a message is received, it gets added to the Queue in class1.cs.
There is class2.cs in this windows service, which does the DeQueue.
Every 10th of a second, the silverlight application calls the class2 in windows service to pull the item in the queue. Note that since the silverlight page calls class2, the item is Dequeued from the Queue and gets passed to the silverlight page.
All works fine...
So you can see that the Dequeuing happens everytime the silverlight page calls the class2. And if the silverlight page is not running, then the Queue constantly is increasing inside the windows service.
Question:
I wonder if somehow, the Dequeing should happen automatically inside the service independent of the silverlight page?
1- If so, how do you suggest this should be done
2- Should the silverlight page, call the independent call inside the service every now and then also?
Hope you see what I mean.
Thank you
|
|
|
|
|
Well, the obvious way to do this I suppose would be to create a limited queue, and put the onus on the queuing mechanism to add in a number of items until it's full, at which point it starts dequeuing - if your SL app picks up stuff, great, but if not - the queue will have an effective upper limit. To do this, you should subclass the Queue class and manage it there. This is a fairly trivial piece of code to write, so I'll leave it for you to do but I will give you a couple of pointers:
1. When you dequeue your object, you'll have to lock it because you could have two threads accessing it and you want to guard against race conditions.
2. If you change the limit of your queue in code, check to see that the number of items on the queue don't exceed the new limit - if they do, then dequeue them.
|
|
|
|
|
I have a string "item2" and my comboBox contains item1, item2, item3, item4 how do I set the selected item to "item2"? I.e. how do I match my string to one of the comboBox items?
I am doing this in Silverlight 4, c#
Thanks in advance.
|
|
|
|
|
Set the SelectedValue property.
|
|
|
|
|
|
I have an object with a string property called 'Path'. For arguments sake it's set to "ImageSource".
I have a class 'Item'. It has a property named <Path>. I.e., if the user has set Path to "ImageSource" then 'Item' has a property named "ImageSource", if they set Path to "ApplePie", then 'Item' has a property named "ApplePie" and so on.
Now, I have an Image control and I want to bind the Image.Source to the property that the user specified with "Path".
I know in code, I can create a Binding object and set the source and property name dynamically, but I need to do this from a data template.
|
|
|
|
|
Sorry - I misread your question. The short answer is not directly. If you want to do this, you've got to use a converter.
|
|
|
|
|
Did you mean to write a value converter that takes some input(s) and returns an ImageSource object? Something like:
<Image Source="{Binding ..., Converter={StaticResource ...}" ... />
Ok, well, that won't accomplish what I'm looking for. I did that yesterday and it did work, but with issues. I used reflection in the converter to obtain the value of object.<Path> and I did get the image to show up, but this is resulting in a one time binding. If the value of object.<Path> changes, it wouldn't be reflected in the UI and I need it to be. If an app changes object.ImageSource, the icon should change on the screen obviously.
I also tried setting the binding on Image.Source within the converter, but that just confused WPF and the binding engine crashed  .
Unless you had some other thought?
|
|
|
|
|
Does the value of object Path raise a change notification. If it doesn't then there's not a lot you can do to updated the binding anyway. If it does, then you could use the Reactive Extensions to watch that property, and react accordingly. This could not, of course, be done in the converter - which is there purely to convert the object. You would need to do this in the VM which backs your view, and then you could react to the changes there. Thinking about it, this is the simplest way to achieve this.
|
|
|
|
|
Well, this is for a custom control (an enhanced ListView control), so there is no View / ViewModel involved. It is still a lookless control of course . I'm just not tying the design of the control to MVVM. Yes, the underlying property in the test app / test object does implement INPC.
Anyways, I dumped the Converter idea and went a different route which is working how I want it.
The "ListViewEx" overrides the item container generation and creates ListViewItemEx objects instead of ListViewItem objects.
Then in ListViewItemEx.OnApplyTemplate() I find the image control in the data template and create a Binding object and call image.SetBinding(Image.Source, binding);
This way I get true data binding to the underlying property and I don't have to do any crazy voodoo magic to get stuff to refresh. Of course, there is one issue and that is if the user suddenly decides to change Path from "ImageSource" to "SomethingElse", its not going to work because OnApplyTemplate() only gets called once.
EDIT: Actually, I guess there is a work-around. ListViewItems are regenerated when they go off screen and come back on, so I guess the user could just refresh the view if they really want to change Path.
|
|
|
|
|
Without knowing what effect the ListView is having, I have to wonder whether or not you could have achieved the same functionality with an attached behavior. Whenever I hear that a WPF item has had to be subclassed, I end up wondering if the wrong problem has been solved.
|
|
|
|
|
My "ListViewEx" adds back all the missing functionality in the stock ListView (built in sorting w/ native OS look & feel, filtering, real OS style multi-select w/ translucent rectangle, keyboard interface, etc). I'm trying to structure my public interface so that it looks like a "factory install" and will work with MVVM and is completely generic and independent of anything. The particular feature I was adding was item image support. Following the model already in place in WPF, I made it similiar to DisplayMemberPath where you give the name of the property that will provide the ImageSource. The property I added was added to "GridViewEx" since that is where it belongs. The Image control itself however is in the ListViewItem data template.
I don't know how closely you've worked with ListView internals, but its quite an annoying control. It has lots of levels of objects and lots of templates. The column headers are actually split into 2 separate classes, etc.!
There are plenty of valid reasons you need to subclass a WPF item. Sometimes part of the template or behavior you need to modify belongs to the item.
For example, try adding back the node lines in a TreeView without subclassing the TreeViewItem  .
|
|
|
|
|
Indeed. As I said, I didn't know your requirements, and in this case what you have had to do is legitimate. Saying that, I have seen far more cases where people have subclassed to achieve something rather than using attached properties and behaviours which are more in keeping with the WPF of doing things.
|
|
|
|
|
Hi,
I have a DataGrid that is bound to ObservableCollection.I have textbox control in the same window..Based on text change event of text box(let us say filtering..based on typed character datagrid should change) how do i update the grid in MVVM model?
|
|
|
|
|
The glib response is change the observable collection the grid is bound to. Need a bit more info really.
|
|
|
|
|
Have a look at this[^] post for some ideas.
|
|
|
|
|
Hello ,
I am manoj.
As these days i was working with WPF canvas and i find difficulties in resizing my controls while resizing the windows form
Like
1. I have few controls on my canvas at diff diff location
2. when i resize the controls the approrpiate controls i mean childs should be resized
3. like width,height,left,top,bottom,right
as more brief
I placed four controls on four corners of canvas
now if i resize the canvas i should be able to resize the child controls & even the Left,top,bottom ,right should be same
I mean if one controls is at left=0,Top=0
it should be there itself
if it is at the right end corner then even i resize the canvas the controls should resize but the right should be zero.
How can i achieve this ?
Please
Thanks,
Manoj
Thanks,
Manoj
|
|
|
|
|
This[^] custom control might help.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
|
|
|
|
|
Try setting the margin property of the control. It takes a little playing around with but it should do what you are after.
"You get that on the big jobs."
|
|
|
|
|
1.
I need to change each input character in autocompletebox to Uppercase.
For a textbox I am using this -
private void acb1_PreviewTextInput(object sender, TextCompositionEventArgs e)
{
char ch = Convert.ToChar(e.Text);
if (char.IsLetter(ch))
{
acb1.Text += Char.ToUpper(ch);
e.Handled = true;
}
}
This works too for autocomplete box but this disables the dropdown list to show. Anyway around this?
2.
I need the text input to match only listbox items. If the user inputs a char so that the text has no matches, I need to delete that char back.
I can do this manually but since this will give an empty dropdown menu, I think there is an easier way.
3.
When entering text and the dropdown menu show up, I need the first item to be highlighted so that the user can just press Enter to select.
Thanks in advance.
|
|
|
|
|
To set the characters to upper case, set CharacterCasing.Upper on the textbox.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
