|
It used to be possible to get a categorized RSS feed by using urls like the following:
general articles: /webservices/articlerss.aspx?cat=1
android articles: /webservices/articlerss.aspx?cat=22
etc...
however, if i use the cat=22 parameter on the url I receive nothing.
has this been disabled, changed, something else... ?
|
|
|
|
|
You better post this in the Site Bugs & Suggestions forum[^] instead of here; the admins visit that forum frequently.
The quick red ProgramFOX jumps right over the Lazy<Dog>.
|
|
|
|
|
I thought the "features forum" was a good place to post.
anyway, thanks for the tip, I just moved it over there
|
|
|
|
|
FYI-I am not the coder. I receive a revised PDF document that I overwrite on a existing location on a server that points to a desktop icon for users (they select the icon, a menu opens then from there they choose the document they need). Lately I am experiencing an inconsistent issue when saving an updated <configuration><appsettings><" value" /> when overwriting a document. I change my value increment and select save but does not save. My question: Is it the way I save the document? Currently I open the document from the email attachment and save to my B drive I open our server to access the B drive and the location of the documents, then I drag the document from the B drive to the server location, select the code, change increment and save - usually without issue. Does using open, save or save as have an impact? Should I select and drag to overwrite instead of opening and save/save as? Is there an impact if opening from email attachment or through a an attachment in our service management software? Basically if the new document was been created using a different adobe version than the document on the server it code would not save, correct? I am not loading these documents any different. My IT coder insists I am doing something wrong but it is so inconsistent. Our documents need to be Acrobat 5 so if someone creates using acrobat pro or reader 9 then they need to fix form or I will not be able to save the code...correct???
|
|
|
|
|
While uploading a picture to my Profile here on CodeProject i found they are limiting it to 20Kb.I compressed my pciture from 5 Mbto 156Kb but couldn't do more........How should i post my pciture with this size?It's not allowing me 
|
|
|
|
|
Resize the image - it shouldn't be more than about 150x150 pixels.
Save it as a JPEG, and adjust the compression as required.
If it's still too big, try TinyJPG[^].
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I have a working ATmel Studio project and trying to add it as a static library to AS Solution.
Apparently this project defines a "variable" FATFS using XML and I am getting a linker error about it being undefined.
I can handle that, but I have no idea how to <b><b></b>link my main project to the static library reference to the XML. </b>
I did add a search directory to the XML something , I am not sure what it is , some kind of doc, and it did not help.
I was trying to find gcc options about XML and all I got to go by was "gccxml and gcc_xml". ATmel Studio compiler is "plain gcc".
Please no references to "try other sites / support groups". ATmel tech support is down for maintenance (?) and I do not want to bother "the other group" with "basic x questions".
And no I do not want to learn XML at this point also. I did check the AS .cproj and it is XML.
So any simple explanations / hints on how gcc links to / uses XML will be appreciated.
Cheers
Vaclav
Addendum
OK the FATFS is defined by FatFs library and I need to find how this library is added to the original code by gcc using XML.
-- modified 11-Mar-15 15:28pm.
|
|
|
|
|
i am a student of I.T my final year project is tracking system how can i track an employee using his phone which has gps in it and which language should i choose to develop this app and how do i connect that employee phone to the server and get his location i want to use asp.net and c#.
|
|
|
|
|
Please stop re-posting! Just stop it.
No effort, not real questions, nothing. Please stop it.
—SASergey A Kryukov
|
|
|
|
|
We gladly help with specific questions of code but we won't do everything for you.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
Is there any way I can send a private email to another CP member?
|
|
|
|
|
Open any message posted by the member, you can reply to him by selecting the Email option.
|
|
|
|
|
Try doing that with me. I switched this option off because I got sick of being emailed with requests to give free help to people.
|
|
|
|
|
I managed to contact him, thanks. By the way: This was NOT a case where I was looking for free help. 
|
|
|
|
|
|
Hello there. I have tried a number of options to convert a RAW mp4 file into mp4 file and showing the timestamp in it. These options are given as under
cmd>> ffmpeg.exe -timestamp now -copyts -i input_file_name.mp4 -f mp4 -vcodec copy ouput_file_name.mp4
cmd>> ffmpeg.exe -i input_file_name.mp4 -f mp4 -vf "drawtext=fontfile=arial.ttf:text=%{localtime}" -vcodec copy ouput_file_name.mp4
But I am unable to draw timestamp (local time of computer of video seek time) on the video. How could I do that??? Thanks for any pointer.
This world is going to explode due to international politics, SOON.
|
|
|
|
|
Anyone here..i know all of u are all 'masta' just asking simple question here.. shat are the type of encrytion use usually for asp.net programming langguage..i have some sort of older system that i tried to understand IuzcrwU5l78vmLa0um6KdSEZr54= <---- This is the code that i cannot decryted..pleaze anybody masta at all
|
|
|
|
|
Are you asking someone to decrypt "IuzcrwU5l78vmLa0um6KdSEZr54?" No, you would need the key to decrypt it.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
It's impossible to tell, since encrypted data is just that, something that is not possible to interpret without the key, and the algorithm. If it was easy there would be no point in using it.
|
|
|
|
|
My teacher told me, that if we work for someone or some company, to develop their application. The application is to be handed over only, not the source code.
Is it true, that if someone hires me for a one-time software development, that I should only (at the end of the project) hand over the application (in an executable form) and not the source code for the project?
The sh*t I complain about
It's like there ain't a cloud in the sky and it's raining out - Eminem
~! Firewall !~
|
|
|
|
|
I take it your teacher has absolutely NO experience in the real world. The answer to this is that it depends entirely on your contract with the client. If your contract states you hand over code, then you hand over code - in fact, if you're a contractor then, chances are, that's what you're handing over.
|
|
|
|
|
Oh, so as, I mean these freelancer dudes, when they work for a project. They hand over the actual source code to the employer itself.
The sh*t I complain about
It's like there ain't a cloud in the sky and it's raining out - Eminem
~! Firewall !~
|
|
|
|
|
Yes, but as said, depends on the contract, also whenever you're working for a company as an employee (not contractor) whatever you create is property of the company.
Things are more complicated than what your teacher is telling you, my recommendation to you, "read the contract before you sign it"
I want to die like my grandfather- asleep, not like the passengers in his car, screaming!
Visit my blog Smart Purple Monkey and leave me your comments
|
|
|
|
|
I agree with Gonzoox, the first thing is to read the contract you've signed with the company that hired you...
|
|
|
|
|
OK I am stuck again and getting nowhere asking this on Arduino site.
To my best knowledge Arduino application is build using gcc compiler.
I know that gcc compiler is passed ton of parameters know how to find out their function / description.
I understand such parameters can be put into a batch file and Arduino folks apparently use plain x.txt file to do just that.
I am LITTLE familiar with .bat files syntax , but have not have any need to use bat files ages.
Now what I DO NOT KNOW how is this batch / platform.txt file is organized, its syntax etc.
<b>Could I get some pointers where to start looking for basic information about usage of txt files in passing parameters to compilers?
</b>
I am enclosing the entire platform.txt file in case it would be easier just to annotate it to show me what I am looking at or where to find what particular line is suppose to accomplish.
PS I am basically trying to figure out how is this platform.txt accomplishing the last task
- SAM3 Uploader tools, but I want to learn more about the txt batch files usage.
I have full access to BOSSAC source on github.
I really appreciate any help.
Thanks
Vaclav
# Arduino SAM Core and platform.
#
# For more info:
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
name=Arduino ARM (32-bits) Boards
version=1.6.0
# SAM3 compile variables
# ----------------------
compiler.path={runtime.ide.path}/hardware/tools/gcc-arm-none-eabi-4.8.3-2014q1/bin/
compiler.c.cmd=arm-none-eabi-gcc
compiler.c.flags=-c -g -Os -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD
compiler.c.elf.cmd=arm-none-eabi-gcc
compiler.c.elf.flags=-Os -Wl,--gc-sections
compiler.S.flags=-c -g -x assembler-with-cpp
compiler.cpp.cmd=arm-none-eabi-g++
compiler.cpp.flags=-c -g -Os -w -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -Dprintf=iprintf -MMD
compiler.ar.cmd=arm-none-eabi-ar
compiler.ar.flags=rcs
compiler.objcopy.cmd=arm-none-eabi-objcopy
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
compiler.elf2hex.flags=-O binary
compiler.elf2hex.cmd=arm-none-eabi-objcopy
compiler.ldflags=
compiler.size.cmd=arm-none-eabi-size
compiler.define=-DARDUINO=
# this can be overriden in boards.txt
build.extra_flags=
# These can be overridden in platform.local.txt
compiler.c.extra_flags=
compiler.c.elf.extra_flags=
compiler.cpp.extra_flags=
compiler.ar.extra_flags=
compiler.elf2hex.extra_flags=
compiler.libsam.c.flags="-I{build.system.path}/libsam" "-I{build.system.path}/CMSIS/CMSIS/Include/" "-I{build.system.path}/CMSIS/Device/ATMEL/"
# USB Flags
# ---------
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
# Default usb manufacturer will be replaced at compile time using
# numeric vendor ID if available or by board's specific value.
build.usb_manufacturer="Unknown"
# SAM3 compile patterns
# ---------------------
## Compile c files
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -mcpu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.libsam.c.flags} {includes} "{source_file}" -o "{object_file}"
## Compile c++ files
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -mcpu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.libsam.c.flags} {includes} "{source_file}" -o "{object_file}"
## Create archives
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{build.path}/{archive_file}" "{object_file}"
## Combine gc-sections, archives, and objects
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" {compiler.c.elf.flags} -mcpu={build.mcu} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.c.elf.extra_flags} -o "{build.path}/{build.project_name}.elf" "-L{build.path}" -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--start-group "{build.path}/syscalls_sam3.c.o" {object_files} "{build.variant.path}/{build.variant_system_lib}" "{build.path}/{archive_file}" -Wl,--end-group -lm -gcc
## Create eeprom
recipe.objcopy.eep.pattern=
## Create hex
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
## Compute size
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
recipe.size.regex=\.text\s+([0-9]+).*
# SAM3 Uploader tools
# -------------------
tools.bossac.cmd=bossac
tools.bossac.cmd.windows=bossac.exe /k // try this
tools.bossac.path={runtime.ide.path}/hardware/tools
tools.bossac.upload.params.verbose=-i -d
tools.bossac.upload.params.quiet=
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -e -w -v -b "{build.path}/{build.project_name}.bin" -R
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
