|
I've decided to rather stick with a timer for now, because there is a massive amount of logging going on here, and with a timer I can more easily ignore it if I prefer, instead of getting too wrapped in with something that only occasionally needs to be observed real time.
The mysterious "core instance" is just a bad term I used to describe the uncertainty I had over whether it should be a singleton, or a new instance for each injectee, but made by a factory that is a singleton, or maybe just conjured up by Unity or something.
There are so many blog rants paired with educational articles built up around this project it's not funny. I started late today (writing a blog, that is) but won't easily be able to stop. Just let it flow. 
No object is so beautiful that, under certain conditions, it will not look ugly. - Oscar Wilde
|
|
|
|
|
Brady Kelly wrote: The mysterious "core instance" is just a bad term I used to describe the
uncertainty I had over whether it should be a singleton, or a new instance for
each injectee, but made by a factory that is a singleton, or maybe just conjured
up by Unity or something.
"some object" 
Brady Kelly wrote: There are so many blog rants paired with educational articles built up around
this project it's not funny.
Often tied to a platform, specific logger, or the one example on how to inject a logger.
Brady Kelly wrote: I started late today
You're not using Worpress, right? 
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
As I typed, I had a vision of "some object" sitting quietly in the corner, but emanating out into the furthest reaches of the least covered library code. This suggested a name with some more meaning.
I am indeed using WordPress, but I kept my eye quite firmly on the "Save a draft" button until I closed that tab.
No object is so beautiful that, under certain conditions, it will not look ugly. - Oscar Wilde
|
|
|
|
|
|
Background: I am familiar with C# also Winforms - also did some programming there. Also familiar with Java. (Also bit of HTML)
Now,I wanted to decide which to learn Android development or ASP.NET MVC.
But your advice would be very valuable since I can't learn the two at the same time. Given my background which of them needs less commitment? Which requires less effort? In which there is less information to process? (I am asking like this because I have some other commitments at this stage too).
nb: Also I was but hesitant initially whether I liked web development (never tried though) - that is why I thought about Android because it resembles more desktop development I believe, due to API usage etc; and I know I like C# and Java should be fine too.
I would really appreciate your input. Because in my country the direction I am currently working in is not very demanded (C embedded, and bit of C++).
|
|
|
|
|
I love how ridiculous questions like these are.
Why? Well, it's easy. We don't know you. We have no idea what your REAL background is. We have no idea what you really know, what your skill set is really like, how fast you pickup new stuff, how well you apply your previous experience, ..., NOTHING.
Nika Dev10 wrote: ...since I can't learn the two at the same time
B U L L S H I T
Why did I just say that? See above.
For my current project at work, I had to learn Entity Framework, MVC, ASP.NET, Razor, javascript, HTML5, Kendo UI, jQuery, ... , oh and, at home, I'm teaching myself digital electronics, constructing USB controllers, PIC microcontrollers, Windows Drivers, kernel debugging, ... ALL AT THE SAME TIME!
Who gives a sh*t where your country is headed as far as demand? The real question is what do YOU want to do? Where do YOU want to take your skills?
|
|
|
|
|
I really advise you to calm down. There is nothing ridiculous going on here, except your reply!
Now, relax, read the question once more - try to
grasp what was asked there and then reply, without
your silly remarks please.
To get a hint how the proper reply should look like
please look on replies on Android forum - I posted it
there also (hope didn't violate any rules - people
there understood what I wanted unlike you).
Anyway, please let's end our discussion here
you show no sign whatsoever that it may make
sense to continue dialogue with you.
ps and please don't pollute the Android forum
in case you think up to post something there
with intent to spoil things.
pps I already gave you idea about my background
in the opening of my question
|
|
|
|
|
Really?
What if I told you it should take you 3 days to pickup ASP.NET/MVC and it didn't. It took you say, 3 months. What then?
How would you measure "effort" in a quantitative fashion, independent of individual abilities and experience?
All I'm saying is that YOU are the only person on this planet that can answer your question and the only way you're going to get a feel for how long it's going to take to be productive in your next project is to just jump right in.
Nobody ever stops learning this stuff so there is no way to "complete" the studying. There is always stuff to learn, even if you've been working with the technology for years.
|
|
|
|
|
Your response is stupid.
Of course everything depends on everything, but you can always
do some estimates.
And tell a person a rough (reasonable) estimate.
For example, which is more to learn,
whole iOS SDK and to get familiar with it,
or just HTML syntax? Does this answer also depend?
I told you my background
and asked a simple question but you don't want to
understand it. Ok I am done here.
|
|
|
|
|
Forget any pain ... and go for the "gold".
If you're open to learning a new platform, I would suggest Android over any flavor of ASP.NET (MVC; Forms).
"Freelance" Android opportunities are currently running around 10 to 1 compared to ASP.NET.
(Freelance is all I do; if you're really interested in a "corporate" job, then the spread is probably smaller).
Go for a steady income ... then start looking for other things to do if you're not having enough fun.
(Keeping in mind than if you do decide to concentrate on sharpening your C# skills, you can transfer those to Android via Xamarin's cross-platform development software).
|
|
|
|
|
Indeed. I have been woefully scanning past the tons of Android jobs in my freelance notification emails, looking for the one or two .NET jobs. Time to fire up Android Studio again and get learning.
No object is so beautiful that, under certain conditions, it will not look ugly. - Oscar Wilde
|
|
|
|
|
I agree with Dave, there is no way anyone on this planet can answer your question. Maybe you have a natural ability for one technology but not the other. Maybe you find one interesting but not the other. Maybe one resembles another technology you have used previously but not the other.
No one on this or any other forum can give you anything other than guess based on their own personal experience.
My advice would be to spend some time learning BOTH and see how you get on.
"There are two ways of constructing a software design: One way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies. The first method is far more difficult." - C.A.R. Hoare
Home | LinkedIn | Google+ | Twitter
|
|
|
|
|
how can we convert a code written in c# into matlab??
any idea?
|
|
|
|
|
By using an online Converter[^], or rewriting it by hand.
MATLAB will not have all the functionality of the .NET framework though.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Nor vice versa!
A positive attitude may not solve every problem, but it will annoy enough people to be worth the effort.
|
|
|
|
|
Hi everybody  !
I am looking for an automated tool or script that will take a huge Borland C++ buider project and convert it into Visual Studio .NET project. A full conversion is not necessary, rather a starting point for manual intervention.
So, after researches, i focused on the vcl conversion part to .Net, win api, so i want to know if is there a tool that can do this , at worst, just partially,
|
|
|
|
|
Please do not post the same question in multiple forums.
|
|
|
|
|
What does this have to do with the .NET Framework??
Oh, that's right, NOTHING!
|
|
|
|
|
crystal report viewr does not found...how can i solved..?
|
|
|
|
|
Really? How is anyone supposed to answer that "question"? You haven't provided any details at all about what error you're getting.
|
|
|
|
|
Install the Crystal Report Viewer?
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Muthu Karthikeyan,
Hi Friends,
This is my first question i post to code project.I download lot of concepts through this site. Its help me good. I believe in this question i got some clarity its possible or not. Thank you.
|
|
|
|
|
|
Your question makes no sense at all. You never "integrate" anything into the .NET Framework.
The question should be specific about what it is you want to do with AutoCAD in your application.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
