|
|
Dears C# professional
How can I read RAW image format block by block in binary mode?
|
|
|
|
|
RAW is not a format, it's a name for a thousand proprietary formats and a couple of standardized ones.
Anyway, you'll probably want a BinaryReader.
|
|
|
|
|
Dear Harold
I know what you mean, raw is a picture that unprocessed yet. How can I use BinaryReader? could you give me some example?
Thanks.
|
|
|
|
|
Just make a new binary reader, giving it some stream as input (probably a file stream in this case), maybe like this: (not tested)
using (BinaryReader r = new BinaryReader(File.OpenRead("foo"))
{
And then just start pulling out data,
uint width = r.ReadUInt32();
uint height = r.ReadUInt32();
int[] pixels = new int[width * height];
for (int i = 0; i < pixels.Length; i++)
{
pixels[i] = r.ReadByte() + r.ReadByte() * 256 + r.ReadByte() * 65536;
}
}
Except of course your format will be more complicated.
You may need a different solution, for example if the format is a bitstream then BinaryReader won't help.
|
|
|
|
|
|
i have written code in c# for USB read and write using WINUSBNET library,after some time my device automatically un-plugged by OS and program exit with error code.
Managed (v4.0.30319)' has exited with code 0 (0x0).
|
|
|
|
|
i need help trying to get my ai to have basic convosations so if i say hello it will reply and say hello how are you and then i would say good but its not working
|
|
|
|
|
Member 11780399 wrote: but its not working
You need to explain what that means if you want people to help you. No one can guess what your code is doing.
|
|
|
|
|
If it's not working, and it compiles, you have a logic error somewhere. If it won't compile, you have some form of syntax error. Beyond that level of information, we cannot help you because you have provided no details whatsoever.
|
|
|
|
|
In C# 2005, I used the Nokia E63, I want to check SerialPort Exist Modem, While it run does not get run COM port, you see my code
private void btnGetPort_Click(object sender, EventArgs e)
{
cmbPort.Items.Clear();
foreach (string portName in SerialPort.GetPortNames())
{
try
{
using (SerialPort sp = new SerialPort(portName, 9600))
{
if (!(sp.IsOpen)) sp.Open();
sp.DiscardInBuffer();
sp.DiscardOutBuffer();
sp.Write("AT\r\n");
System.Threading.Thread.Sleep(100);
string response = sp.ReadExisting();
if (response == "OK")
{
cmbPort.Items.Add(portName);
}
}
}
catch (Exception ex)
{
continue;
}
}
}
|
|
|
|
|
We can't really help you based on that little: but I'd guess that sleeping the thread for 100ms is not a good idea.
That's only 1/10th of a second, and at 9600 baud that's not a lot of characters - about 96 in total.
9600 baud == 9600 bits per second ~= 960 characters per second == 96 characters in 1/10th second.
So unless the data goes out quickly, the modem responds quickly, and there is no other data returned such as a "welcome" or "status" message it's quite likely that the response may be just getting lost, because you aren't giving it enough time to talk back to you.
There is also the swallowing of all errors so you don't know what problems there are.
And the high probability that the modem doesn't just return "OK" - as a minimum it's probably going to put a carriage return / line feed pair, and quite likely to echo the input back to you as well.
And it may well need flow control (RTS/CTS and DCD), or even the bits per character and parity set correctly.
So start with the debugger and look at exactly what is happening. What are you getting back? Anything? Nothing? We can't do it for you!
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
According to you how much have I to put Thread.Sleep(???) to run for 9600 baud ? can I put Thread.Sleep(800) to run 9600 baud ?
|
|
|
|
|
|
No, sorry - we can't.
What I might think of as a "good project" you might think boring, simple, or hideously complicated. We don't know anything about your interests, skills, or abilities - so we can;t just say "try this" because we have no idea what would be relevant to you, or what you know that you can use to get the project moving. Let alone what projects you have completed already!
For example, if I recommend you start with a project requiring a lot of database work - but you know nothing about database - what use is that to you?
And we don't know what you want to use the project for either: practice? Hand in as part of your course? What course?
Sit down, think about the reasons for doing the project, and what you know about, and try to come up with something that fits in there, and with your interests.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
I want to be able to delay windows power events, through a windows service that will be running in the background. I need to delay these events, such as shutdown, restart, etc. a few seconds, so that I can perform an operation before the pc goes into any of these events.
Can someone please guide me in the right direction?
Thanks.
|
|
|
|
|
You don't delay them. Your code has to register with Windows to receive notifications of power events. Windows won't change power state until all subscribers let Windows know that it's safe to do so.
You have to subscribe to the SystemEvents.PowerModeChanged event. It's not that straight forward in a Service app. You have to have a message pump running (which Services don't normally have) in order to get the power messages Windows broadcasts. There is an example linked to by this page[^].
|
|
|
|
|
What I am trying to do is detect the windows power events with a service and then send a message using sockets to a java app, so that it can do the rest of the process.
Please tell me if this is possible or give me a better approach to aolve my problem, still using the java app I have.
|
|
|
|
|
Is the Java app running on the machine too or on a separate machine? Using sockets I would assume on a separate machine.
In which case, you send the message and then the event handler returns. That's it, nothing else.
But I get the feeling there's more to this process than you're telling us, like you have to wait for something to come back from the Java app or whatever?
|
|
|
|
|
Both apps are on the same computer.
I just need a way to tell the java app that a power event has ocurred. I just don't know if I will have to delay the power event, so that the java app has enough time to respond to that event.
|
|
|
|
|
In that case you're going to have to interact with the power manager and register for notifications yourself. Read this[^].
You've got some research to do there. I don't know exactly what you have to do to accomplish the goal and I don't know your exact requirements for monitoring which power states you need.
It's entirely possible the SystemEvents.PowerModeChanged event will not work for you and you won't be able to use it. You'll have to set this up yourself too.
|
|
|
|
|
What I was thinking was to use the system power events in c#, to send a message through a socket and then do the rest of the process in java. I was thinking that maybe I could use an event or some config to delay these power events, so that my java app can do the rest, or maybe a shortcut with a cmd command.
I am trying to communicate with C#, because there is no way that I know to monitor system shutdown or any other power event, so that it is platform independant, so that it works on all versions of windows.
|
|
|
|
|
That's why I said YOU have some research to do. You're adding more and more things to your requirements and I'm not getting paid to do (and redo) your homework for you.
If you're trying to support every version of Windows you're going to be disappointed because only you know what exact power modes you're going to support and some of those options might not exist in older versions of Windows.
Also, there are some situations where Windows does not ask the applications if it's OK to change the power state. Again, only you know if that's acceptable or not and under which circumstances.
I've pointed the way. The rest of the reading is up to you.
|
|
|
|
|
Thanks for all your help.
|
|
|
|
|
What I will end up using is win form that detects the power events and sends a message through sockets. I think that is the easiest way thanks for your help.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
