|
Hi,
I have installed Microsoft SMTP server in IIS of Windows Server 2012. When i have given Windows Integrated Security in Outbound security. The mail messages are stuck in outgoing queue of smtp server (in C:\inetpub\mailroot\Queue).
If i use anonymous authentication or basic authentication, the mail server is just working fine.
Anyone suggest what could be the possible reason for this?
|
|
|
|
|
Wrong rights on the user-accounts; does not sound like a C# problem.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
The following features must be supported:
1. Fast drawing of many(more that 10-100k) single points and small lines.
2. Fast drawing of several (up to 10-100) images with high resolution(~1500x1000), which can be
a) partially out of view
b) all images in view at the same time scaled to small size
c) all in view with big size having transparency
3. Graphic control should be able to take only part of Windows Form (because UI is written using DevExpress)
Currently my choices are OpenTK and MonoGame, but I'm not sure they can do all this easily.
|
|
|
|
|
They should be able to cope with what you're after better than using GDI+ (the default for Windows Forms). I would suggest that you might want to start off with a quick prototype application to see if it fits your needs. As for integrating with Windows Forms, have a read of this[^].
This space for rent
|
|
|
|
|
Unity3D "may" be easier than MonoGame; MonoGame is more low-level.
Does that make Unity3D slower? Don't know; would check it out.
|
|
|
|
|
I have used both SharpDX[^] and SharpGL[^] and can say that they are both quite powerful.
What do you get when you cross a joke with a rhetorical question?
The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism.
Do questions with multiple question marks annoy you???
|
|
|
|
|
How can I use the CreateProcessAsUser or LogonUser when staring the process:
Dim ps As New System.Diagnostics.Process
ps.StartInfo.UseShellExecute = False
ps.StartInfo.Domain = Domain
ps.StartInfo.UserName = UserName
Dim pword As New System.Security.SecureString()
For Each c As Char In Password
pword.AppendChar(c)
Next
ps.StartInfo.Password = pword
ps.StartInfo.LoadUserProfile = False
ps.StartInfo.WorkingDirectory = ApplicationWorkingDir
ps.StartInfo.FileName = "cmd.exe"
ps.StartInfo.Verb = "runas"
If BatchSize = String.Empty Then
ps.StartInfo.Arguments = "/c bcp " + DbTable + " in " + SourceFile + " -m " + MaxErrors + " -f " & FMTFile & " -e " & ErrorFile & " -o " & LogFile & " -S " & ServerName & " -T "
Else
ps.StartInfo.Arguments = "/c bcp " + DbTable + " in " + SourceFile + " -m " + MaxErrors + " -f " & FMTFile & " -b" & BatchSize & " -e " & ErrorFile & " -o " & LogFile & " -S " & ServerName & " -T"
End If
ps.StartInfo.WindowStyle = ProcessWindowStyle.Hidden
ps.Start()
ps.WaitForExit()
|
|
|
|
|
What kind of app are you writing and where is this process being started?
Is this a Windows Forms app, console app, WPF, Windows Service, ASP.NET, ... ??
Is the process being created locally, meaning on the same machine as the code you've shown or is it being created on a remote machine?
....and you STILL do not have to run CMD and do not need the "RunAs" verb line. It's nice to see you don't listen to the answers you've been given.
|
|
|
|
|
|
it's a console application running on a server from a scheduler.
I need to start a process as specific user with access to cmd.exe and pass userID in my process
|
|
|
|
|
byka wrote: it's a console application running on a server from a scheduler.
The default task scheduler[^] contains options to run your app under another account. So, I assume you are not using that task-scheduler?
byka wrote: I need to start a process as specific user with access to cmd.exe and pass
userID in my process
You mean that it should display a console-window where the user can execute additional commands?
You don't need to start CMD just to execute an application that you would normally start using the CMD-prompt.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Maybe this explanation will help :
scheduler running under user account with no permission to C: drive.
Application account should have some permission to C:drive in order to access cmd.exe
I need to add code ( CreateProcessAsUser or LogonUser) for application user in order to call cmd.exe
|
|
|
|
|
OK, this is a bit better but there's still lots of detail missing.
You're writing the scheduler app? Is this written as a standard console or Windows Forms application or is it a service?
Does the application this scheduler is launching have to show up as a window that the user can type in?
Why must you call CMD instead of just launching BCP directly?
|
|
|
|
|
You're writing the scheduler app? - Yes
Is this written as a standard console or Windows Forms application or is it a service? - Consolse application
Does the application this scheduler is launching have to show up as a window that the user can type in? - No
Why must you call CMD instead of just launching BCP directly?- you mean call bcp.exe instead of cmd?
|
|
|
|
|
byka wrote: you mean call bcp.exe instead of cmd?
Yes
|
|
|
|
|
|
That's not an answer to the question.
WHY do you think you must call CMD instead of just launching BCP directly?
|
|
|
|
|
byka wrote: Maybe this explanation will help
An answer to the question would have helped too. Are you or are you not using the default task scheduler? If yes, simply define the account you want to run under in the settings.
byka wrote: scheduler running under user account with no permission to C: drive.
Application account should have some permission to C:drive in order to access
cmd.exe
..sounds safer to give the user the permissions he/she actually needs. The user you are impersonating prolly has some more priviliges than just "cmd.exe".
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
If you're using the default task scheduler, supply credentials that have appropriate permissions.
If you've baked your own task scheduler, run it as a service, using credentials that have appropriate permissions.
Either way, the wheel, axle, transmission, and engine have already been invented. You just need to paint the car.
|
|
|
|
|
Hello! I'm using vb.net in SharpDevelop 4.4. I tryed import AvalonEdit(WPF Text Editor) in my project. But i can not do.
Error Message is :"The assembly ISHarpCode.AvalonEdit, Verison=4.4.42.9749 Culture=neutral, Publickey Token=9cc39be672370310 does not contain any components."
Thank you for help.
|
|
|
|
|
That suggests that the file is corrupt. Try downloading it again, or check the AvalonEdit website.
|
|
|
|
|
I am running batch apps on Windows 2012 server and getting the following error:
MESSAGE: The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine
My connection string:
<value> Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Temp\File.xls; Extended Properties="Excel 12.0 Xml;HDR=YES";
Excel 2010 installed on a server
what am I missing?
modified 2-Feb-16 11:29am.
|
|
|
|
|
|
On a server I have Excel 10 installed. what do I need to change in my connection in order to use it?
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
