|
void CFrameworkDlg::OnTimer(UINT nIDEvent)
{
// TODO: Add your message handler code here and/or call default
switch (nIDEvent) {
case IDC_Timer:
{
KillTimer(IDC_Timer);
if(!SetTimer(IDC_TIMER_CHECKUP_THREAD,50,NULL))
DestroyWindow();
FunctionStart();
break;
}
case IDC_TIMER_CHECKUP_THREAD :
{
if (!FuncEndupTest())
UpdateData(FALSE);
break;
}
}
CDialog::OnTimer(nIDEvent);
}
//----------------------------------------------------------------------------
//Procedure:
// FunctionStart(void)
//Description:
// Entry point for each function
//Input:
// None.
//Output:
// None.
//
void CFuncDlg::FunctionStart()
{
m_hFunThread = CreateThread(NULL,0,
(LPTHREAD_START_ROUTINE)funclist[m_nCurFunc],
m_ptr,0,
NULL);
}
//----------------------------------------------------------------------------
//Procedure:
// FuncEndupTest(void)
//Description:
// Check if function is finished
//Input:
// None.
//Output:
// true or false
//
bool CFuncDlg::FuncEndupTest()
{
DWORD dwExitCode;
while (WaitForSingleObject(m_hFunThread,0)==WAIT_OBJECT_0) //The state of the specified object is signaled.
{
GetExitCodeThread (m_hFunThread,&dwExitCode); //This function retrieves the termination status
//of the specified thread
CloseHandle(m_hFunThread);
m_nCurFunc++; //A abnormal handle section
if(m_bStopOnFristError&&!(dwExitCode&0xff))
{
for(int i=m_nCurFunc;i<m_nfunccount;i++)
="" logresult(stoponfirsterror);
="" sendmessage(m_hptr,="" wm_close,0,="" 0);
="" return="" true;
="" }
="" decide="" whether="" all="" the="" functions="" have="" complished,="" and="" do="" some="" handle="" actions
="" if(m_ncurfunc<m_nfunccount="" )
="" functionstart();
="" else
="" false;
}<="" small="">
|
|
|
|
|
I do not understand your question. However If you want to know how to run the code that you give the problem is that it is not a complete program. It is MFC code but you need the rest of the code and resources to compile it.
John
|
|
|
|
|
By "run the codes" do you mean "how to compile the code?"
|
|
|
|
|
This is a multi-thread programming. I list only the main codes not all.
I want to know the progress of performing.
Sorry, my English is not good.
Thanks.
|
|
|
|
|
The "process of performing" what?
|
|
|
|
|
When the executable file are executed there are several steps: for example,
first run to line 34, then line 55-78 are executed, after this a function block are executed, ..., at last the window is destroyed. Of course, there maybe are some messages to be handled during the time.
I want to know the function's inter-calling way.
Sorry, I have confused you.
|
|
|
|
|
Hi All,
I am developing an application for Windows 2000/XP using VC++.I want to make a complete copy of
"Current Controls Set" in my application. (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet) to
another key in HKEY_LOCAL_MACHINE.
For copying the key I referred http://www.codeproject.com/system/registrykeycopy.asp code.
The program is working perfectly fine. But when i try to copy the CurrentControlSet key, it
copies all the keys except the "Enum key".
I think there is some security reason behind this. If this is so, then can anybody please suggest
a way to copy this key also.
Or alternatively is there any other way to copy this whole key including Enum key.
Please suggest!
Rohit
|
|
|
|
|
On many XP machines, our software is displayed with its view’s truncated. I have looked at the Control Panel / Accessibility Options and everything seems correct. (No vision related properties are checked.)
I can correct the problem by running the Accessibility Wizard. I just run the Wizard, clicking on NEXT for everything – I change no options. This process fixes the problem 100% of the time.
My guess is this process of running the Accessibility Wizard is doing something to the registry. But what is it doing? How can I find out what the Wizard does?
Thanks
|
|
|
|
|
Hello all,
This should be real simple, just don't know where to start. Basically I need to create from an application a web page and post it on my web site. How can I do this?
thanks
Ralph Krausse
|
|
|
|
|
Hello everybody,
Here is my problem.
I'm trying to display a dialog and in the Create() function I'm getting an assert error. I dig up through the debugger and I found out where I'm getting the assert error is in AfxGetResourceHandle(). Here is my code:
int APIENTRY WinMain(HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nCmdShow)
{
CMainDlg *mainDlg = new CMainDlg();
BOOL bRet = mainDlg->Create(IDD_MAIN_DIALOG, NULL);
if (bRet != 0)
{
mainDlg->ShowWindow(SW_SHOW);
}
else if(bRet == 0)
{
AfxMessageBox("Error Creating Dialog");
}
return 0;
}
As you noticed, all I'm trying to do is to display a dialog. Is there anything that I have to set in advance before I create the dialog and display it? Any answer is more than welcome.
Best regards,
Luis E. Cuadrado
)
|
|
|
|
|
It has been a long time since I have done MFC, but since you have replaced MFCs WinMain, it has been unable to initialize.
What you should have done is display your dialog from the InitInstance method of your CApplication class.
Tim Smith
I'm going to patent thought. I have yet to see any prior art.
|
|
|
|
|
Have you stepped through the Create() code to see why afxCurrentResourceHandle is still NULL?
|
|
|
|
|
Hi DavidCrow,
Yes, I stepped through the Create() code. The assertion is comming in the AfxFindResourceHandle() function. I included the portion of the code where the assert error comes and I pointed out where the assert error occurs. Aparently the value pModuleState->m_bSystem returned by AfxGetModuleState() is causing the assert error. Here is the code.
HINSTANCE AFXAPI AfxFindResourceHandle(LPCTSTR lpszName, LPCTSTR lpszType)
{
ASSERT(lpszName != NULL);
ASSERT(lpszType != NULL);
HINSTANCE hInst;
AFX_MODULE_STATE* pModuleState = AfxGetModuleState();
if (!pModuleState->m_bSystem)
{
hInst = AfxGetResourceHandle();
if (::FindResource(hInst, lpszName, lpszType) != NULL)
return hInst;
}
.
.
.
I hope this helps. Before I forget, thanks for your reply David
Luis E. Cuadrado
)
|
|
|
|
|
Technically, the assertion is being fired within the inline function AfxGetResourceHandle(), which, in this case, is being called by AfxFindResourceHandle(). Have you tried Tim's suggestion? I've never tried creating an MFC application without the other supporting pieces in place.
|
|
|
|
|
I'm going to try Tim's suggestion. As soon as I find something, I will post back the results.
Thanks for your replys.
Luis E.
Luis E. Cuadrado
)
|
|
|
|
|
Simple. In order to use MFC you must initialise it first.
if(!AfxWinInit(::GetModuleHandle(NULL), NULL, ::GetCommandLine(), 0))
{
return 1;
}
Then your MFC operations will work as normal  . You don't need to call any cleanup functions at the end.
Ryan
Being little and getting pushed around by big guys all my life I guess I compensate by pushing electrons and holes around. What a bully I am, but I do enjoy making subatomic particles hop at my bidding - Roger Wright (2nd April 2003, The Lounge)
Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late - John Nichol "Point Of Impact"
|
|
|
|
|
I use SHChangeNotifyRegister api to monitor the filesystem notification.
But I find when I copy a lot of files(>=20),The number of the posted notification: SHCNE_CREATE not equals to the number of the files. the Shell allways post about 10 SHCNE_CREATE notification, then follow a SHCNE_UPDATEITEM notification, This is not the acion I need.
Does anything wrong. But If the number of files to copy is less than 10,All is right.
How to do? help!!!
|
|
|
|
|
What value are you using for fSources?
|
|
|
|
|
(0x0001 | 0x0002 | 0x1000)
any wrong?
|
|
|
|
|
Looks fine. The shell also only has a 10-item event buffer, and may replace some events with a generic SHCNE_UPDATEDIR in case of an overflow. In short: don't depend on these notifications for any mission-critical applications.
|
|
|
|
|
SHChangeNotifyRegister(hWnd, SHCNF_ACCEPT_INTERRUPTS | SHCNF_ACCEPT_NON_INTERRUPTS | 0x1000,
SHCNE_CREATE | SHCNE_DELETE | SHCNE_RENAMEITEM | SHCNE_UPDATEITEM |
SHCNE_MKDIR | SHCNE_RMDIR | SHCNE_RENAMEFOLDER | SHCNE_UPDATEDIR |
SHCNE_NETSHARE | SHCNE_NETUNSHARE | SHCNE_FREESPACE,
WM_SHELLNOTIFY,
1, pEntry);
pEntry pointer to a special directory, such as "C:\\test"(use pidl).
|
|
|
|
|
But the explorer looks work fine, why it can do this?
Has there any method to repair this action?
|
|
|
|
|
zmnie wrote:
But the explorer looks work fine, why it can do this?
How do you know this? How can you tell that it is receiving more than 10 notifications?
|
|
|
|
|
I copy files to a folder, there are thousands files in that folder.
If flush the display of this folder, it will take mostly 2 second and cpu usage maybe nearly 100%.
But I find the cpu usage of explorer is only 10%, and last no more than 1 second, and the display is right, how do you thant about it?
|
|
|
|
|
Hi there,
I am trying to write a parser for a stream of data coming in my serial port. Does anyone know of a good article/site that gives info about writing/theory of parsing data streams.
thanks
A
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
