Re: Want to change the Validation attribute at runtime ASP.Net MVC - C# Discussion Boards

Re: SelectedIndex doesn't work with the SelectionChanged event handler but it works with the ButtonClick event handler.

Richard Deeming7-Aug-18 4:57

Richard Deeming

7-Aug-18 4:57

OriginalGriff wrote:
public, private, protected, internal, or protected internal

Don't forget the new private protected[^] option. Smile | :)

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: SelectedIndex doesn't work with the SelectionChanged event handler but it works with the ButtonClick event handler.

Member 1384637619-Aug-18 3:28

Member 13846376

19-Aug-18 3:28

Thank you all for help, everything worked out, I just had to sit through some toutorials, books and webpages. The program is finished and it's all looking very pretty and realiable.

Now though, I have a very annoying thing about C# to complain about, and I need to ask for some tip on how to handle it properly using some good C# practices...

I have a lot of arithmetic calculations to be solved in the program, and they return wrong values if I don't explicitly specify that a number 2 is a double and not an integer...... For example:

double number =  (double) 6 / (double) 10;
box_d.Text = number.ToString("F3") + " cm"; //returns 0.600 (correct) 
//the funny thing is, the program shows a suggestion that (double) here is an unnecessary cast........

double number =  6 / 10;
box_d.Text = number.ToString("F3") + " cm"; //returns 0.000 (WRONG AS F.)

and on top of that, all future calculations based on this result are also wrong, it's not the fault of the ToString() method. The variable is just wrong!

I mean... I don't mind parsing values like 0.5 as 0.500000019747272 etc. But Having 6/10 display as 0 instead of 0.6 is just so stupid, is there any logical reason for it to be like this? I understand that the program is trying to fit the result into an integer, but I explicitly state that my result must be double... I thought it's supposed to reduce the amount of memory used by the program if I set such simple numbers as integers, but if this kind of errors occur, is it even worth it? What is the good practice to work around this thing?

Should I never define any simple numbers like "2" or "8" as integers but use only "double" for everything?

modified 19-Aug-18 9:58am.

Re: SelectedIndex doesn't work with the SelectionChanged event handler but it works with the ButtonClick event handler.

Richard Deeming20-Aug-18 7:52

Richard Deeming

20-Aug-18 7:52

The problem you have is that you're dividing two integers, so the result will be truncated to an integer before the result is stored in your variable.

Only one of the casts is unnecessary; if either the numerator or denominator is a floating-point type, the other will be converted to that type before the division takes place.

You can simplify your code by using a numeric suffix:

double keyword (C# Reference) | Microsoft Docs[^]:
However, if you want an integer number to be treated as double, use the suffix d or D, for example:
double x = 3D;

So in your example:

double number = 6D / 10D;

There are other suffixes you can use to denote other numeric types:
C# - Numeric Suffixes - Stack Overflow[^]

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Want to change the Validation attribute at runtime ASP.Net MVC

indian1433-Aug-18 7:57

indian143

3-Aug-18 7:57

Hi all friends,

I have a Model which is needed to have different validation attributes assigned to it in different Conditions, I don't have to create multiple classes for different attributes, because the same model class is being used in multiple post methods.

Following is my class:

    public class ServiceFunctionCategoryLKP
    {
        public int Id { get; set; }

        [Required(ErrorMessage = "Code is required.")]
        [StringLength(2, MinimumLength = 2, ErrorMessage = "The field {0} length must be at least 2.")]
        public string Code { get; set; }

        [Required(ErrorMessage = "Description is required.")]
        public string Description { get; set; }

        public string ServiceFunctionCategoryCode { get; set; }

        [Required(ErrorMessage = "ModeOfServiceCode is required.")]
        public string ModeOfServiceCode { get; set; }
        public string ModeOfServiceDescription { get; set; }
        public int CodeLenth {get; set;}
    }

StringLength attribute should be different for different calls, is there any way I can have set it differently or dynamically depending upon the input object of the action method. Means I have a field in my input object as above called CodeLength, depending upon this field I have to change the StringLength attributes MinimumLength and Error message properties dynamically, it means in every different Post call, it could be different depending upon the CodeLength field value.

If I have tried in the following way, with IsValid method, problem is how would I know CodeLength field (that is coming as a property of Object in action method) within IsValid method to compare the length of the field with CodeLength field.

public override bool IsValid(object value)
{
    int num = (value == null) ? 0 : ((string)value).Length;
    return value == null || (num >= this.MinimumLength && num <= this.MaximumLength);
}

Any help would be greatly greatly helpful, thanks in advance friends.

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

-- modified 3-Aug-18 14:31pm.

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Gerry Schmitz3-Aug-18 9:18

Gerry Schmitz

3-Aug-18 9:18

"Baked in" at compile time, apparently.

Might try overriding the properties in question with a derived class for each of the "different conditions".

"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal

Re: Want to change the Validation attribute at runtime ASP.Net MVC

indian1433-Aug-18 10:17

indian143

3-Aug-18 10:17

can you please give me some example or something please?

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Richard Deeming3-Aug-18 10:21

Richard Deeming

3-Aug-18 10:21

Not easily, but it can be done.

You're going to need to create a custom DataAnnotationsModelValidatorProvider, and modify the rules it returns.
validation - Possible to change Data Annotations during Runtime? (ASP.NET MVC's [Range] [Required] [StringLength] etc.) - Stack Overflow[^]

Eg:

public class CustomModelValidatorProvider : DataAnnotationsModelValidatorProvider
{
    protected override IEnumerable<ModelValidator> GetValidators(ModelMetadata metadata, ControllerContext context, IEnumerable<Attribute> attributes)
    {
        if (metadata.Model is ServiceFunctionCategoryLKP model && metadata.PropertyName == nameof(model.Code) && model.CodeLength >= 0)
        {
            var newAttributes = new List<Attribute>(attributes);
            var stringLength = newAttributes.OfType<StringLengthAttribute>().FirstOrDefault();
            if (stringLength != null)
            {
                newAttributes.Remove(stringLength);
                
                if (model.CodeLength != 0)
                {
                    newAttributes.Add(new StringLengthAttribute(model.CodeLength)
                    {
                        MinimumLength = model.CodeLength, 
                        ErrorMessage = $"The field {{0}} length must be at least {model.CodeLength}."
                    });
                }
                
                attributes = newAttributes;
            }
        }
        
        return base.GetValidators(metadata, context, attributes);
    }
}

ModelValidatorProviders.Providers.Clear();
ModelValidatorProviders.Providers.Add( new CustomValidatorProvider() );

NB: You're effectively allowing the user to override the validation rule by modifying a hidden field on the page. As a result, the validation can't really be trusted.

It would be better to create a separate model class for each required code length.

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: Want to change the Validation attribute at runtime ASP.Net MVC

indian1433-Aug-18 11:16

indian143

3-Aug-18 11:16

Just checking, is it going to remove all the other Validations that I have put on other classes?

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Richard Deeming3-Aug-18 12:14

Richard Deeming

3-Aug-18 12:14

No. It checks that the instance being validated is the specific model class; that the property being validated is the Code property; and it only replaces the StringLength validator on that property.

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: Want to change the Validation attribute at runtime ASP.Net MVC

indian1433-Aug-18 12:48

indian143

3-Aug-18 12:48

Hi Richard,

One last thing, I have created the method in the following way:

    public class CustomModelValidatorProvider : System.Web.Mvc.DataAnnotationsModelValidatorProvider
    {
        protected override IEnumerable<System.Web.Mvc.ModelValidator> GetValidators(System.Web.Mvc.ModelMetadata metadata, ControllerContext context, IEnumerable<Attribute> attributes)
        { 
            if (metadata.Model is LookupTable)
            {
                LookupTable model = metadata.Model as LookupTable;

                if (metadata.PropertyName == GetPropertyName(() => model.CodeLength) && (model.CodeLength > 0))
                {
                    var newAttributes = new List<Attribute>(attributes);
                    var stringLength = newAttributes.OfType<StringLengthAttribute>().FirstOrDefault();
                    if (stringLength != null)
                    {
                        newAttributes.Remove(stringLength);

                        if (model.CodeLength != 0)
                        {
                            newAttributes.Add(new StringLengthAttribute(model.CodeLength)
                            {
                                MinimumLength = model.CodeLength,
                                ErrorMessage = @"The field {{0}} length must be at least {model.CodeLength}."
                            });
                        }

                        attributes = newAttributes;
                    }
                }
            }            

            return base.GetValidators(metadata, context, attributes);
        }

        public string GetPropertyName<T>(Expression<Func<T>> propertyLambda)
        {
            var me = propertyLambda.Body as MemberExpression;

            if (me == null)
            {
                throw new ArgumentException("You must pass a lambda of the form: '() => Class.Property' or '() => object.Property'");
            }

            return me.Member.Name;
        }
    }

can you please let me know how can I decorate or use it on my Model class, can you please give me that example, I am asking this question because this value is coming as null: metadata.PropertyName, so I am not able to compare with property name. So any help please?

thank you very very much buddy - as I said earlier have a Wonderful weekend with family and friends buddy.

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

-- modified 3-Aug-18 19:53pm.

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Richard Deeming6-Aug-18 2:05

Richard Deeming

6-Aug-18 2:05

You register the provider in Global.asax.cs:

ModelValidatorProviders.Providers.Clear();
ModelValidatorProviders.Providers.Add( new CustomValidatorProvider() );

I'd expect to see the PropertyName set to null for the class-level validation, but I'd expect the method to be called again for each property on the class.

You're currently checking whether the validators are for the CodeLength property; you need to customise the validators for the Code property instead.

if (metadata.PropertyName == GetPropertyName(() => model.Code) && ...

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: Want to change the Validation attribute at runtime ASP.Net MVC

indian1436-Aug-18 6:39

indian143

6-Aug-18 6:39

ModelValidatorProviders.Providers.Clear();
ModelValidatorProviders.Providers.Add( new CustomValidatorProvider() );

I did this registration in the Global.asax.cs file, in the Application_Start() event.

And even if I changed the Condition to:

if (metadata.PropertyName == GetPropertyName(() => model.Code) && (model.CodeLength > 0))

Still I am getting the metadata.PropertyName null always, can you please suggest me what am I missing?

Just asking am I using any wrong namespace in references?, Because it was saying there is an ambiguous class names and those classes present in both the following namespaces using System.Web.ModelBinding; using System.Web.Mvc;
Am I using any wrong namespace or something like that kind of error, I am not understanding why is it giving metadata.PropertyName as null in all the cases?

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

-- modified 6-Aug-18 13:01pm.

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Richard Deeming6-Aug-18 7:15

Richard Deeming

6-Aug-18 7:15

Sorry, I picked the wrong property to test against. Replace metadata.Model with metadata.Container:

if (metadata.Model is ServiceFunctionCategoryLKP model && metadata.PropertyName == nameof(model.Code) && model.CodeLength >= 0)

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: Want to change the Validation attribute at runtime ASP.Net MVC

indian1436-Aug-18 7:32

indian143

6-Aug-18 7:32

But still the attributes value in IEnumerable<attribute> attributes coming as null when I already have one Attribute on that class and when I try to expan the attributes collection object, it shows me "Enumeration yielded no results" in the end.

    public class LookupTable
    {
        public int Id { get; set; }

        [Required(ErrorMessage = "Code is required.")]<br />
        public string Code { get; set; }

        [Required(ErrorMessage = "Description is required.")]
        public string Description { get; set; }
        public int? ForeignKeyId { get; set; }
        public string ForeignKeyValue { get; set; }
        public DateTime? CreatedDate {get;set;} 
        public string CreatedBy {get;set;}       
        public int CodeLength { get; set; }
    }

Do I need to add anymore Attributes to the Code Property?, what am I missing here my friend?

Even after I changed my function to have Container instead of Model, still I get null at metadata.PropertyName

Always metadata.PropertyName is coming as null irrespective of any changes I do at if (metadata.PropertyName == GetPropertyName(() => model.Code) && (model.CodeLength > 0))
in the below function and attributes is also coming as null.

        protected override IEnumerable<System.Web.Mvc.ModelValidator> GetValidators(System.Web.Mvc.ModelMetadata metadata, ControllerContext context, IEnumerable<Attribute> attributes)
        { 
            if (metadata.Model is LookupTable)
            {
                LookupTable model = metadata.Container as LookupTable;                

                if (metadata.PropertyName == GetPropertyName(() => model.Code) && (model.CodeLength > 0))
                {
                    var newAttributes = new List<Attribute>(attributes);
                    var stringLength = newAttributes.OfType<StringLengthAttribute>().FirstOrDefault();
                    if (stringLength != null)
                    {
                        newAttributes.Remove(stringLength);

                        if (model.CodeLength != 0)
                        {
                            newAttributes.Add(new StringLengthAttribute(model.CodeLength)
                            {
                                MinimumLength = model.CodeLength,
                                ErrorMessage = @"The field {{0}} length must be at least {model.CodeLength}."
                            });
                        }

                        attributes = newAttributes;
                    }
                }
            }            

            return base.GetValidators(metadata, context, attributes);
        }

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Richard Deeming6-Aug-18 9:16

Richard Deeming

6-Aug-18 9:16

I don't know what to suggest. I've tested the code, and it works. Confused | :confused:

If you're not putting a static StringLength attribute on the property, you'll need to the if (model.CodeLength != 0) block outside of the if (stringLength != null) block:

if (stringLength != null)
{
    newAttributes.Remove(stringLength);
}

if (model.CodeLength != 0)
{
    newAttributes.Add(new StringLengthAttribute(model.CodeLength)
    {
        MinimumLength = model.CodeLength,
        ErrorMessage = @"The field {{0}} length must be at least {model.CodeLength}."
    });
}

attributes = newAttributes;

But if you're never seeing a value in metadata.PropertyName, then there's something else going on.

I assume you have actually enabled unobtrusive validation?

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: Want to change the Validation attribute at runtime ASP.Net MVC

indian1436-Aug-18 10:12

indian143

6-Aug-18 10:12

No I have not done this: unobtrusive validation, can you please let me know how to do it only on one particular class and property that I want.

Thanks,

Abdul Aleem

"There is already enough hatred in the world lets spread love, compassion and affection."

Re: Want to change the Validation attribute at runtime ASP.Net MVC

Richard Deeming7-Aug-18 1:56

Richard Deeming

7-Aug-18 1:56

You enable unobtrusive validation for the site in the web.config file:

XML

<configuration>
    <appSettings>
        <add key="ClientValidationEnabled" value="true"/>
        <add key="UnobtrusiveJavaScriptEnabled" value="true"/>

This should be included by default, but it depends on the template you started with.

Creating a MVC 3 Application with Razor and Unobtrusive JavaScript ⇒ Enabling Client-Side Validation[^]

I've created a minimal sample project in VS2017 which works as expected; you can download it from OneDrive[^].

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

When inputting data form main one other always on form main ?

Member 24584672-Aug-18 21:29

Member 2458467

2-Aug-18 21:29

Suppose there are two forms: frmMain and frmPopup, frmPopup is always on frmMain, when select frmMain inputting data then frmPopup always on frmMain, frmPopup is always on frmMain, how is it to write code ? you see attach file http://www.mediafire.com/view/bq32fcb3ept329r/PopUpInput.jpg/file

Re: When inputting data form main one other always on form main ?

Richard MacCutchan2-Aug-18 21:40

Richard MacCutchan

2-Aug-18 21:40

Assuming that frmPopup is a dialog, you should only show it when you need to use it to communicate something to the user. Use the Form.ShowDialog() method so it does not stay on screen.

Re: When inputting data form main one other always on form main ?

OriginalGriff2-Aug-18 21:45

OriginalGriff

2-Aug-18 21:45

Set the popup forms TopMost property to true and use the Form.Show method instead of Form.ShowDialog

That way, it'll "float" above Form1, and you will still be able to enter data in the Form1 Textbox.

Sent from my Amstrad PC 1640
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!

Re: When inputting data form main one other always on form main ?

Member 24584675-Aug-18 16:42

Member 2458467

5-Aug-18 16:42

thank you very much.

Re: When inputting data form main one other always on form main ?

OriginalGriff5-Aug-18 19:35

OriginalGriff

5-Aug-18 19:35

You're welcome!

Sent from my Amstrad PC 1640
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!

Re: When inputting data form main one other always on form main ?

BillWoodruff3-Aug-18 2:17

BillWoodruff

3-Aug-18 2:17

You can set the 'Owner property of the pop-up Form to be the first Form ... which I assume is the Main Form. That will guarantee that when you show the pop-up, it will remain "above" the Main Form.

To get further assistance, I suggest you describe what your goal is in more detail: what is the relation of data the user enters on the Main Form to the what is displayed on the pop-up Form ?

«... thank the gods that they have made you superior to those events which they have not placed within your own control, rendered you accountable for that only which is within you own control For what, then, have they made you responsible? For that which is alone in your own power—a right use of things as they appear.» Discourses of Epictetus Book I:12

Jeremiah Okoduwa2-Aug-18 0:51

Jeremiah Okoduwa

2-Aug-18 0:51

As a beginner in CSharp, how do i differentiate between a class and a method. Thanks

Re: C#

Daniel Pfeffer2-Aug-18 1:12

Daniel Pfeffer

2-Aug-18 1:12

A class contains constructors, members, properties, and methods.

For example:

class Complex
{
    private double real;                // member #1
    private double imag;                // member #2

    // Constructors
    public Complex()
    {
        real = 0.0;
        imag = 0.0;
    }

    public Complex(double x)
    {
        real = x;
        imag = 0.0;
    }

    public Complex(double x, double y)
    {
        real = x;
        imag = y;
    }

    // property
    public double Real { get; set; }

    // method
    public double norm()
    {
        return real * real + imag * imag;
    }
};

Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.