|
Chris Losinger wrote:
while you can't pass a FILE* out.
why not?
So the DLL code isn't yours and thus can't be changed or it is yours and you don't want to change it because ...
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
Neville Franks wrote:
why not?
because the DLL and the EXE will be using different copies of the CRT.
-c
I'm not the droid you're looking for.
|
|
|
|
|
Chris Losinger wrote:
because the DLL and the EXE will be using different copies of the CRT.
So? I assume the DLL opens the file with fopen, the returned FILE* points to memory in the .EXEs heap, in which case it can happilly use it. Or am I missing something fundamental here.
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
Neville Franks wrote:
Or am I missing something fundamental here
each CRT copy has its own table of file handles, these are not shared between modules. so if you fopen a file in a DLL and get a FILE * of "53", that will probably not correspond to anything meaningful in your EXEs file handle table.
the HANDLE that comes from a CreateFile, however, is maintained by the OS, not the CRT, so you can share that between modules without problems.
-c
I'm not the droid you're looking for.
|
|
|
|
|
I've looked in the VC++ fopen docs and can't see anything about each CRT instance getting it's own table. Looking at the CRT code it uses _malloc_crt() to allocate a stream object.
I don't understand why you would be using the file handle anyway. Surely you just pass the FILE* back to some DLL function to read/write. And if the CRT is in a DLL why is their another "handle table" in the .EXE.
Have you actually proved there is a problem with fopen et.all.?
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
Neville Franks wrote:
Have you actually proved there is a problem with fopen et.all.?
yes, a 2 minute DLL project can prove this:
in a DLL:
typedef struct strct_t
{
FILE *fp;
} strct;
void __stdcall OpenAFile(strct * theStruct)
{
theStruct->fp = fopen("c:\\autoexec.bat", "r");
}
in the EXE:
strct s;
OpenAFile(&s);
fclose(s.fp);
it crashes in the fclose.
Neville Franks wrote:
Looking at the CRT code it uses _malloc_crt() to allocate a stream object.
and then it associates one of the entries in the __piob array to the stream. this array is global to the CRT instance (look in crt\src\_file.c).
a quick skip through Google will show dozens of instances of this problem. and the answer is always "use CreateFile" or "link to a shared CRT". unfortunately, the second is not an option for me, either.
the problem is really: how to make ReadFile/WriteFile behave in a manner worthy of being the low-level file operation on a modern OS?
-c
I'm not the droid you're looking for.
|
|
|
|
|
Chris Losinger wrote:
"link to a shared CRT". unfortunately, the second is not an option for me, either.
I missed the shared CRT bit. Guess I lead you down the wrong track. Sorry about that.
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
Have you tried using the FILE_FLAG_SEQUENTIAL_SCAN flag?
fileHandle = CreateFile(pFileName, GENERIC_READ,
FILE_SHARE_READ, NULL, OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL | FILE_FLAG_SEQUENTIAL_SCAN, NULL);
|
|
|
|
|
i tried it. but there was no real difference (i stopped it at the 10x point, instead of letting it get to the 12x mark).
-c
I'm not the droid you're looking for.
|
|
|
|
|
I took a one-minute glance through fwrite() and it does its own buffering, thus explaining the speed difference. If you can pre-calculate the amount of data you'll be writing, and that amount isn't huge, put it all into a memory-mapped file. That way you can use the same APIs but everything will be in memory.
--Mike--
If it doesn't move and it should: WD-40. If it moves and it shouldn't: duct tape.
1ClickPicGrabber - Grab & organize pictures from your favorite web pages, with 1 click!
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
but i would also have to duplicate the buffering for seek, tell, read, eof, etc.. it'd be far far far too much work (which means more chances for bugs).
too bad.
-c
I'm not the droid you're looking for.
|
|
|
|
|
Chris Losinger wrote:
fwrite, fread and friends are easily many times faster than WriteFile, ReadFile and friends, when doing lots of small reads and writes.
Expected. The Win32 functions need to (among other things) do user->kernel->user mode transitions, which is horribly slow in IA32. The stdio functions perform buffering all in user-mode (no context switch until the buffer is full), and you can even increase the buffer with setvbuf (disregard any Micros~1 documentation lying to you that you can only use 32KB buffers - the buffer can be all the memory you can give it. Probably they haven't bothered to update the documentation from the ~1990 MS-DOS CRT limits).
If you are only given a file HANDLE (from e.g. a DLL) and want faster stdio functions, you should have a look at _open_osfhandle. That should put you on the right track.
|
|
|
|
|
Mike Nordell wrote:
_open_osfhandle
thanks for the tip.
open_osfhandle gives me a low-level, non-buffered, I/O handle. so, that doesn't buy me anything. i can use fdopen on that handle to get a stream I/O handle, but i haven't figured out how to detach the stream handle from the I/O handle when i'm done.
it's a nightmare 
-c
I'm not the droid you're looking for.
|
|
|
|
|
I created a NON doc/view MDI application using the MFC ClassWizard (or whatever it's called in .NET) and I don't know where to place the code for some edit fields I want to put in the MDI Child Windows. I put it in the OnCreate() function but it didn't work. Help!
-- Steve
|
|
|
|
|
Is it possible to generate a lib file from a DLL? I downloaded a DLL and it only comes with a def file. I would like to use the DLL the easy by including the lib for the DLL at compile time?
I could recompile the DLL source, but would prefer to use some tool to generate a lib file from the existing DLL
Thanks!
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
|
If you've got a DSP for it then add this to your project and make it a dependancy of the project. That's the easiest way. VC++ will do the rest.
I think there is a utility to create a lib, but I can't think what it is just now.
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
Neville Franks wrote:
If you've got a DSP
Nope
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
|
Hockey wrote:
Neville Franks wrote:
If you've got a DSP
Nope
Should be easy enough to just create a nice new one and whack all the files into it.
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
IMPLIB used to do it for Win16.
maybe this can help:
http://www.geocities.com/SiliconValley/5806/download.htm#IMPLIB
-c
I'm not the droid you're looking for.
|
|
|
|
|
Cool...i'll check it out
Thanks!
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
|
I know for sure the VC4.2 linker could do it. I don't know if they removed the option from later linkers (quite possible, since it was something useful).
Anyway, it went something like
link /def:foo.def foo.dll
and voila, an import .lib was generated.
|
|
|
|
|
hi all,
I have MDI app. whish has 1 document 3 view objects. I'll display three different graphical scenes in each window. So I modified view classes (CView1, CView2, CView3) in order to use opengl... I setup pixel formet get rendering context, make current etc...
if I modify only one view class app. works (only one view displays graphical scene), BUT if I modify 2 or all view classes for opengl, app. locks when I make full screen. If I comment wglMakeCurrent line app. doesnt lock. What's the problem with wglMakeCurrent..
if((::wglMakeCurrent(m_pDC->GetSafeHdc(), m_hRC))==false)
{
MessageBox("Cant make rend. context current");
return false;
}
If wglMakeCurrent runs in one view everthing is OK, But if all views run wglmakecurrent it crashes when I make fullscreen? I guess that all of the rendering contexts cant be made current at the same time, but why doesnt it crash when working in non-fullscreen mode..
I want to know what wglMakeCurrent exactly does? And why it crashes when I make fullscreen?
a second question:
Is there a tool that I can draw geometrical objects (2d or 3d) and tool creates opengl code for the objects?
sorry It was a long post but my english is this enough
|
|
|
|
|
You should probably refer to the excellent article CGLEnabledView - An MDI view class supporting OpenGL
[^],you will find useful info into.
wglMakeCurrent associates/de-associates the OpenGL rendering context to the Win32 device context.
Sometimes with OpenGL the problem comes not from the code, but from the implementation of OpenGL in the video card, that's why I would advise to test the application on different computers using different video cards.
I've no idea about your second question, but if you find such a tool, I would be happy to know it, TIA !
HTH,
K.
One small village of indomitable geeks still holds out against the invaders. And life is not easy for the managers legionaries who garrison the fortified camps of Microsoftum, Javum, Ceplumplum and Vebasum
|
|
|
|
|
thanks for the link..
and I found a program named Deep Exploration that can convert 3d studio or other files to opengl source
www.righthemisphere.com
|
|
|
|
|
hey everyone... whats the difference between managed c++ and regular c++??
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
