C / C++ / MFC

FirstPrevNext

Re: About "Ctrl + ALT + DEL" Michael Dunn29-Oct-01 21:23 Michael Dunn 29-Oct-01 21:23  You can't. The point of C-A-D is that it's secure because nothing can intercept it. --Mike-- http://home.inreach.com/mdunn/ This posting is provided "as was" with no warranties, guarantees, lotteries, or any of those little bags of peanuts you get on planes. You assume all risk for crossing the street without holding mommy's hand. © 2001 Mike's Classy Software. Member FDIC. If rash develops, discontinue use. your with and Re: About "Ctrl + ALT + DEL" 29-Oct-01 22:22 29-Oct-01 22:22  Yes, you can intercept Ctrl-Alt-Del on Windows NT & Windows 2000. 2 ways to do that: . you can code your own gina.dll (this DLL is used to manage logon authentification). You can replace the original DLL with the registry key local_machine\microsoft\windows nt\winlogon\GinaDLL = mygina.dll (your dll must be in the system32 directory). You can find help at : http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/winlogon_portal_2hb9.asp or you can use this source: http://wwwthep.physik.uni-mainz.de/~frink/newgina_pre09/readme.html The best way is to code a filter dll which loads the original one, and block the ctrl-alt-del event (in WlxLoggedOnSAS function) by returning WLX_SAS_ACTION_NONE. Be carreful because, if Windows doesn't find your dll or if you have a bug inside, your system will be blocked. This method works very well, but you'll have a flash when ctrl-alt-del will occur. It's a detail but we'll find the perfect code... . your can also code a driver which intercept keyboard event (with msgkeybfilter i think ?). In this case, no flash when you press ctrl-alt-del (i tested a software which uses this method and it completely block the ctrl-alt-del (no flash here !)). Good luck ! Re: About "Ctrl + ALT + DEL" 2-Nov-01 14:01 2-Nov-01 14:01  You can use the driver ctrl2cap from www.sysinternals.com. It switch change capslock key to left control key, but you can easily change the code to block ctrl-alt-del combination. Re: About "Ctrl + ALT + DEL" Deepak Khajuria29-Oct-01 22:03 Deepak Khajuria 29-Oct-01 22:03  I think the only way is to write a GINA Dll. But that is a big task for small functionlity. Deepak Khajuria Text To Speech Control...... 29-Oct-01 18:31 29-Oct-01 18:31  Dear All, I have to add Microsoft Text to Speech control to my Win32 application. Please, help me how to add this control to my application Re: Text To Speech Control...... Michael P Butler30-Oct-01 2:30 Michael P Butler 30-Oct-01 2:30  You need the Microsoft Speech SDK to start with. Have you got this? There are plenty of samples available in it. If memory serves me the Text To Speech is a COM component. http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/msdn-files/027/000/781/msdncompositedoc.xml Michael Make/Compile file problem 29-Oct-01 16:02 29-Oct-01 16:02  Recently, i was asked to compiled hundred of source code files which consists of c, cpp, asm and dll file. The file was came along with several make and compile file. However, I have no idea on how to use visual studio c++ and masm to make use of "make/compile" file in order to produce the executable file. The below are some of the portion of make file and compile file. Please let me know how can i use them in order to produce the executable file. thanks ------ (xxx.mak) # Microsoft Developer Studio Generated NMAKE File, Format Version 4.00 # ** DO NOT EDIT ** # TARGTYPE "Win32 (x86) Application" 0x0101 !IF "$(CFG)" == "" CFG=Prime95 - Win32 Debug !MESSAGE No configuration specified. Defaulting to Prime95 - Win32 Debug. !ENDIF !IF "$(CFG)" != "Prime95 - Win32 Release" && "$(CFG)" !=\ "Prime95 - Win32 Debug" !MESSAGE Invalid configuration "$(CFG)" specified. !MESSAGE You can specify a configuration when running NMAKE on this makefile !MESSAGE by defining the macro CFG on the command line. For example: !MESSAGE !MESSAGE NMAKE /f "Prime95.mak" CFG="Prime95 - Win32 Debug" !MESSAGE !MESSAGE Possible choices for configuration are: !MESSAGE !MESSAGE "Prime95 - Win32 Release" (based on "Win32 (x86) Application") !MESSAGE "Prime95 - Win32 Debug" (based on "Win32 (x86) Application") !MESSAGE !ERROR An invalid configuration is specified. !ENDIF !IF "$(OS)" == "Windows_NT" NULL= !ELSE NULL=nul !ENDIF ################################################################################ # Begin Project # PROP Target_Last_Scanned "Prime95 - Win32 Debug" CPP=cl.exe RSC=rc.exe MTL=mktyplib.exe !IF "$(CFG)" == "Prime95 - Win32 Release" # PROP BASE Use_MFC 6 # PROP BASE Use_Debug_Libraries 0 # PROP BASE Output_Dir "Release" # PROP BASE Intermediate_Dir "Release" # PROP BASE Target_Dir "" # PROP Use_MFC 5 # PROP Use_Debug_Libraries 0 # PROP Output_Dir "Release" # PROP Intermediate_Dir "Release" # PROP Target_Dir "" OUTDIR=.\Release INTDIR=.\Release ALL : "$(OUTDIR)\Prime95.exe" "$(OUTDIR)\Prime95.hlp" CLEAN : -@erase ".\Release\Prime95.exe" -@erase ".\Release\AffinityDlg.obj" -@erase ".\Release\Prime95.pch" -@erase ".\Release\PreferencesDlg.obj" -@erase ".\Release\Prime95.obj" -@erase ".\Release\Prime95Doc.obj" -@erase ".\Release\StdAfx.obj" -@erase ".\Release\Priority.obj" -@erase ".\Release\EditDropFiles.obj" -@erase ".\Release\CpuDlg.obj" -@erase ".\Release\Prime95View.obj" -@erase ".\Release\TestDlg.obj" -@erase ".\Release\MainFrm.obj" -@erase ".\Release\ContentsDlg.obj" -@erase ".\Release\Prime95.res" -@erase ".\Release\Prime95.map" -@erase ".\Release\Prime95.hlp" "$(OUTDIR)" : if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" # ADD BASE CPP /nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /Yu"stdafx.h" /c # ADD CPP /nologo /MT /W3 /GX /Ot /Oi /Ob1 /Gf /Gy /I ".." /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /Yu"stdafx.h" /Gs /Gs /c CPP_PROJ=/nologo /MT /W3 /GX /Ot /Oi /Ob1 /Gf /Gy /I ".." /D "WIN32" /D\ "NDEBUG" /D "_WINDOWS" /D "_MBCS" /Fp"$(INTDIR)/Prime95.pch" /Yu"stdafx.h"\ /Fo"$(INTDIR)/" /Gs /Gs /c CPP_OBJS=.\Release/ CPP_SBRS= # ADD BASE MTL /nologo /D "NDEBUG" /win32 # ADD MTL /nologo /D "NDEBUG" /win32 MTL_PROJ=/nologo /D "NDEBUG" /win32 # ADD BASE RSC /l 0x409 /d "NDEBUG" /d "_AFXDLL" # ADD RSC /l 0x409 /d "NDEBUG" RSC_PROJ=/l 0x409 /fo"$(INTDIR)/Prime95.res" /d "NDEBUG" BSC32=bscmake.exe # ADD BASE BSC32 /nologo # ADD BSC32 /nologo BSC32_FLAGS=/nologo /o"$(OUTDIR)/Prime95.bsc" BSC32_SBRS= LINK32=link.exe # ADD BASE LINK32 /nologo /subsystem:windows /machine:I386 # ADD LINK32 ../prime95/mult.obj ../prime95/mult1.obj ../prime95/mult1aux.obj ../prime95/mult2.obj ../prime95/mult2a.obj ../prime95/mult2aux.obj ../prime95/mult3.obj ../prime95/mult3a.obj ../prime95/mult3aux.obj ../prime95/mult3auq.obj ../prime95/mult4.obj ../prime95/mult4a.obj ../prime95/mult4b.obj ../prime95/mult1p.obj ../prime95/mult2p.obj ../prime95/mult2ap.obj ../prime95/mult3p.obj ../prime95/mult3ap.obj ../prime95/mult4p.obj ../prime95/mult4ap.obj ../prime95/mult4bp.obj ../prime95/mult4aux.obj ../prime95/mult4auq.obj ../prime95/mult3q.obj ../prime95/mult3aq.obj ../prime95/mult4q.obj ../prime95/mult4aq.obj ../prime95/mult4bq.obj ../prime95/ecmhelp.obj ../prime95/xmult1.obj ../prime95/xmult1ax.obj ../prime95/xmult2.obj ../prime95/xmult2a.obj ../prime95/xmult2ax.obj ../prime95/xmult3.obj ../prime95/xmult3a.obj ../prime95/xmult3ax.obj /nologo /subsystem:windows /map /machine:I386 # SUBTRACT LINK32 /debug LINK32_FLAGS=../prime95/mult.obj ../prime95/mult1.obj ../prime95/mult1aux.obj\ ../prime95/mult2.obj ../prime95/mult2a.obj ../prime95/mult2aux.obj\ ../prime95/mult3.obj ../prime95/mult3a.obj ../prime95/mult3aux.obj\ ../prime95/mult3auq.obj ../prime95/mult4.obj ../prime95/mult4a.obj\ ../prime95/mult4b.obj ../prime95/mult1p.obj ../prime95/mult2p.obj\ ../prime95/mult2ap.obj ../prime95/mult3p.obj ../prime95/mult3ap.obj\ ../prime95/mult4p.obj ../prime95/mult4ap.obj ../prime95/mult4bp.obj\ ../prime95/mult4aux.obj ../prime95/mult4auq.obj ../prime95/mult3q.obj\ ../prime95/mult3aq.obj ../prime95/mult4q.obj ../prime95/mult4aq.obj\ ../prime95/mult4bq.obj ../prime95/ecmhelp.obj ../prime95/xmult1.obj\ ../prime95/xmult1ax.obj ../prime95/xmult2.obj ../prime95/xmult2a.obj\ ../prime95/xmult2ax.obj ../prime95/xmult3.obj ../prime95/xmult3a.obj\ ../prime95/xmult3ax.obj /nologo /subsystem:windows /incremental:no\ /pdb:"$(OUTDIR)/Prime95.pdb" /map:"$(INTDIR)/Prime95.map" /machine:I386\ /out:"$(OUTDIR)/Prime95.exe" LINK32_OBJS= \ "$(INTDIR)/AffinityDlg.obj" \ "$(INTDIR)/PreferencesDlg.obj" \ "$(INTDIR)/Prime95.obj" \ "$(INTDIR)/Prime95Doc.obj" \ "$(INTDIR)/StdAfx.obj" \ "$(INTDIR)/Priority.obj" \ "$(INTDIR)/EditDropFiles.obj" \ "$(INTDIR)/CpuDlg.obj" \ "$(INTDIR)/Prime95View.obj" \ "$(INTDIR)/TestDlg.obj" \ "$(INTDIR)/MainFrm.obj" \ "$(INTDIR)/ContentsDlg.obj" \ "$(INTDIR)/Prime95.res" "$(OUTDIR)\Prime95.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) $(LINK32) @<< $(LINK32_FLAGS) $(LINK32_OBJS) << !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" # PROP BASE Use_MFC 6 # PROP BASE Use_Debug_Libraries 1 # PROP BASE Output_Dir "Debug" # PROP BASE Intermediate_Dir "Debug" # PROP BASE Target_Dir "" # PROP Use_MFC 6 # PROP Use_Debug_Libraries 1 # PROP Output_Dir "Debug" # PROP Intermediate_Dir "Debug" # PROP Target_Dir "" OUTDIR=.\Debug INTDIR=.\Debug ALL : "$(OUTDIR)\Prime95.exe" "$(OUTDIR)\Prime95.hlp" CLEAN : -@erase ".\Debug\vc40.pdb" -@erase ".\Debug\Prime95.pch" -@erase ".\Debug\vc40.idb" -@erase ".\Debug\Prime95.exe" -@erase ".\Debug\Priority.obj" -@erase ".\Debug\CpuDlg.obj" -@erase ".\Debug\PreferencesDlg.obj" -@erase ".\Debug\TestDlg.obj" -@erase ".\Debug\Prime95.obj" -@erase ".\Debug\ContentsDlg.obj" -@erase ".\Debug\MainFrm.obj" -@erase ".\Debug\EditDropFiles.obj" -@erase ".\Debug\Prime95Doc.obj" -@erase ".\Debug\Prime95View.obj" -@erase ".\Debug\StdAfx.obj" -@erase ".\Debug\AffinityDlg.obj" -@erase ".\Debug\Prime95.res" -@erase ".\Debug\Prime95.ilk" -@erase ".\Debug\Prime95.pdb" -@erase ".\Debug\Prime95.hlp" "$(OUTDIR)" : if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" # ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /Yu"stdafx.h" /c # ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Ot /Oi /I ".." /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /D "GDEBUG" /Yu"stdafx.h" /c CPP_PROJ=/nologo /MDd /W3 /Gm /GX /Zi /Ot /Oi /I ".." /D "WIN32" /D "_DEBUG" /D\ "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /D "GDEBUG" /Fp"$(INTDIR)/Prime95.pch"\ /Yu"stdafx.h" /Fo"$(INTDIR)/" /Fd"$(INTDIR)/" /c CPP_OBJS=.\Debug/ CPP_SBRS= # ADD BASE MTL /nologo /D "_DEBUG" /win32 # ADD MTL /nologo /D "_DEBUG" /win32 MTL_PROJ=/nologo /D "_DEBUG" /win32 # ADD BASE RSC /l 0x409 /d "_DEBUG" /d "_AFXDLL" # ADD RSC /l 0x409 /d "_DEBUG" /d "_AFXDLL" RSC_PROJ=/l 0x409 /fo"$(INTDIR)/Prime95.res" /d "_DEBUG" /d "_AFXDLL" BSC32=bscmake.exe # ADD BASE BSC32 /nologo # ADD BSC32 /nologo BSC32_FLAGS=/nologo /o"$(OUTDIR)/Prime95.bsc" BSC32_SBRS= LINK32=link.exe # ADD BASE LINK32 /nologo /subsystem:windows /debug /machine:I386 # ADD LINK32 ../prime95/mult.obj ../prime95/mult1.obj ../prime95/mult1aux.obj ../prime95/mult2.obj ../prime95/mult2a.obj ../prime95/mult2aux.obj ../prime95/mult3.obj ../prime95/mult3a.obj ../prime95/mult3aux.obj ../prime95/mult3auq.obj ../prime95/mult4.obj ../prime95/mult4a.obj ../prime95/mult4b.obj ../prime95/mult1p.obj ../prime95/mult2p.obj ../prime95/mult2ap.obj ../prime95/mult3p.obj ../prime95/mult3ap.obj ../prime95/mult4p.obj ../prime95/mult4ap.obj ../prime95/mult4bp.obj ../prime95/mult4aux.obj ../prime95/mult4auq.obj ../prime95/mult3q.obj ../prime95/mult3aq.obj ../prime95/mult4q.obj ../prime95/mult4aq.obj ../prime95/mult4bq.obj ../prime95/ecmhelp.obj ../prime95/xmult1.obj ../prime95/xmult1ax.obj ../prime95/xmult2.obj ../prime95/xmult2a.obj ../prime95/xmult2ax.obj ../prime95/xmult3.obj ../prime95/xmult3a.obj ../prime95/xmult3ax.obj /nologo /subsystem:windows /debug /machine:I386 LINK32_FLAGS=../prime95/mult.obj ../prime95/mult1.obj ../prime95/mult1aux.obj\ ../prime95/mult2.obj ../prime95/mult2a.obj ../prime95/mult2aux.obj\ ../prime95/mult3.obj ../prime95/mult3a.obj ../prime95/mult3aux.obj\ ../prime95/mult3auq.obj ../prime95/mult4.obj ../prime95/mult4a.obj\ ../prime95/mult4b.obj ../prime95/mult1p.obj ../prime95/mult2p.obj\ ../prime95/mult2ap.obj ../prime95/mult3p.obj ../prime95/mult3ap.obj\ ../prime95/mult4p.obj ../prime95/mult4ap.obj ../prime95/mult4bp.obj\ ../prime95/mult4aux.obj ../prime95/mult4auq.obj ../prime95/mult3q.obj\ ../prime95/mult3aq.obj ../prime95/mult4q.obj ../prime95/mult4aq.obj\ ../prime95/mult4bq.obj ../prime95/ecmhelp.obj ../prime95/xmult1.obj\ ../prime95/xmult1ax.obj ../prime95/xmult2.obj ../prime95/xmult2a.obj\ ../prime95/xmult2ax.obj ../prime95/xmult3.obj ../prime95/xmult3a.obj\ ../prime95/xmult3ax.obj /nologo /subsystem:windows /incremental:yes\ /pdb:"$(OUTDIR)/Prime95.pdb" /debug /machine:I386 /out:"$(OUTDIR)/Prime95.exe" LINK32_OBJS= \ "$(INTDIR)/Priority.obj" \ "$(INTDIR)/CpuDlg.obj" \ "$(INTDIR)/PreferencesDlg.obj" \ "$(INTDIR)/TestDlg.obj" \ "$(INTDIR)/Prime95.obj" \ "$(INTDIR)/ContentsDlg.obj" \ "$(INTDIR)/MainFrm.obj" \ "$(INTDIR)/EditDropFiles.obj" \ "$(INTDIR)/Prime95Doc.obj" \ "$(INTDIR)/Prime95View.obj" \ "$(INTDIR)/StdAfx.obj" \ "$(INTDIR)/AffinityDlg.obj" \ "$(INTDIR)/Prime95.res" "$(OUTDIR)\Prime95.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) $(LINK32) @<< $(LINK32_FLAGS) $(LINK32_OBJS) << !ENDIF .c{$(CPP_OBJS)}.obj: $(CPP) $(CPP_PROJ) $< .cpp{$(CPP_OBJS)}.obj: $(CPP) $(CPP_PROJ) $< .cxx{$(CPP_OBJS)}.obj: $(CPP) $(CPP_PROJ) $< .c{$(CPP_SBRS)}.sbr: $(CPP) $(CPP_PROJ) $< .cpp{$(CPP_SBRS)}.sbr: $(CPP) $(CPP_PROJ) $< .cxx{$(CPP_SBRS)}.sbr: $(CPP) $(CPP_PROJ) $< ################################################################################ # Begin Target # Name "Prime95 - Win32 Release" # Name "Prime95 - Win32 Debug" !IF "$(CFG)" == "Prime95 - Win32 Release" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" !ENDIF ################################################################################ # Begin Source File SOURCE=.\ReadMe.txt !IF "$(CFG)" == "Prime95 - Win32 Release" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\Prime95.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_PRIME=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\MainFrm.h"\ ".\Prime95Doc.h"\ ".\Prime95View.h"\ "$(INTDIR)\Prime95.obj" : $(SOURCE) $(DEP_CPP_PRIME) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_PRIME=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\MainFrm.h"\ ".\Prime95Doc.h"\ ".\Prime95View.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\Prime95.obj" : $(SOURCE) $(DEP_CPP_PRIME) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\StdAfx.cpp DEP_CPP_STDAF=\ ".\StdAfx.h"\ !IF "$(CFG)" == "Prime95 - Win32 Release" # ADD CPP /Yc"stdafx.h" BuildCmds= \ $(CPP) /nologo /MT /W3 /GX /Ot /Oi /Ob1 /Gf /Gy /I ".." /D "WIN32" /D "NDEBUG"\ /D "_WINDOWS" /D "_MBCS" /Fp"$(INTDIR)/Prime95.pch" /Yc"stdafx.h"\ /Fo"$(INTDIR)/" /Gs /Gs /c $(SOURCE) \ "$(INTDIR)\StdAfx.obj" : $(SOURCE) $(DEP_CPP_STDAF) "$(INTDIR)" $(BuildCmds) "$(INTDIR)\Prime95.pch" : $(SOURCE) $(DEP_CPP_STDAF) "$(INTDIR)" $(BuildCmds) !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" # ADD CPP /Yc"stdafx.h" BuildCmds= \ $(CPP) /nologo /MDd /W3 /Gm /GX /Zi /Ot /Oi /I ".." /D "WIN32" /D "_DEBUG" /D\ "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /D "GDEBUG" /Fp"$(INTDIR)/Prime95.pch"\ /Yc"stdafx.h" /Fo"$(INTDIR)/" /Fd"$(INTDIR)/" /c $(SOURCE) \ "$(INTDIR)\StdAfx.obj" : $(SOURCE) $(DEP_CPP_STDAF) "$(INTDIR)" $(BuildCmds) "$(INTDIR)\Prime95.pch" : $(SOURCE) $(DEP_CPP_STDAF) "$(INTDIR)" $(BuildCmds) !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\MainFrm.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_MAINF=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\MainFrm.h"\ "$(INTDIR)\MainFrm.obj" : $(SOURCE) $(DEP_CPP_MAINF) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_MAINF=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\MainFrm.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\MainFrm.obj" : $(SOURCE) $(DEP_CPP_MAINF) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\Prime95Doc.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_PRIME9=\ ".\StdAfx.h"\ ".\MainFrm.h"\ ".\Prime95.h"\ ".\Prime95Doc.h"\ ".\AffinityDlg.h"\ ".\ContentsDlg.h"\ ".\CpuDlg.h"\ ".\PreferencesDlg.h"\ ".\Priority.h"\ ".\TestDlg.h"\ {$(INCLUDE)}"\sys\Timeb.h"\ ".\..\cpuid.c"\ ".\..\speed.c"\ ".\..\giants.h"\ ".\..\giants.c"\ ".\..\gwnum.c"\ ".\..\prp.c"\ ".\..\prp95.c"\ "$(INTDIR)\Prime95Doc.obj" : $(SOURCE) $(DEP_CPP_PRIME9) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_PRIME9=\ ".\StdAfx.h"\ ".\MainFrm.h"\ ".\Prime95.h"\ ".\Prime95Doc.h"\ ".\AffinityDlg.h"\ ".\ContentsDlg.h"\ ".\CpuDlg.h"\ ".\PreferencesDlg.h"\ ".\Priority.h"\ ".\TestDlg.h"\ {$(INCLUDE)}"\sys\Timeb.h"\ ".\..\cpuid.c"\ ".\..\speed.c"\ ".\..\giants.h"\ ".\..\giants.c"\ ".\..\gwnum.c"\ ".\..\prp.c"\ ".\..\prp95.c"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\Prime95Doc.obj" : $(SOURCE) $(DEP_CPP_PRIME9) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\Prime95View.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_PRIME95=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\Prime95Doc.h"\ ".\Prime95View.h"\ "$(INTDIR)\Prime95View.obj" : $(SOURCE) $(DEP_CPP_PRIME95) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_PRIME95=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\Prime95Doc.h"\ ".\Prime95View.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\Prime95View.obj" : $(SOURCE) $(DEP_CPP_PRIME95) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\Prime95.rc DEP_RSC_PRIME95_=\ ".\res\Prime95.ico"\ ".\res\yellow_i.ico"\ ".\res\cursor1.cur"\ ".\res\cursor2.cur"\ ".\res\Prime95.rc2"\ "$(INTDIR)\Prime95.res" : $(SOURCE) $(DEP_RSC_PRIME95_) "$(INTDIR)" $(RSC) $(RSC_PROJ) $(SOURCE) # End Source File ################################################################################ # Begin Source File SOURCE=.\hlp\Prime95.hpj !IF "$(CFG)" == "Prime95 - Win32 Release" # Begin Custom Build - Making help file... OutDir=.\Release ProjDir=. TargetName=Prime95 InputPath=.\hlp\Prime95.hpj "$(OutDir)\$(TargetName).hlp" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" "$(ProjDir)\makehelp.bat" # End Custom Build !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" # Begin Custom Build - Making help file... OutDir=.\Debug ProjDir=. TargetName=Prime95 InputPath=.\hlp\Prime95.hpj "$(OutDir)\$(TargetName).hlp" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" "$(ProjDir)\makehelp.bat" # End Custom Build !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\CpuDlg.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_CPUDL=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\CpuDlg.h"\ "$(INTDIR)\CpuDlg.obj" : $(SOURCE) $(DEP_CPP_CPUDL) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_CPUDL=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\CpuDlg.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\CpuDlg.obj" : $(SOURCE) $(DEP_CPP_CPUDL) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\PreferencesDlg.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_PREFE=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\PreferencesDlg.h"\ "$(INTDIR)\PreferencesDlg.obj" : $(SOURCE) $(DEP_CPP_PREFE) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_PREFE=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\PreferencesDlg.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\PreferencesDlg.obj" : $(SOURCE) $(DEP_CPP_PREFE) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\TestDlg.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_TESTD=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\TestDlg.h"\ "$(INTDIR)\TestDlg.obj" : $(SOURCE) $(DEP_CPP_TESTD) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_TESTD=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\TestDlg.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\TestDlg.obj" : $(SOURCE) $(DEP_CPP_TESTD) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\Priority.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_PRIOR=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\Priority.h"\ "$(INTDIR)\Priority.obj" : $(SOURCE) $(DEP_CPP_PRIOR) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_PRIOR=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\Priority.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\Priority.obj" : $(SOURCE) $(DEP_CPP_PRIOR) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\AffinityDlg.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_AFFIN=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\AffinityDlg.h"\ "$(INTDIR)\AffinityDlg.obj" : $(SOURCE) $(DEP_CPP_AFFIN) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_AFFIN=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\AffinityDlg.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\AffinityDlg.obj" : $(SOURCE) $(DEP_CPP_AFFIN) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\EditDropFiles.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_EDITD=\ ".\StdAfx.h"\ ".\Prime95.h"\ "$(INTDIR)\EditDropFiles.obj" : $(SOURCE) $(DEP_CPP_EDITD) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_EDITD=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\EditDropFiles.obj" : $(SOURCE) $(DEP_CPP_EDITD) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File ################################################################################ # Begin Source File SOURCE=.\ContentsDlg.cpp !IF "$(CFG)" == "Prime95 - Win32 Release" DEP_CPP_CONTE=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\ContentsDlg.h"\ "$(INTDIR)\ContentsDlg.obj" : $(SOURCE) $(DEP_CPP_CONTE) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ELSEIF "$(CFG)" == "Prime95 - Win32 Debug" DEP_CPP_CONTE=\ ".\StdAfx.h"\ ".\Prime95.h"\ ".\ContentsDlg.h"\ ".\EditDropFiles.h"\ ".\..\cpuid.h"\ ".\..\speed.h"\ ".\..\gwnum.h"\ ".\..\prp.h"\ ".\..\prp95.h"\ "$(INTDIR)\ContentsDlg.obj" : $(SOURCE) $(DEP_CPP_CONTE) "$(INTDIR)"\ "$(INTDIR)\Prime95.pch" !ENDIF # End Source File # End Target # End Project ################################################################################ --- (compile) # Standard options copt=/Oi /Os /Ob1 /Zi /Id:\msdev\include /I.. # This line allows NMAKE to work as well all: ntprime.exe # Update the object files if necessary main.obj: main.c main.h prime95.h cl -c -Gs -Ze $(copt) -W3 main.c service.obj: service.c service.h cl -c -Gs -Ze $(copt) -W3 service.c prime.obj: prime.c prime95.h ..\commonc.c ..\commonb.c cl -c -Gs -Ze $(copt) -W3 prime.c # Update the executable file ntprime.exe: main.obj prime.obj service.obj link @main.lnk del ntprime.exe del main.lib del main.exp rename main.exe ntprime.exe Scrollbar question with RichEditControl gordingin29-Oct-01 15:10 gordingin 29-Oct-01 15:10  I would like to show the scrollbar in my RichEditControl even is there is no text. I dynamically create the control, using the WS_VSCROLL flag but I still don't see the bar. Anyone? Thanks Ralph Krausse CListCtrl question (custom) 29-Oct-01 14:39 29-Oct-01 14:39  Hi all, Like everyone who has done any CListCtrl work, I want to make some changes (sub-item editing and the like). Easy enough to do, done it already with a CListView. To save myself from having to make the same change over and over I thought it would be nice to make a proper CListViewEx style class derived from CCtrlView. I'm sure everyone who's tried this knows the problem, silly GetListCtrl() casts a pointer to itself Anyway, I reckon I have a cunning solution (someone please stop me if this won't work!) I'm going to derive a new CListCtrl (called CListCtrlEx) add the changes to it (I've actually already done this) and it works via subclassing (i.e. create a ListCtrl with the dialog editor and select the subclass to be ListCtrlEx). Now in order to do the cunning bit with the CCtrlView I need to register this new class with Windows, no problem, stole some code from a tutorial on this site and all works well, the class registers. However, and here's the problem (at last), if I create a custom control with the dialog editor, set the class accordingly and do all the necessary member modifications (i.e. add DDX stuff), the app. compiles fine, but nothing appears on my little test dialog, anyone know why? I've included the code below, it's so simple and I can't see why the ListCtrl won't paint, unless I can get the registered control to draw itself my cunning plan is going to fail Here's the whole thing (bar the dialog bits): CListCtrlEx::CListCtrlEx() { TRACE("CListCtrlEx() is constructing....\n"); if(RegisterWindowClass()) TRACE("CListCtrlEx() - Class registered.\n"); } CListCtrlEx::~CListCtrlEx() { TRACE("CListCtrlEx() is destructing....\n"); } bool CListCtrlEx::RegisterWindowClass() { WNDCLASS wndcls; HINSTANCE hInst = AfxGetInstanceHandle(); bool status = false; if(!(::GetClassInfo(hInst, _T("CListCtrlEx"), &wndcls))) { // otherwise we need to register a new class wndcls.style = CS_DBLCLKS | CS_HREDRAW | CS_VREDRAW; wndcls.lpfnWndProc = ::DefWindowProc; wndcls.cbClsExtra = wndcls.cbWndExtra = 0; wndcls.hInstance = hInst; wndcls.hIcon = NULL; wndcls.hCursor = AfxGetApp()->LoadStandardCursor(IDC_ARROW); wndcls.hbrBackground = (HBRUSH) COLOR_BTNSHADOW; wndcls.lpszMenuName = NULL; wndcls.lpszClassName = _T("CListCtrlEx"); if(!AfxRegisterClass(&wndcls)) { AfxThrowResourceException(); status = false; } else status = true; } else TRACE("CListCtrlEx()::RegisterWindowClass() - Class already registered.\n"); return(status); } BEGIN_MESSAGE_MAP(CListCtrlEx, CListCtrl) //{{AFX_MSG_MAP(CListCtrlEx) ON_NOTIFY_REFLECT(NM_CLICK, OnClick) //}}AFX_MSG_MAP END_MESSAGE_MAP() ///////////////////////////////////////////////////////////////////////////// // CListCtrlEx message handlers void CListCtrlEx::OnClick(NMHDR* pNMHDR, LRESULT* pResult) { NMLISTVIEW *lv = (NMLISTVIEW *)pNMHDR; TRACE("CListCtrlEx::OnClick() - Got a click (at %02d,%02d)\n",lv->ptAction.x,lv->ptAction.y); *pResult = 0; } void CListCtrlEx::PreSubclassWindow() { TRACE("CListCtrlEx::PreSubclassWindow() - Running....\n"); CListCtrl::PreSubclassWindow(); } Re: CListCtrl question (custom) Tomasz Sowinski30-Oct-01 0:48 Tomasz Sowinski 30-Oct-01 0:48  If CListCtrlEx is derived from CListCtrl, then you don't need to create a custom control. Just paint a normal listctrl in dialog editor, and associate CListCtrlEx with the dialog control using ClassWizard. It should be smart enough to find out your class - CListCtrlEx should appear in the dropdown list for selecting type. If it's not there, delete .clw file and try again. If ClassWizard still doesn't work after deleting and recreating .clw file, manually add DDX_Control(pDX, IDC_YOUR_ID, m_yourList) in DoDataExchange. Tomasz Sowinski -- http://www.shooltz.com Window minumim width ? Christian Graus29-Oct-01 13:15 Christian Graus 29-Oct-01 13:15  I'm creating a Window using CreateWindow ( i.e. no MFC ) and finding when I resize it I cannot go below a certain width. It's a toolbar, and the minimum width is about 1 1/2 as wide as my buttons, so looks like hell. Is there any way to set this ? Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001 Re: Window minumim width ? 29-Oct-01 13:24 29-Oct-01 13:24  Hi Christian, You need to capture the WM_GETMINMAXINFO and handle it yourself, The default window proc for this sets it to a small(ish) value, but you can set it to whatever you like. Cheers, Nick Re: Window minumim width ? Christian Graus29-Oct-01 13:50 Christian Graus 29-Oct-01 13:50  Cool - thanks Nick. Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001 Windows API issue 29-Oct-01 13:14 29-Oct-01 13:14  Does anyone know how to correct this problem when running Vis C++ in Win2k-->Receive main.obj : unresolved external symbol "function being called" for every windows api call i make. ex. main.obj : error LNK2001: unresolved external symbol __imp__ShellExecuteA@24 just replace ShellExecuteA@24 w/ one listed below and you have the error i receive. SHQueryRecycleBinA@8 SHLoadInProc@4 SHInvokePrinterCommandW@20 SHInvokePrinterCommandA@20 SHGetSpecialFolderPathW@16 SHGetSpecialFolderPathA@16 SHGetSpecialFolderLocation@12 SHGetPathFromIDListW@8 SHGetPathFromIDListA@8 SHGetPathFromIDList@8 SHGetNewLinkInfo@20 i have included the windows.h Re: Windows API issue Christian Graus29-Oct-01 13:16 Christian Graus 29-Oct-01 13:16  I'm pleased you registered/signed in. Link to shell32.lib as I've said twice before. If you don't know how to do that, you should say so, rather than just asking the same thing again. Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001 Re: Windows API issue Nish Nishant29-Oct-01 13:56 Nish Nishant 29-Oct-01 13:56  Christian, he didnt register Still an anonymous post [but he's given a name] Nish Re: Windows API issue Nish Nishant29-Oct-01 13:54 Nish Nishant 29-Oct-01 13:54  Put Shell32.lib in your Object/Library modules list Nish Window's API problems 29-Oct-01 13:08 29-Oct-01 13:08  Does anyone know how to correct this problem when running Vis C++ in Win2k-->Receive main.obj : unresolved external symbol "function being called" for every windows api call i make. ex. main.obj : error LNK2001: unresolved external symbol __imp__ShellExecuteA@24 just replace ShellExecuteA@24 w/ one listed below and you have the error i receive. SHQueryRecycleBinA@8 SHLoadInProc@4 SHInvokePrinterCommandW@20 SHInvokePrinterCommandA@20 SHGetSpecialFolderPathW@16 SHGetSpecialFolderPathA@16 SHGetSpecialFolderLocation@12 SHGetPathFromIDListW@8 SHGetPathFromIDListA@8 SHGetPathFromIDList@8 SHGetNewLinkInfo@20 i have included the windows.h header file. Re: Window's API problems Christian Graus29-Oct-01 13:13 Christian Graus 29-Oct-01 13:13  Either you've already had the answer, or two people have asked the same question in a matter of hours. If you took 30 seconds to register you'd get email notification when people answer your questions. Include shell32.lib in the libraries for your project. Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001 simple real audio making lo29-Oct-01 12:40 lo 29-Oct-01 12:40  I want to make a simple real audio, namely play, stop, pause.... Do you know? if you know, please send the source to me !! Thanks. Drawing a RoundRect and add an action handler? 29-Oct-01 12:06 29-Oct-01 12:06  Has anyone here done anything like that? I remember some code here which drew some lines and added an action to each any any of those lines. Have anyone here got any sample of similar stuff? I would like to add an action to a drawn item... If it was made simpel I couldn't have been any happier Re: Drawing a RoundRect and add an action handler? Rassman30-Oct-01 2:53 Rassman 30-Oct-01 2:53  Either make your drawing strokes 'objects' so you get a message when you bash it with the mouse. Should I say how? I just found this group and going by some of the items on the lists I think there's a fair depth of knowledge. So should I assume you know how to create (in this case, transparent-borderless objects)? Or. You could 'remember' where your drawing strokes (or lines) are so your mouse click/possition gives you information you need to know which line is clicked. This one is a bit naff since you practically create the 'object' in the structure that holds the stoke/line information. We do it for the joy of seeing the users struggle. Re: Drawing a RoundRect and add an action handler? 30-Oct-01 5:12 30-Oct-01 5:12  Yeah, I see what you are thinking. 'Been thinking somewhere along in the same alley as you. In the code I saw the creator of that code used some sort of a dynamic structure to maintain the amount of objects currently reaction to actions. (An then also their respective addresses onto the view etc) I don't know WHY I ask questions where I seem to get answers according to my own ideas... Thanks anyways! Re: Drawing a RoundRect and add an action handler? Rassman30-Oct-01 23:40 Rassman 30-Oct-01 23:40  I think we often ask questions simply to bounce our idea off another head. Thats the joy of team programming, but we often don't work in teams so need a forum such as this to do the same job. We do it for the joy of seeing the users struggle. Win32 -- RtlAllocateHeap Peter Weyzen29-Oct-01 11:55 Peter Weyzen 29-Oct-01 11:55  This is a really broad question -- I have an ongoing but rare crash in RtlAllocateHeap (HeapAlloc). I am wondering if anyone has any good suggestions on how to gather more information on this. I realize that my question is vague..... -p

Last Visit: 31-Dec-99 18:00     Last Update: 2-Jun-24 5:45 Refresh ᐊ Prev1...17829178301783117832178331783417835178361783717838 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.