|
cool thanks for that...any idea of how to get that functionality into java?
thanks again
Give me strength, give me caffeine
|
|
|
|
|
I'm not sure what 'RAND_MAX' is, but other than that, the conversion produced by C++ to Java Converter follows (including a helper class that the converter outputs to help simulate C++ random number functionality in Java):
import java.util.*;
//C++ TO JAVA CONVERTER NOTE: The following #define macro was replaced in-line:
//#define rand01 (0.9999999*double(rand())/RAND_MAX)
private void test()
{
r = (int)(Math.floor(N*(0.9999999 *(double)(RandomNumbers.nextNumber())/RAND_MAX)));
}
//----------------------------------------------------------------------------------------
// Copyright © 2006 - 2008 Tangible Software Solutions Inc.
//
// This class provides the ability to simulate the behavior of the C/C++ functions for
// generating random numbers.
// 'rand' converts to the parameterless overload of NextNumber
// 'random' converts to the single-parameter overload of NextNumber
// 'randomize' converts to the parameterless overload of Seed
// 'srand' converts to the single-parameter overload of Seed
//----------------------------------------------------------------------------------------
final class RandomNumbers
{
private static Random r;
static int nextNumber()
{
if (r == null)
Seed();
return r.nextInt();
}
static int nextNumber(int ceiling)
{
if (r == null)
Seed();
return r.nextInt(ceiling);
}
static void seed()
{
r = new Random();
}
static void seed(int seed)
{
r = new Random(seed);
}
}
David Anton
http://www.tangiblesoftwaresolutions.com
C++ to C# Converter
C++ to VB Converter
C++ to Java Converter
VB & C# to Java Converter
Java to VB & C# Converter
Instant C#: VB to C# converter
Instant VB: C# to VB converter
Instant C++: convert VB, C#, or Java to C++/CLI
|
|
|
|
|
I have been assigned the task of updating a Visual C++ 6 software package to Visual C++ 2008. VS2008 did a bang up job during the conversion, leaving but a couple of dozen items to repair my self. One in particular has me against the wall.
Here is the reported error;
error C2678: binary '||' : no operator found which takes a left-hand operand of type '_bstr_t' (or there is no acceptable conversion)
The line it refers to is;
ASSERT(m_bstrDataSource);
Here is the ASSERT definition in AFX.H;
#define ASSERT(f) DEBUG_ONLY((void) ((f) || !::AfxAssertFailedLine(THIS_FILE, __LINE__) || (AfxDebugBreak(), 0)))
I would greatly appreciate some guidance.
|
|
|
|
|
Dale Bourne wrote: I would greatly appreciate some guidance.
Do you have comdef.h included?
"Love people and use things, not love things and use people." - Unknown
"The brick walls are there for a reason...to stop the people who don't want it badly enough." - Randy Pausch
|
|
|
|
|
try ASSERT(NULL != m_bstrDataSource);
The ASSERT macro needs to passed a boolean expression so that (f) in the macro will evaluate to either true or false.
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good - Use it!
|
|
|
|
|
Hi dudes!
I am currently facing this problem, i am creating a new MFC static Dll but when i add the CLR support i get weird errors like:
->Command line error D8016 : '/MTd' and '/clr' command-line options are incompatible cl
i "fixed" this by changing Runtime Library to '/MDd' option
And then it throws me:
->fatal error C1189: #error : Building MFC application with /MD[d] (CRT dll version) requires MFC shared dll version. Please #define _AFXDLL or do not use /MD[d] C:\Program Files\Microsoft Visual Studio 8\VC\atlmfc\include\afx.h 24
I change my Dll to MFC shared dll version
Next it compiles but it gives me this warnings:
->warning LNK4099: PDB 'mfcm80ud.i386.pdb' was not found with 'C:\Program Files\Microsoft Visual Studio 8\VC\atlmfc\lib\mfcm80ud.lib' or at 'c:\XXX\npwyncs_dll\debug\mfcm80ud.i386.pdb'; linking object as if no debug info
My question is what is the correct or best way of doing an MFC dll support CLR, cause i am not too comfortable doing all this ?
Thx
|
|
|
|
|
materatsu wrote: Hi dudes!
materatsu wrote: My question is what is the correct or best way of doing an MFC dll support CLR, cause i am not too comfortable doing all this ?
Dude! Since you asked for the "best" way, it's the same as always, reading the freaking documentation is the best way. See how simple it is to find?[^] 
led mike
|
|
|
|
|
i have created a owner drawn button which works in debug version
but if i build my project in release version it does not work.
|
|
|
|
|
|
I am writing an application using C++ and MFC under Windows. I would like the application to be able to send email to me regarding its status. Is there an MFC class library that could help me do this? Is there a windows system call to send email?
Thanks
Bob
|
|
|
|
|
|
See the mail-related articles here.
"Love people and use things, not love things and use people." - Unknown
"The brick walls are there for a reason...to stop the people who don't want it badly enough." - Randy Pausch
|
|
|
|
|
I'm working on a program that basically sits and acts as a system monitor. Two of the primary things that I want it to do are monitor system memory and display when the last time a virus scan was made. Any suggestions on how I might go about this?
Thanks in advance
|
|
|
|
|
What do you want to know of memory?
|
|
|
|
|
DarthKarnage wrote: want it to do are monitor system memory
Can you explain what you mean by system memory? In windows everything is in terms of virtual memory, on 32 bit windows an application can technically can have 4GB(2^32) of memory, however normally your application have only 2GB unless you use boot parameter or Address Windowing Extensions to get more.
DarthKarnage wrote: display when the last time a virus scan was made.
There are different types of virus scanning: you can choose a file and run a scan only on that, or you can scan a drive or all the drives, or can always monitor the filesystem and scan only any new files getting created. This all depends on the settings you do on the antivirus you have on your machine. If you are expecting windows provide any APIs to get this information, I don't think there would be any.
-Suhredayan
|
|
|
|
|
Hello friends.
I have comma seperated x and y coordinates. I need to draw these. Do you have advices? How can i do this?
I've heard Visual C++ has a OnDraw() function. Or can I use OpenCV? Or something else?
Thank you all.
|
|
|
|
|
You mean you need to have some kind of graph ?
If that's the case, take a look at my sig, I developped a chart control that could be usefull for you. If not, there a section on code project with different charting controls.
|
|
|
|
|
You can use Mapping Modes for the window.
|
|
|
|
|
As your question is very basic, I'm assuming your windows programming knowledge is minimal? Nothing wrong with that - we all started there.
But if so, you are probably biting off a little bit too much.
You are asking two non-trivial questions - how do I read in a file of comma separated values, and how do I plot them?
Is there any reason why you can't use excel for plotting these values?
If you really do have to write your own software, I'd follow the other suggestion and look at the charting controls here.
Iain.
|
|
|
|
|
Yes, I just started to GUI programing.
We have an image processing project, so these values are not excel values. Dynamically changing values created with other functions.
I am now thinking, I can create a BMP and show it in a picturebox. It'll be a easy way for me. (Because I'm experienced in image processing.)
I'll be asking more questions about these. 
Thanks a lot.
|
|
|
|
|
Hello, how to get the accounts that appear on "Control Panel/User Accounts" dialog page? I tried NetUserEnum and the IADsUser interface but they return built-in accounts too. I need to get only the "human" accounts. Thank you.
Martin
|
|
|
|
|
Hi to all
I want to load multiple images at particular locations on a control using win 32 C++ and move that images without redraw the control or image.
Thanks
~Khatri Mitesh
khatrimitesh@hotmail.com
Bikaner (Rajasthan)
INDIA
|
|
|
|
|
What control? your question is general not specific buttons? static control? you need to tree control listview listbox?
|
|
|
|
|
Hamid. wrote: What control? your question is general not specific buttons? static control? you need to tree control listview listbox?
I think he needs a mind control. 
led mike
|
|
|
|
|
Hi
In any control (Like Picture box control) i want to load the multiple images. and move the images.
Thanks
~Khatri Mitesh
khatrimitesh@hotmail.com
Bikaner (Rajasthan)
INDIA
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
