|
i tried but now this give the error
"Exclusive access could not be obtained because the database is in use.
RESTORE DATABASE is terminating abnormally."
i already close all connection to my database. Also i close my IDE.
Please suggest.
|
|
|
|
|
The reason for the error is that some connection is still using your database (you can use Management Studio to find out the connection).
If you want to remove the connections from your database, you can try adding
ALTER DATABASE Vehicle SET SINGLE_USER WITH ROLLBACK IMMEDIATE
That closes all connections from the database and rolls back all active transactions.
The need to optimize rises from a bad design
|
|
|
|
|
Thanks mika for your quick response
i resolve the problem by using ClearAllPools procedure provided by .net.
one more thing ,Whether there are any other method for restore. Since this method require one more databse
Thanks a Lot
|
|
|
|
|
For actual restore there is no other method. You need two databases if you want to have a stored procedure which does the restore. If you place the restore command into an application, you won't need another database.
Depending what you want to achieve, you can search for alternatives for restoring a database, such as detach/attach database, loading data using SSIS or bcp etc.
The need to optimize rises from a bad design
|
|
|
|
|
Mika Wendelius wrote: If you place the restore command into an application, you won't need another database.
how can i achieve this thing ?I tried but 'Database is in use' error occured
|
|
|
|
|
Using .Net (SqlConnection and SqlCommand classes):
- connect to SQL Server
- use master database (or connect directly to it)
- optionally disconnect other users from your database if there are any using the command from my previous post
- execute the restore statement
- release the database to multi user state
So basically the logic is the same, but it isn't placed inside a stored proc but a calling aplication which doesn't connect to your database (Vehicle) but to master database.
The need to optimize rises from a bad design
|
|
|
|
|
hi Mika,
Thanks a lot.
i am stupid so i create temp database(and not use the master database).
Previously i use restore statement in code but with connection object i use the main database.
Now i use master database.
One more question what is the life time of this type of backup mean 1 day,2 day... (Please see my first post of this Thread for backup procedure)
once again
Thanks you very much
|
|
|
|
|
I don't quite understand what you mean with lifetime?
You can take a backup today and restore it back one year later if you want. However you will loose then all changes that have taken place within a year. So a backup file is valid as long as you keep it somewhere safe.
The need to optimize rises from a bad design
|
|
|
|
|
hai
I have the table mytable.
I want to indexing the mytable.
I want the queries for indexing,Searching the words in my table and Advanced Searching.
I have solution for webpages searching, words in files searching but
any where i dont find Database searching.
Thanks and Regards
--------------------
Rama koteswararao.y
|
|
|
|
|
There is no simple answer, what you are looking at is optimisation, and without knowing lots more information nobody can advise you. For example, how big is the table, what are the main queries going to be on?
Optimisation is a large subject with no cut and dried answers. If you are using sql server then look at the query plans, and sql server 2005 also has (under the Query menu) Analyze Query In database Engine Tuning Advisor which can give you some good guideline.
Bob
Ashfield Consultants Ltd
|
|
|
|
|
i cant find Tuning advisor give me correct path plz
|
|
|
|
|
Tuning advisor is under the Query Menu, but its not there if you nly have the express version.
Bob
Ashfield Consultants Ltd
|
|
|
|
|
Hi Guys.I have a table in database Access with a Font(example:VN-Times).I want to bring all struct and data from Access to Sql with Font default in SQL(Unicode).Please help me how to do 
if you cound not try then
msgbox("you will lose")
else
msgbox("you can change yourself")
end if
|
|
|
|
|
Databases don't store fonts. You either have char/varchar (standard ascii characters) or nchar/nvarchar which is unicode.
Bob
Ashfield Consultants Ltd
|
|
|
|
|
It sounds like he is storing font characteristics for some control in his database. If that is the case, what's so hard about replicating Access fields into SQL, doing the proper conversions of the field types?
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
"Not only do you continue to babble nonsense, you can't even correctly remember the nonsense you babbled just minutes ago." - Rob Graham
|
|
|
|
|
I just started with SSRS and I created a report with the following structure:
MY MONTHLY EXPENSES
Total Income: $7,800.00
// Group by Week
Week: 1
Biller Name Amount Due Due Date
------------ ---------- ----------
Children's Savings $150.00 9/11/2008
Sam's Club $15.00 9/11/2008
Total Week 1: $165.00
Week 1 Balance: $7,635.00
-----------------------------------------
Week: 2
Biller Name Amount Due Due Date
------------ ---------- ----------
Tuition $80.00 8/5/2008
Cable $95.00 8/5/2008
Citibank $400.00 8/8/2008
Discover $200.00 8/6/2008
Water $35.00 8/7/2008
Bank of America $200.00 8/1/2008
Health Insurance $350.00 8/1/2008
Total Week 2: $1,360.00
Week 2 Balance: $6,440.00 (wrong!)...
-----------------------------------------
... and so on until the last week of the month. As you may noticed the second Week Balance is resulting from the subtraction of the Week Expense 2 value from the Total income what is incorrect since I previously subtract it from the previous week (total week 1), so it should be something like:
$7,635.00 (week balance 1) - $1,360 (total week 2) = $6,275 (week balance 2).
At the end of the report I'd like to have the remain balance. something like:
Remain Balance: (7,800 - (tw1 + tw2 + tw3 + tw4...))
My question is: How can I evaluate the value in Textboxes and make them interact inside he report so I can accomplish the right calculation?
It seems simple but I couldn't find a solution for this yet.
TIA for any suggestion! 
"Blessed is the man who finds wisdom, the man who gains understanding."
Proverbs 3:13 ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
|
|
|
|
|
i see what you mean but is this the right forum?
this is about Crystal Reports(look´s nice) i think post in c# forum.
I still learning CR, can´t help you there, in c# it´s easyer
Good Luck
nelsonpaixao@yahoo.com.br
trying to help & get help
|
|
|
|
|
If you have created an application which uses database, and installed it for your client. Next you have updated the application and updating the database structure. So the client's database and the newest database has different structure. What is the ideal way to update the database structure, and still using client's previous entered data. I use C#.
|
|
|
|
|
Depends on the changes. You could possibly use an amend script, otherwise you create the new table and copy the data in. There is no easy way.
Bob
Ashfield Consultants Ltd
|
|
|
|
|
With over 900 posts you should know better than to cross post 
Bob
Ashfield Consultants Ltd
|
|
|
|
|
Which post are you referring?
|
|
|
|
|
Yours of course. You posted this same question here and the C# forum- maybe a mistake?
Bob
Ashfield Consultants Ltd
|
|
|
|
|
Oh, that's right. I though the problem is related to C# and database. Don't know where to post.
|
|
|
|
|
I have used this method successfully before ...
Create a set of "Upgrade" scripts for your database.
You could have a UpgradeSchema script where you would alter tables, indexes, etc and have a "UpgradeSystemData" script where you could populate your systems tables like a table of States, or a Tax table.
Best advice is to TEST, TEST, TEST these scripts an important test is to run the script once, then run it again on the newly upgraded database ... you will need to trap for the case where you want to add a column to a table and the table already exists. Also, trap for duplicate keys when inserting data.
Good luck.
|
|
|
|
|
I am trying to install the SQL Server Express 2005 with Advance Services SP1 but it's failing with the following error:
TITLE: Microsoft SQL Server Setup
------------------------------
UpgradeAdvisor returned -1 .
Error message:
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=29552
------------------------------
BUTTONS:
OK
------------------------------
and I am getting this in the event log:
Product: Microsoft SQL Server 2005 Reporting Services -- Error 25631. The setup failed to read IIsMimeMap table. The error code is -2147023550.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
