|
What you currently have is only slightly better than a brick, so it doesn't seem like you'd loose all that much
"A little song, a little dance, a little seltzer down your pants"
Chuckles the clown
|
|
|
|
|
Re-read my first message. It's now performing well within acceptable range (to me) using RAID-10. I'm not going to re-try RAID-5.
|
|
|
|
|
I'm the person who suggested going to RAID-10 for both safety and speed. The fact that RAID-5 was so slow tells me that there is no hardware support on that enclosure for the RAID-5 calculations and it was being done entirely in software.
|
|
|
|
|
I'm guessing it was a poor RAID-5 implementation.
Do note also that I've installed zero software for this, so the parity computation still has to be done by something in the enclosure, and not the CPU of the system it's connected to...
|
|
|
|
|
But that enclosure must have some CPU (and RAM). And hopefully a hardware RAID controller.
If it doesn't have a hardware RAID controller, all the work has to be done by the CPU (of the enclosure), with decent amount of RAM.And for RAID5, A LOT of calculation has to be done for the striping. RAID5 is aimed at use cases where the fault tolerance is of higher importance than performance, though read performance should suffer far less than write performance, as the later has the highest amount of computation and possibly data reordering...
So if your enclosure is CPU+RAM only, with both a slow CPU and little RAM, then it is quite logical that that it will show a subpar performance.
|
|
|
|
|
Agreed. My original post included the full make/model of the enclosure. I haven't come across anything that documents its internals however - not that I've tried very hard. But, it's there if someone's curious...
[Edit]
I just asked ChatGPT to describe how that works. It first suggested the host CPU was being used to calculate parity and such. I then pointed out I installed no software, so what process, exactly, is performing the calculations...to which it said I was right and it was wrong, and proceeded to explain that's done by the RAID controller (its exact words: "the actual parity calculations and RAID management occur within the enclosure itself, independent of any proprietary software on the host system.")
Yeah, I'm not worried about these glorified chatbots taking over just yet. Problem is, the majority of people interacting with them just don't question its responses and just go with them...
|
|
|
|
|
Well, the "RAID controller" of this box is certainly software based, as in software running on the CPU and the RAM integral to that box. And with a $160 price tag, this is certainly NOT a real hardware controller, those cost just by themselves as much.
Looked at their manual, and it doesn't even remotely reveal anything about the internals. Looks fancy though...
|
|
|
|
|
Ralf Quint wrote: Looks fancy though...
I've got to admit, it's a nice-looking box.
I had bad experiences with RAID over a decade ago, figured it couldn't still be so bad, so I went with this one. I'm okay with the performance (now that I'm using RAID-10) so I'll stick with it. But I wouldn't exactly rush to buy another one, or recommend it to non-technical users.
|
|
|
|
|
dandy72 wrote: If I've reached the wrong conclusion, then I'm wrong. I just see nothing else to blame right now. While RAID 10 sounds like the way to go, gotta at least give some love to RAID 5. Due to using the parity data on RAID 5 (which is what makes those writes slow) you can still rebuild while claiming more space when compared to RAID 5. Reads are still ok on 5, it's just the write speeds that suck. More times than not, you'll never need 5 for home use, but on those instances where space is more important than speed (for backups rarely accessed, etc.) it's nice to know it's there.
Jeremy Falcon
|
|
|
|
|
I agree completely. I mentioned I initially thought RAID-5 provided the better capacity:redundancy ratio so I went for that. If performance wasn't in issue, that'd still be my first choice.
I'm only intending to use the RAID as an extra backup. In other words, I'd regularly replace bits that have changed and write whatever is new. If all went well, in theory, I'd never need to read anything back. The only time it'd be in use is for write operations.
And this backup set includes VMs that I need to keep running most of the time. The performance I was seeing with RAID-5 made that impossible.
|
|
|
|
|
dandy72 wrote: The performance I was seeing with RAID-5 made that impossible. Fo sho, I read obermd's post after mine, but he made a great point.
Jeremy Falcon
|
|
|
|
|
Of course RAID-5 has terrible write performance. That's practically its purpose.
I've seen SQL Server installations that had one gigantic (by the standards of the day) RAID-5 volume to hold everything.
I was able to improve performance by a significant amount (2x?) just by fixing that stupid configuration.
This was 20+ years ago so some of the details are a bit hazy.
|
|
|
|
|
Thank you for your timely, constructive input.
I've since come to the same conclusion.
|
|
|
|
|
Wordle 1,042 4/6
⬛⬛🟨⬛⬛
⬛🟨🟨🟨⬛
🟩🟩⬛🟩🟩
🟩🟩🟩🟩🟩
Never heard of the word... hit n try with last letter.
|
|
|
|
|
Wordle 1,042 3/6
⬜⬜🟨⬜⬜
🟨🟨⬜⬜⬜
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 1,042 4/6
⬜⬜🟨⬜⬜
⬜⬜⬜🟩⬜
⬜🟩⬜🟩⬜
🟩🟩🟩🟩🟩
Had to look it up.
|
|
|
|
|
Wordle 1,042 3/6*
🟨⬜⬜⬜⬜
🟨⬜🟨🟩⬜
🟩🟩🟩🟩🟩
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Wordle 1,042 6/6
⬜⬜🟨⬜⬜
⬜⬜⬜⬜⬜
⬜⬜🟨⬜⬜
🟨🟨⬜🟨⬜
⬜🟩🟩🟩🟩
🟩🟩🟩🟩🟩
Sandeep Mewara wrote: Never heard of the word... hit n try with last letter. Same!
|
|
|
|
|
⬜⬜🟨⬜⬜
🟨🟨⬜⬜⬜
🟨🟨⬜🟩🟩
🟩🟩🟩🟩🟩
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
Wordle 1,042 5/6*
🟨⬛⬛⬛⬛
⬛⬛🟨🟩⬛
🟨⬛⬛🟩⬛
⬛🟩⬛🟩⬛
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 1,042 4/6*
⬜⬜🟨⬜⬜
🟨⬜⬜⬜⬜
🟨🟩⬜🟨⬜
🟩🟩🟩🟩🟩
Happiness will never come to those who fail to appreciate what they already have. -Anon
And those who were seen dancing were thought to be insane by those who could not hear the music. -Frederick Nietzsche
|
|
|
|
|
Wordle 1,042 3/6
⬛⬛🟨⬛⬛
🟨⬛🟩⬛⬛
🟩🟩🟩🟩🟩
If it would've been an easier word, I would've gotten 6/6.
Jeremy Falcon
|
|
|
|
|
Wordle 1,042 4/6
🟨🟨🟨⬜⬜
🟨🟨🟨⬜⬜
🟩🟩⬜🟩🟩
🟩🟩🟩🟩🟩
New word learnt today.
|
|
|
|
|
Wordle 1,042 5/6
⬛⬛⬛🟨🟩
⬛⬛🟨🟩🟩
🟨⬛⬛🟩🟩
🟨🟩🟨🟩🟩
🟩🟩🟩🟩🟩
What does it even mean - stoopid word!
Ok, I have had my coffee, so you can all come out now!
|
|
|
|
|
I'm crylaughing at myself. I forgot how to enforce operator precedence in parsing code.
I've written it countless times. I have no idea how I forgot. It should be practically muscle memory at this point.
Next I will forget my birthday.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|