|
Short answer: No.
Long answer:
Unlike mechanical drives, data blocks aren't stored physically in the same order as they are logically. Blocks are physically fragmented internally in most cases, regardless (including what order the OS believes them to be in). But this doesn't matter, since all blocks are accessed at the same speed (**), eliminating any speed advantage of sequential access (++).
** Hypothetically, a high end drive could read/write multiple physical flash chips simultaneously, allowing a block to be accessed without waiting for a prior one to finish, if stored on a different chip.
++ Some Flash Translation Layer (FTL) structures may have a slight speed advantage from accessing co-located logical blocks (such as unfragmented reads). But the speed improvement would be trivial compared to the speed increase of sequential access of mechanical drives.
While a given manufacture's implementation may vary, the mapping of blocks generally works something like describe on one of these pages:
Overview of SSD Structure and Basic Working Principle(2)
Coding for SSDs – Part 3: Pages, Blocks, and the Flash Translation Layer | Code Capsule
|
|
|
|
|
...downhill!
VS consuming huge amount of memory isn't new (even MS decided to ignore it totally)...
But now I have something new... And it confirmed several times...
I have a solution with around 80 projects in it, only a several loaded at any given time... If I reload a project to change something it will not compile until VS closed and re-opened...
Until that time it will report compilation failed without any actual error, but also without the option to run...
"If builders built buildings the way programmers wrote programs, then the first woodpecker that came along would destroy civilization." ― Gerald Weinberg
|
|
|
|
|
After the last update of VS2022 my colleague reported that debugging with step over and step into didn't work anymore. It was not clear to me if he was talking about C++ or C# debugging, he also uses other debugging tools that might interfere with VS debugging.
|
|
|
|
|
RickZeeland wrote: debugging with step over and step into didn't work anymore. It was not clear to me if he was talking about C++ or C# debugging
Interesting you'd mention that. I installed the latest update last week, and on Thursday/Friday, on multiple occasions, single-stepping (F10) seemed to continue execution or couldn't recover or something like that. I attributed it to me fat-fingering it, but happened enough times that now I see your post, I'm wondering if there's something to it.
In my case that would be C#.
|
|
|
|
|
wow. Not testing much, are you Microsoft.
Charlie Gilley
“They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.” BF, 1759
Has never been more appropriate.
|
|
|
|
|
One has to remember that multi-project solutions don't (always) compile if you haven't checked the proper project(s) in the "Build | Configuration Manager" unless you specifically ask to "Build / Rebuild" that project. (Been there)
On the other hand, when VS is "sleeping", it "seems" to release (more) excess memory. I think they're doing a lot of tinkering.
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
I have a very precise dependency tree, so compiling the main project will compile everything that is outdated - I also mostly do build-solution...
But the main issue is that, there is no error behind the fail and re-opening VS solves the problem - which indicates that VS does no know how to reload a unloaded project correctly... anymore... (which is fixed by re-opening VS and the solution)...
"If builders built buildings the way programmers wrote programs, then the first woodpecker that came along would destroy civilization." ― Gerald Weinberg
|
|
|
|
|
Kornfeld Eliyahu Peter wrote: VS consuming huge amount of memory isn't new
Versus which IDE that uses very little?
Kornfeld Eliyahu Peter wrote: I have a solution with around 80 projects in it
To me that would be an organization problem. I would break it into different solutions and if that was not possible then it would suggest different sort of problem.
|
|
|
|
|
Wordle 897 3/6*
🟩🟨⬛⬛⬛
🟩🟨🟩⬛🟩
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 897 3/6
🟩🟩⬜⬜⬜
🟩🟩⬜🟩🟩
🟩🟩🟩🟩🟩
All green 💚.
|
|
|
|
|
Wordle 897 3/6
⬛⬛🟩⬛⬛
⬛🟨🟩⬛🟨
🟩🟩🟩🟩🟩
|
|
|
|
|
⬜⬜🟩⬜⬜
🟨⬜⬜⬜⬜
🟩🟩🟩🟩🟩
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
Wordle 897 4/6
⬜⬜⬜⬜⬜
⬜⬜⬜⬜⬜
🟨🟨⬜🟩🟨
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 897 3/6
🟩⬜🟨⬜⬜
🟩⬜⬜⬜🟨
🟩🟩🟩🟩🟩
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
Wordle 897 4/6
🟩🟩⬛⬛⬛
🟩🟩⬛⬛🟩
🟩🟩⬛⬛🟩
🟩🟩🟩🟩🟩
Ok, I have had my coffee, so you can all come out now!
|
|
|
|
|
Wordle 897 4/6
⬜⬜🟩🟨⬜
⬜⬜🟩⬜🟩
⬜⬜🟩⬜🟩
🟩🟩🟩🟩🟩
|
|
|
|
|
I recently bought a new bluetooth device and it only uses Bluetooth LE. The Bluetooth adapter on my desktop is too old to connect.
So $16 later, I have an upgraded adapter that supports BT 5.0. My new device connects and works!
But now my older bluetooth devices don't connect...
clarification: They won't pair with the new adapter.
The difficult we do right away...
...the impossible takes slightly longer.
modified 2-Dec-23 14:25pm.
|
|
|
|
|
That's disturbing to hear.
|
|
|
|
|
So, all of your devices happen to connect to either BT, or BT LE exclusively...?
Can they not co-exist? Maybe installing the LT adapter disabled the older one...check Device Manager and such.
Beyond that, I'm just guessing. I've never purchased a BT device, and those that came with one, have had it disabled.
|
|
|
|
|
This morning I tried to print from my Windows desktop and Windows listed the printers I can target. Included in the list was an unknown HP printer! Checking the Control Panel and sure enough the list of printers included a HP device. Now here is the thing:
Years ago, in the days of XP, I bought a HP scanner. When Windows 7 came out, the scanner driver was incompatible with 7 and HP refused to provide a driver for Win 7. So since that time HP products were banned from our house. There is no HP printer in our house or connected to our network!
Why did Windows install a totally unknown HP printer on my machine, probably with the last update?
I managed to remove the printer from my setup, but this really p**** me off.
Ok, I have had my coffee, so you can all come out now!
|
|
|
|
|
Are you connected via rdp to somewhere, or were you at some recent before? Modern windows will attempt to autocreate printer it finds on the remote lan.
Barring That, get a mac.
|
|
|
|
|
The first thought of mine was also printer redirection by RDP
|
|
|
|
|
No. No connections via rdp.
Ok, I have had my coffee, so you can all come out now!
|
|
|
|
|
There was an article in yesterday's CP daily news about the last Windows update installing some HP software even when there was no HP hardware present. MS said they were looking into it. Maybe your new phantom printer was added with that update, perhaps with some additional HP software.
|
|
|
|
|
FreedMalloc wrote: perhaps with some additional HP soft malware. FTFY
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|