|
I had some errors with older device and fast (too fast) copy, with modern devices the quality is mostly depends on the media and not on the device...
Few advises:
1. Use high quality media if the content is important.
2. Wait a bit more for the copy and use copy speed supported both by the media and the device...
3. Give the copy software enough resources to run - waiting can go wrong.
4. If it can be avoided do not use media like hard disk - write it once...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
It was a common problem in the old times when buffer under runs were a common reason for creating coasters.
Nowadays most (probably all) writers have buffer underrun protection, where the writer is able to shut the laser and restart writing where it failed.
|
|
|
|
|
While buffer underruns is a problem of the past, it's still possible to burn a DVD, not get any error, but then still fail to read it back.
Personally, whenever I need to make sure a DVD I just created has no error, I put the disc in a separate drive, in another machine, and read it back from there (Select All, drag to a folder on the hard drive). If nothing else, that allows me to continue burning another DVD while the other one is busy reading the first one back. And that tends to be quicker than most burning software's Verify step. Once that's done, I'm confident the disc can be read back with a drive independently of the one that created it.
[Edit] I always buy 8x DVDs but never burn at more than 4x.
|
|
|
|
|
I must have burnt over a thousand DVDs and CDs over the past 15 years. I have had no issues that I can remember, except in the beginning, when I had regular buffer under-runs. I try to stick to Verbatim. It has never disappointed me.
Get me coffee and no one gets hurt!
|
|
|
|
|
Rather depends on what you're using them for, doesn't it? If it's a one-off copy of changeable data in its present state to be sent up with the next trip to the ISS then yes. If it's something where you can just burn another copy and get it to whoever couldn't get the original to work in less than two shakes a of a lamb's tail then no.
I am not a number. I am a ... no, wait!
|
|
|
|
|
Hi, I am a student working my way for an associate’s degree in Information technology. My main focus is computer programming and I have finals coming up, but for one class I have to do a report about what it’s like to be computer programmer. This is a little hard for me since I have no connections to anyone that is currently employed in the field.
I have come up with some questions if anyone on here would be willing to answer my questions and send them to me via email it would be greatly appreciated and I would really enjoy getting a better understanding of what the life of a programmer is really like.
There is roughly 30 questions, but feel free to answer as many as you like. When I get around to reading it and I liked what I seen then I will use it for my final project, which is an informational interview report. I will also email you back informing you that I am using you as my interviewee for the project.
My email address is xxxxxxxxxxxx@hotmail.com and I will attach a link to a Google Docs file to this post for anyone who is interested. Thanks to anyone who is willing to take the time to help me with this, it’s greatly appreciated.
modified 27-Feb-16 21:19pm.
|
|
|
|
|
Kore1322 wrote: what it’s like to be computer programmer
It's wall-to-wall chicks: Sex & Drugs & Rock & Roll, maaaaan.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
I just was on my way to warn the guy that all computer programmers are liars...I can skip that now 
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
You think we should tell him "it's indoor work with no heavy lifting"? 
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
OriginalGriff wrote: no heavy lifting
I use a special keyboard with metal plate on its bottom - that's heavy...
Every time I want to hit the computer, not only I have to lift it, but also have to crawl under my desk to actually hit it...I would not say that, this is an easy work...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
Steel toe-cap boots. Just kick the damn thing!
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Boots! 10 out of 12 months I wear sandal!!! And take them off too...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
Please, please tell me that's not "with socks"? 
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
No socks...Too hot for me...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
Yup, the chicks are all driven by hormonal impulses which compel them to offer their hot bodies to men with a high earning potential, and few earn so much as programmers. Most programmers die of sexual exhaustion, usually in their early fifties.
Will Rogers never met me.
|
|
|
|
|
Just an aside are these 'chicks' you speak of kinda like the ones from Dilbert that reside on the moon?
|
|
|
|
|
If he doesn't believe you, he can take a look at your photo. Hard to believe you're only 26.
This space for rent
|
|
|
|
|
The white is because of the intensive life style...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
Quote: When 900 years old you reach, look as good, you will not.
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
Roger Wright wrote: Most programmers die of sexual exhaustion, usually in their early fifties.
I guess I'll be living a bit longer then. 
Marc
|
|
|
|
|
Actually, my first job was just that, without the chicks. Devon! My god, I don't know if wales is the same, but the locals are a wild bunch!
|
|
|
|
|
Feel free to send me the link via email (in my sig).
/ravi
|
|
|
|
|
Kore1322 wrote: When I get around to reading it
Sounds like you'll make an excellent programmer.
|
|
|
|
|
I recently tried out UVI workstation (MIDI based virtual instrument software) and was impressed enough that I went out and bought a mid-priced (but with great feel) 88-key e-piano, MIDI to USB cable, and an additional suite of sounds from UVI. (you don't get full editing capabilities with the sample sounds, which is mainly what I'm after)
So, after getting it all setup and working, I notice that I can't get the attack/punch that I'm expecting. The problem seems to be latency. I tried it on 3 pretty fast PCs to rule out a crappy sound card as an issue. The results are all similar...about a tenth of a second from pressing a key until the speaker gets the signal. It's actually very similar to the reason I quit playing my bass guitar through the line in jack. It worked great until I moved to a new rig with Win7. After failing to get that to work, I was forced to find a place for a half-stack in my home office. It works, but I miss the ability to use headphones. 
Sorry, I've gotten off topic, so back to it. Unfortunately, it seems that typical PC sound cards are just not up to the task of delivering sound in near real-time. Google has found something that might work but before I spend anymore on this venture, I thought maybe one of you has maybe done this before and can offer advice. What I am looking at now is this[^], a USB connected external sound card (they call them 'audio devices') that also has MIDI I/O...the idea being that this device was made for this purpose and should give acceptable results. However, nowhere in the specifications do they provide a measurement of latency. Anybody here have experience with one of these?
Hope I haven't bored you too much! Have a great weekend everybody! ![Beer | [beer]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/beer.gif)
"Go forth into the source" - Neal Morse
|
|
|
|
|
If you are using an on board sound card you can get workable latencies by installing asioforall wdm wrapper(free) and using asio mode instead of the windows default wmd or wasaipi way which are paltry.
If you get a real sound card someday you should use the manufacturer's asio drivers and not the asioforall wdm wrapper though.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
