|
The term you're looking for is "responsible disclosure".
The Linux community is always quick to rail against Microsoft for taking its sweet time to implement fixes, so given that this particular problem already has a fix, I don't think it's unfair to have these details disclosed at this point in time.
Somewhat related:
What I personally don't appreciate is the fact that a lot of vulnerabilities are now well-known, and I have a bunch of Android-based devices that never get any security update, so I'm very much at risk if I wanted to use any of those devices to do any sort of semi-important transaction. My newest device is on Android 6. At the time I concluded I only have myself to blame if I keep buying hardware that never gets security fixes, so I figured that was going to be my last. At some point after that, Google made some sort of vague promise that all devices would get upgrades no matter how laggard an OEM is. Has the situation changed? Should I believe that and spend a couple more hundred bucks again? I'd feel pretty stupid if I did without any assurance...
|
|
|
|
|
dandy72 wrote: Has the situation changed?
No
dandy72 wrote: Should I believe that and spend a couple more hundred bucks again?
No really needed
dandy72 wrote: so I'm very much at risk if I wanted to use any of those devices to do any sort of semi-important transaction
I have never used a phone to make semi important transactions yet, and I think I will never do.
I have bought a new "smartphone" not long ago, but because my old one was having hardware problems (battery dying) and to fix it would have been more expensive (apple) than what I paid for the current phone (average Samsung)
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
Nelek wrote: I have never used a phone to make semi important transactions yet, and I think I will never do.
I'm in the same boat. People trust their phones waaaaay too much. Android devices never get fixed. Apple has now been caught sending browser queries to China.
Y'know what? I'm sticking with my Windows phone. It's such a small user base, the bad buys don't bother. And yet it's still getting regular updates (despite being absolutely dead, according to the pundits)
|
|
|
|
|
I bought a Nokia with Android One this year; it gets actual system updates over the cellular network, which is pretty sweet. Beats the hell out of installing some OEM software on my PC and walking through an arcane update process that fails if you breathe wrong.
"Never attribute to malice that which can be explained by stupidity."
- Hanlon's Razor
|
|
|
|
|
What happened to "The CodeProject Insider Daily Developer News" daily emails? I always looked thru that email first thing each day but I have not seen it for quite some time. Does anyone know if this daily news email still exists?
Thank You,
Al
|
|
|
|
|
I still get mine daily. Unsubscribe/resubscribe?
|
|
|
|
|
I like having a 3D printer - I'm making a plywood box to house it; keep the cat from attacking it or covering it in fur, and fitting that with LED lights and a small extractor fan* so I need some cable clips that can glue to plywood (too thin to nail or brad) so I go searching Fleabay and Amazon.
And then realize: it's a 3D printer - print some!
So 5 minutes in Fusion 360, 11 minutes printing a sample, and it's now off making me 16 of 'em: 25mmx10, with slots to hold 3 x 1.3mm cables and 3 x 2.0mm cables. OK, it's going to take over two more hours to print them, but that's still quicker (and probably cheaper) than buying them online ...
This thing is just sooo handy!
And I've ordered a very cheap - under £2 including slow delivery - Chinese temperature gun, which I plan on dismantling and mounting it's components so I can monitor the bed temperature easily without the machine on and know when it's OK to remove the components.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
modified 15-Oct-19 11:47am.
|
|
|
|
|
The more you use it the handier it gets.
I've printed all kinds of stuff for around the house and the SO finds all kinds of things for me to print also.
Technician
1. A person that fixes stuff you can't.
2. One who does precision guesswork based on unreliable data provided by those of questionable knowledge.
JaxCoder.com
|
|
|
|
|
I've noticed!
The major print job so far was for the box: a mounting plate for DC power, switch, fan, and a 1 1/2 BSP thread for the extraction pipe.
It was quite fun to design, and definitely fun to populate and find everything fitted and worked*.
* Except the DC connector itself, which didn't fit it's mating connector properly - of course I only find out once wires are soldered to it and it's installed in the plate ... Happily I ordered three and the other two are fine.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
You haven't lived until you get 36 hours into a 3 day print and power goes out. Crap....actually language redacted!
Technician
1. A person that fixes stuff you can't.
2. One who does precision guesswork based on unreliable data provided by those of questionable knowledge.
JaxCoder.com
|
|
|
|
|
In theory, the Anycubic says it recovers and continues from where it stopped.
Do I believe that? Enough to test it? Um ... no. 
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
That happened when I had my Creality CR-10, it didn't have recovery.
But my Prusia does and it has saved my butt a couple of times but there are occasions where it doesn't work such as spikes. If power cuts cleanly then it works great!
Technician
1. A person that fixes stuff you can't.
2. One who does precision guesswork based on unreliable data provided by those of questionable knowledge.
JaxCoder.com
|
|
|
|
|
I just DuckDuckGo'd AnyCubic and went to the site.
Watched the video for the set up on the i3 Mega --- only $209 right now -- and now I want one!!!
I can't believe that for these prices you don't have to build the thing from scratch.
Which one do you have?
|
|
|
|
|
|
Bookmarked for future reference --- when I get my i3 Mega S 
Thanks!
|
|
|
|
|
Quote: the SO finds all kinds of things
Stack Overflow? 
|
|
|
|
|
RickZeeland wrote: Stack Overflow?
I don't call her that to her face, she's sensitive that way!
Technician
1. A person that fixes stuff you can't.
2. One who does precision guesswork based on unreliable data provided by those of questionable knowledge.
JaxCoder.com
|
|
|
|
|
Sweet Flo then ? 
|
|
|
|
|
i can't tell if you actually know. jic: significant other.
|
|
|
|
|
What? You expect a teensy tiny yellow polka dot bikini?
#SupportHeForShe
Government can give you nothing but what it takes from somebody else. A government big enough to give you everything you want is big enough to take everything you've got, including your freedom.-Ezra Taft Benson
You must accept 1 of 2 basic premises: Either we are alone in the universe or we are not alone. Either way, the implications are staggering!-Wernher von Braun
|
|
|
|
|
and it is only going to get better and cheaper, like TVs and Computers. A lot of companies that manufacture after market parts for repairs will not be happy, but such is life.
I am looking forward to getting my first printer after Christmas; kids come first....evidently .
I am "finally" getting into Arduino and will use it to manufacture/print circuit board cases and chassis, servo mounts, etc.
|
|
|
|
|
I don't have one and I don't know what I'd use one for except maybe to make adapters for some old lenses to more easily use them on my DSLR.
|
|
|
|
|
This is a bit like how all woodworking magazines have endless articles about things you can do in your home woodshop to improve it, keep it tidy, etc.
They have so many of those types of articles a casual reader might think if you didn't have that hobby in the first place, you wouldn't need to spend so much time doing that sort of thing...you'd swear that's all people do in their woodshops...very meta. 
So here's a challenge: Design and 3D-print your own 3D printer...
|
|
|
|
|
Nope. That needs metal, not plastics: you are talking about very fine control of movement, and any lack of rigidity shows up as nasty defects in the print quality. You could get away with some bits, but you do need precision metalwork for the X, Y, and Z drivers.
As an aside, have a look here: Fixed Gantry CNC Router Build Part 1 - YouTube[^] - it's a "metalworking 3D printer" being built from scratch (by a very talented individual). It should help to explain some of the problems with printing a printer!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Right. But can you buy any of those components as spare parts, and 3D-print the rest...? I genuinely wonder how cost-effective that would be...
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
