|
Anonymous wrote:
Someone mentioned in earlier post about using translate function for DragDractRect but I can't seem to find the function.
It's a member of the CDC class.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
I have look through but I can't find the function that does the translation
|
|
|
|
|
Hmm! I have never used DrawDragRect(), but your question implies that you have a scrolling problem and not a drawing problem. This sounds like you want the window to scroll, much like the window scrolls when you are trying to select more text (w/mouse) than you can actualy see (automatic scrolling). You have to issue the scroll command your self when the edge of the rectangle reaches the edge of the window you want it to scroll. The best way to do this, that I have used, is to start a timer and check the edge position in the timer function and have it issue the scroll commands (based on the edge position). The reason you would use a timer is because, if you do not, it would scroll way to fast.
You might look for articles on simple text editors to see how they are handling the scrolling when a user is dragging a mouse.
Good Luck!
INTP
"The more help VB provides VB programmers, the more miserable your life as a C++ programmer becomes."
Andrew W. Troelsen
|
|
|
|
|
I've already found quite some "niceties" regarding VC6 and function templates (template parameter must occur as argument, and template over type rather than typename isn't resolved correctly).
I found new one, that boils down to:
<br />
template <typename CHAR, typename STRLEN> void Foo(CHAR const * p, STRLEN lenFunc, size_t charsize)<br />
{ ... };<br />
<br />
Foo("Hello", strlen, 1);<br />
Foo(L"Hello", wcslen, sizeof(wchar_t);<br />
I haven't reproduced this in minimum code yet, but it's pretty obvious that the compiler (sometimes) uses just the wchar_t overload for both branches.
Q:
- is this valid code under the piercing eyes of the C++ standard?
- Is this a known problem for VC6?
- Is something known about VC7 / other compilers?
we are here to help each other get through this thing, whatever it is Vonnegut jr.
boost your code || Fold With Us! || sighist | doxygen
|
|
|
|
|
Are you sure that the problem is not caused by the fact that Windows headers define CHAR according if Unicode or MBCS is set ?
Try changing the typename in the template to something that is not so "reserved" as CHAR is. Like 'TYPE_CHAR' and 'TYPE_STRLEN', for example. If the compiler still produces wchar_t overloads, then it might be a bug.
As for the questions.
- Like stated, overloading the CHAR typedef can be a bad mistake. Most compilers have in-built definitions for CHAR. Many of them resolve to 8-bit integer values, but some specific compilers (such as mobile device/mobile platform ones) might produce a different result. In eyes of the C++ standard, the code is correct, though, as 'CHAR' is not a base type, but 'char' is.
- Unknown. You could try posting this as a bug suggestion to Microsoft and see what they reply. Most possibly the reply is a suggestion to move into a newer programming environment.
- Unknown. Visual Studio compilers are aimed at producing Windows and Windows Embedded code. Because ANSI/ISO Standard doesn't support stuff like multithreading, many of these compilers are not entirely standard compliant. Make no mistake, this is due to the lacking standard, not due to Microsoft's ineptness in following the standard.
-Antti Keskinen
----------------------------------------------
"If we wrote a report stating we saw a jet fighter with a howitzer, who's going to believe us ?"
-- R.A.F. pilot quote on seeing a Me 262 armed with a 50mm Mauser cannon.
|
|
|
|
|
OK, I'll try renaming them (although CHAR works fine for other templates).
I'll see if I can reproduce that in VC6 in an minimum environment, and if if so, try VC7.
we are here to help each other get through this thing, whatever it is Vonnegut jr.
boost your code || Fold With Us! || sighist | doxygen
|
|
|
|
|
Hi everybody,
I've got a strange behavior with my code.
I have a dialog-based program, which opens another dialog (modal) when the user click on the right menu item.
There, OnInitDialog() is called before the new dialog is displayed, and it it there where I initialize my dialog depending on how the dialog was created.
I do a set of LoadString() to display the texts of the dialog in the correct language. but after loading the strings, SetWindowText() crashes.
here is the code :
Call of the new dialog :
<font color=#0000FF>void</font> CFactEditorDlg::OnFileOpen() {
COpenFilesDlg dlg(m_strDBFile, m_strDestFile);
<font color=#0000FF>if</font> (dlg.DoModal() == IDOK) {
<font color=#008000>
}
}
New dialog's initialisation :
BOOL COpenFilesDlg::OnInitDialog() {
CDialog::OnInitDialog();
<font color=#008000>//...</font>
CString strWindowText;
strWindowText.LoadString(IDS_OFD_FACT_RECSTAT); m_psrFact->SetWindowText(strWindowText);
strWindowText.LoadString(IDS_OFD_DB_RECSTAT); m_psrDataBase->SetWindowText(strWindowText);
strWindowText.LoadString(IDS_OFD_PROMPT); m_psFactPrompt->SetWindowText(strWindowText);
m_psDBPrompt->SetWindowText(strWindowText);
<font color=#FF0000>-></font> strWindowText.LoadString(IDS_OFD_PREVIEW_BTN); m_pbPreviewFact->SetWindowText(strWindowText);
<font color=#008000>//...</font>
}
The real place having problem :
<font color=#0000FF>void</font> CWnd::SetWindowText(LPCTSTR lpszString) {
<font color=#FF0000>-></font> ASSERT(::IsWindow(m_hWnd));
<font color=#0000FF>if</font> (m_pCtrlSite == NULL)
::SetWindowText(m_hWnd, lpszString);
<font color=#0000FF>else</font>
m_pCtrlSite->SetWindowText(lpszString);
}
what does it mean ???
few day ago, this code was working well, and today, when i was updating another class of the program (which have no relation of any order with this one), it stops me there now...
can anyone help of any kind please ?
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
Is m_pbPreviewFact mapped to a valid control? In other words, you've probably got a DoDataExchange() method that looks similar to:
void COpenFilesDlg::DoDataExchange(CDataExchange* pDX)
{
CDialog::DoDataExchange(pDX);
DDX_Control(pDX, SOME_ID_HERE, m_pbPreviewFact);
}Look to make sure that SOME_ID_HERE is in the project's resource.h file with a unique number, and that it is also in the dialog's template in the project's .rc file.
toxcct wrote:
few day ago, this code was working well, and today, when i was updating another class of the program (which have no relation of any order with this one), it stops me there now...
What happens if you remove this class? Does the SetWindowText() call start working again?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
yes it does.
i put comments in the code sample, but before i do this into OnInitDialog(), I do :
pbPreviewFact = (CButton*)GetDlgItem(IDC_PREVIEW_BTN); i don't understand... the assert failure is like pbPreviewFact is not a window, but it actually is... !
the worst is that i didn't even modify this class !!!
I was only working on another new dialog, with no relationship with this one...
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
i have another strange fact :
if i move the line (in my code) that is giving me an error, i still have an error at the same line !!!, that means on another code line !  any idea ?
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
Comment out each of the SetWindowText() statements and recompile. Does the problem go away? If so, remove the comment from each statement individually and see which causes the problem to start.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Also try "rebuild all." One of my pet peeves with VC6 is that it will not allow one to make Resource.h a dependency. That thoroughly annoys me. I can understand the rationale to not want it to be but to prohibit it from being one is stupid I think.
|
|
|
|
|
|
Rick York wrote:
One of my pet peeves with VC6 is that it will not allow one to make Resource.h a dependency.
In all of my projects, resource.h is indeed in the dependency list. What am I missing here?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Does anyone know of a good piece of code for formating phone numbers. By good, I mean formating based on country code (at the very least). Most of the hits I am seeing, on the WWW, seem to think it is pretty neat to be able to format a US phone number, but any programmer can do that (if someone cann't, there not a programmer).
Thanks for any help!
John R. Shaw
 "If I was at home, I would not be Anonymous."
|
|
|
|
|
See the discussion here.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Thanks David, thats about what I thought!
According to every thing I have now read even Microsoft cann't do it, except for certain countries with fixed formats (and problems may occur even for those). There is no garantee that any format will not change in the future; thereby breaking code depending on it.
John R. Shaw
"If I was at home, I would not be Anonymous."
|
|
|
|
|
Hi,
I'm havin a silly problem with a scroll bar. It works but it never scrolls all the way to the maximum range value.
For example here's the code:
<br />
SCROLLINFO ScrollInfo;<br />
ScrollInfo.cbSize = sizeof(ScrollInfo); <br />
ScrollInfo.fMask = SIF_ALL; <br />
ScrollInfo.nMin = 0; <br />
ScrollInfo.nMax = 125<br />
ScrollInfo.nPage = ScrollInfo.nMax / 10;<br />
ScrollInfo.nPos = 0;<br />
ScrollInfo.nTrackPos = 0; <br />
m_ImageHorizontalScroll.SetScrollInfo(&ScrollInfo); <br />
int result = m_ImageHorizontalScroll.SetScrollPos(10);
result = m_ImageHorizontalScroll.SetScrollPos(123);
result = m_ImageHorizontalScroll.GetScrollPos();
So I have to set the nMax to my value + a fudge number? What should that number be?
Thanks.
|
|
|
|
|
I have this code to change screen resolution, and it works for win98/2000
but it does not work for WinXP knowing that i log in as Administrator.
<br />
DEVMODE dm;<br />
dm.dmFields=DM_PELSWIDTH|DM_PELSHEIGHT;<br />
dm.dmPelsHeight=600;<br />
dm.dmPelsWidth=800;<br />
ChangeDisplaySettings(&dm,0);
can anybody tell me whats wrong with this code, or another way that may work?
thanx all
Mohammad
A candle looses nothing by lighting another candle
|
|
|
|
|
Mohammad A Gdeisat wrote:
but it does not work...
What does ChangeDisplaySettings() return?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
thanx DavidCrow,
the strange thing is that ChangeDisplaySettings(...) returns DISP_CHANGE_SUCCESSFUL, and ofcourse, i dont see any results on my screen.
have any info?
thank you very much
Mohammad
|
|
|
|
|
I have this class declared as
-------------------------------------------------------------------
class CMyArray : public CTypedPtrArray< CObArray, CMyDataClass* ><br />
{<br />
public:<br />
...<br />
CMyArray();<br />
virtual ~CMyArray();<br />
protected:<br />
...<br />
};
-------------------------------------------------------------------
where the CMyDataClass is declared as
-------------------------------------------------------------------
class CMyDataClass:public CObject<br />
{<br />
public:<br />
CMyDataClass( );<br />
virtual ~CMyDataClass( );<br />
... <br />
protected:<br />
... <br />
};
-------------------------------------------------------------------
Upon compile I get this error:
error C2653: 'CMyArray' : is not a class or namespace name
What?! The strangest thing is that I have other classes defined in the exact same way, compiling without problems.
I searched the documentation using the error code for keyword and found some vague references to this being a known bug, but I could not work out a solution from the text. Obviously, I am doing something wrong with the CMyDataClass, since I do get the exact same construction to work with other generic classes.
------------------------------------------------------------
"Pooollyyy!! ...Polly Parrot! Wakey-wakey!"
|
|
|
|
|
I am using folowing code to insert BMP in RichEdit.
InsertPlotBitmap(CString szFileName)
{
USES_CONVERSION;
SCODE sc = ::CreateILockBytesOnHGlobal(NULL, TRUE, &m_lpLockBytes);
if (sc != S_OK)
AfxThrowOleException(sc);
ASSERT(m_lpLockBytes != NULL);
sc = ::StgCreateDocfileOnILockBytes(m_lpLockBytes,
STGM_SHARE_EXCLUSIVE|STGM_CREATE|STGM_READWRITE, 0, &m_lpStorage);
if (sc != S_OK)
{
VERIFY(m_lpLockBytes->Release() == 0);
m_lpLockBytes = NULL;
AfxThrowOleException(sc);
}
// CString szFileName=strSmile;
// attempt to create the object
sc = ::OleCreateFromFile(CLSID_NULL, T2COLE(szFileName),
IID_IUnknown, OLERENDER_DRAW, NULL, NULL, m_lpStorage, (void **) &m_lpObject);
if ( sc != S_OK )
{
TCHAR * lpMsgBuf;
::FormatMessage( FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM, NULL,
::GetLastError(),
MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
(LPTSTR) &lpMsgBuf, 0, NULL );
CString msg( lpMsgBuf );
msg += _T("\n\n\n" );
msg += szFileName;
AfxMessageBox( msg, MB_OK );
::LocalFree( lpMsgBuf );
return;
}
// m_lpObject is currently an IUnknown, convert to IOleObject
if (m_lpObject != NULL)
{
LPUNKNOWN lpUnk = m_lpObject;
m_lpObject = QUERYINTERFACE(lpUnk, IOleObject);
lpUnk->Release();
if (m_lpObject == NULL)
AfxThrowOleException(E_OUTOFMEMORY);
}
// cache the IViewObject interface
m_lpViewObject = QUERYINTERFACE(m_lpObject, IViewObject2);
if (m_lpViewObject == NULL)
return;
// setup for advises; we assume that OLE cleans them up properly
LPADVISESINK lpAdviseSink =
(LPADVISESINK)GetInterface(&IID_IAdviseSink);
// set up view advise
VERIFY(m_lpViewObject->SetAdvise(DVASPECT_CONTENT, 0, lpAdviseSink)
== S_OK);
// the server shows these in its user-interface
// (as document title and in File Exit menu)
m_lpObject->SetHostNames(T2COLE(AfxGetAppName()),
T2COLE(_T("Test")));
// all items are "contained" -- this makes our reference to this object
// weak -- which is needed for links to embedding silent update.
OleSetContainedObject(m_lpObject, TRUE);
// CHARRANGE cr;
//m_Ctrl_RichEdit.GetSel( cr );
//cr.cpMin = cr.cpMax -1;
//m_Ctrl_RichEdit.SetSel( cr );
REOBJECT reo;
memset( &reo, 0, sizeof( reo ) );
reo.cbStruct = sizeof( reo );
CLSID classID;
if ( m_lpObject->GetUserClassID( &classID ) != S_OK)
classID = CLSID_NULL;
reo.clsid = classID;
reo.cp = REO_CP_SELECTION;
reo.poleobj = m_lpObject;
reo.pstg = m_lpStorage;
LPOLECLIENTSITE lpClientSite;
GetIRichEditOle()->GetClientSite( &lpClientSite );
reo.polesite = lpClientSite;
SIZEL sizel;
sizel.cx = sizel.cy = 0; // let richedit determine initial size
reo.sizel = sizel;
reo.dvaspect = DVASPECT_CONTENT;
reo.dwFlags = REO_RESIZABLE;
reo.dwUser = 0;
HRESULT hr = GetIRichEditOle()->InsertObject( &reo );
}
This code works fine if i call from same window.But it gives error if i invoke from another dialog it gives error in the following line .
GetIRichEditOle()->GetClientSite( &lpClientSite );
can any body help me .
Learner always
|
|
|
|
|
rver wrote:
But it gives error...
And what would that error be?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
It Gives "Assertion Failed" in following function
IRichEditOle* CRichEditCtrl::GetIRichEditOle() const
{
ASSERT(::IsWindow(m_hWnd));
...
}
As in this it cannt get m_hWnd is 0x00000000.
Learner always
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
