|
Now i want to read file from server to CString Buffer and now i can do that But
When i call my function again, it not work But i exit my program i can do that again Please Help me!!!
When i call this function
i call "GetFileToBuffer(m_serverName, getObject, getHeader, getFile);"
With m_serverName = "204.188.96.251";<- This is assume ip ; )
getOpject = "test/Palm/text.xx";
getHeader = "";
getFile = NULL;
and my function coding is
void CWeb::GetFileToBuffer(const CString & ServerName,
const CString & strObject,
const CString& strHeaders,
CHttpFile * & pFile)
{
m_serverName = "216.188.96.251";
INTERNET_PORT nPort = INTERNET_DEFAULT_HTTP_PORT;
if (m_serverName != ServerName)
{
// Picked a new server, close out connection and make a new one:
if (m_pServer)
m_pServer->Close ();
delete m_pServer;
m_pServer = NULL;
}
if (m_pServer == NULL)
{
m_pServer = m_pSession->GetHttpConnection(ServerName, nPort);
m_serverName = ServerName;
}
pFile = m_pServer->OpenRequest(CHttpConnection::HTTP_VERB_GET,
strObject, NULL,1, NULL, NULL, INTERNET_FLAG_EXISTING_CONNECT);
pFile->AddRequestHeaders(strHeaders);
TRY{
pFile->SendRequest();
}
CATCH_ALL(e){
TCHAR szCause[255];
e->GetErrorMessage(szCause, 255);
}
END_CATCH_ALL
CString buffer;
while(pFile->ReadString(buffer) != NULL);
}
|
|
|
|
|
Hi all,
I am writing a setup application, which has to exchange some third-party libraries. Unfortunately, these libraries are loaded during my setup. Therefore, I want to exchange the files at the next boot.
Some time ago, I have read about a shell function, which stores the files in a temporary folder, writes the appropriate information into the registry, and Windows will read this information at next boot time and move the files to their proper destination folder. My problem is, that I cannot find this function anymore. I suspected SHFileOperation, but the docs do not give any hints. Can anyone help me?
Thanks in advance,
Thomas
|
|
|
|
|
I don't know about the Shell function but I do know that you can use the MoveFileEx function with the MOVEFILE_DELAY_UNTIL_REBOOT flag to do what you need.
Regards,
Alvaro
|
|
|
|
|
This only works on NT, though. On Win 9x you need to write entries to the WININIT.INI file to replace files at the next boot.
|
|
|
|
|
Dear Developer
I'm developing webbrowser using CHtmlView.
But i don't know handler that received WM_PAINT message.
For example
LRESULT CMainFrame::WindowProc(UINT message, WPARAM wParam, LPARAM lParam)
{
// TODO: Add your specialized code here and/or call the base class
if( message == WM_NOTIFY ||
message == WM_PAINT ) {
// paint code here
}
}
return CFrameWnd::WindowProc(message, wParam, lParam);
}
Above example does not repaint properly.
For example "Scroll event"
When i draw in my program and scroll the window then doesn't repaint.
Please help.
Thanks in advance
dooly
|
|
|
|
|
The CHtmlView is just a container for the WebBrowser control .To intercept the events you must connect to the events of the HTML document that is displayed in the control .Also , you can intercept some messages via WM_NOTIFY .
|
|
|
|
|
Hi
Thanks for your reply.
But i don't know how connect to the event.
Have you some sample code?
Or Have you method to catch scrollbar event?
Thanks in advance again.
dooly
|
|
|
|
|
check this address :
http://msdn.microsoft.com/workshop/c-frame.htm?/workshop/browser/default.asp
You can catch all the events for an DHTML object , so you can handle the scroll event also ( this event is received by the BODY element )
|
|
|
|
|
Hello,
No doubt everyone knows there's a fine utility in the Visual C++ Add-In sample directory, called AutoBld Add-In. I'm currently adapting this DLL to be used in our development environment.
One of the options of that DLL, is sending a mail with the results (amount of errors/warnings) of the different compilations done. I do, however, want to have more information into that mail message. I also would like to have the output of the Build tab in my message.
Does anyone know how to 'grab' the output of that Build window? Is there a possibility via the Application object (like you have e.g. the properties 'Errors' and 'Warnings') or is there another way to do it?
Since this is my first 'touch' with COM-alike stuff, any help would be highly appreciated.
Thanks very much in advance,
Best regards,
Geert
|
|
|
|
|
Hi
I am finding a way to read text from that windows too.
But I wrote my own add-in that may be resolve your problem
visit http://zmanagers.chat.ru and look how I send build output to "macros" window
Zmike
|
|
|
|
|
Hi,
I am trying to use the map data structure of the STL.
When I declare the map, map<int,int> var , I get all sorts of warnings
(something like 92 of them) saying that some names are longer than 255
characters. Can someone please tell me how do get rid of these warnings?
For your information, here is a few of those warnings:
d:\vc98\include\utility(21) : warning C4786: 'std::reverse_bidirectional_iterator<std::_tree<int,std::pair<int const="" ,int="">,std::map<int,int,std::less<int>,std::allocator<int> >::_Kfn,std::less<int>,std::allocator<int> >::iterator,std::pair<int const
="" ,int="">,std::pair<int const="" ,int=""> &,std::pair<int const="" ,int=""> *,int>' : identifier was truncated to '255' characters in the debug information
d:\vc98\include\utility(21) : warning C4786: 'std::reverse_bidirectional_iterator<std::_tree<int,std::pair<int const="" ,int="">,std::map<int,int,std::less<int>,std::allocator<int> >::_Kfn,std::less<int>,std::allocator<int> >::const_iterator,std::pair<int
const="" ,int="">,std::pair<int const="" ,int=""> const &,std::pair<int const="" ,int=""> const *,int>' : identifier was truncated to '255' characters in the debug information
d:\vc98\include\utility(21) : warning C4786: 'std::pair<std::_tree<int,std::pair<int const="" ,int="">,std::map<int,int,std::less<int>,std::allocator<int> >::_Kfn,std::less<int>,std::allocator<int> >::iterator,std::_Tree<int,std::pair<int const="" ,int="">,std:
:map<int,int,std::less<int>,std::allocator<int> >::_Kfn,std::less<int>,std::allocator<int> >::iterator>' : identifier was truncated to '255' characters in the debug information
d:\vc98\include\utility(21) : warning C4786: 'std::pair<std::_tree<int,std::pair<int const="" ,int="">,std::map<int,int,std::less<int>,std::allocator<int> >::_Kfn,std::less<int>,std::allocator<int> >::const_iterator,std::_Tree<int,std::pair<int const="" ,int
="">,std::map<int,int,std::less<int>,std::allocator<int> >::_Kfn,std::less<int>,std::allocator<int> >::const_iterator>' : identifier was truncated to '255' characters in the debug information
Draggable.cpp
DrawUndo.cpp
|
|
|
|
|
#pragma warning(disable:4786)
|
|
|
|
|
I have created a Dialog based application. I want it to have a menu with the standard things like "File" with
"Open", "New", "Save" and "Save As." I would like to use the defaults of these functions which come up in the
Document based programs. Is there any way to import or implement these into my current program? Thanks.
Ryan
|
|
|
|
|
There are two answers to your questions. The simple answer to your direct quesion is that yes it is possible. See "TN022: Standard Commands Implementation".
Unfortunately, though, the answer to your less direct question is that it is not possible, since the Standard Commands require the document/view architecture.
|
|
|
|
|
Hi,
I have a vertical slider control in my dialog. The maximum
value appears at the bottom and the minimum appears at the top. How can I change it, so the minimum value will be at the bottom and the maximu at the top ?
Thanks,
Shai
|
|
|
|
|
I assume that you have a contol variable associated with this slider (m_slider), and that when it changes you set the value of some variable using
int user_value = m_slider.GetPos();
To "flip" the min and max ... just do the following:
int user_value = m_slider.GetRangeMax() +
m_slider.GetRangeMin() -
m_slider.GetPos();
|
|
|
|
|
I have the following snippet of code in two places in my MFC Appwizard-generated MDI (CFormView) application:
MSIHANDLE hMSIDatabase;
::MsiOpenDatabase( _T( "D:\\Projects\\MSIMaker\\UISample.msi" ), MSIDBOPEN_TRANSACT, &hMSIDatabase );
::MsiCloseHandle( hMSIDatabase );
The two places are in the CWinApp-derived class' Constructor, and the other is in an OnInitialUpdate of my CFormView-derived class. The first one, in the constructor, works great.
The second one, however, always fails with a return code of "110", and sets the GetLastError() value to "ERROR_INVALID_PARAMETER".
This only seems to occur after MFC is totally initialized and all of the Windows are created. Strange, but true. It continues to fail if I remove the first one.
The sample applications provided with the Installer SDK are all Console apps. Is that trying to tell me something?
Has anyone else out there experienced anything like this?
Peace!
-=- James.
|
|
|
|
|
My developer studio is extremly slow in the moment.
I am waiting about 1 minute when inserting a line into the code.
What can I do?
Thank you...
|
|
|
|
|
Try closing down DevStudio and then deleting your "Project.NCB" file.
Let me know if that works.
Alvaro
|
|
|
|
|
Did you try the Task Manager to determine "who" is using the processor? It could be another task entirely. Sometimes I have programming bugs that cause my program to get hung up without terminating but without a window. In situations like that, the program could be using up the processor. There are many other possibilities too.
|
|
|
|
|
Hello!
Can anyone tell me that how can I disable left/right click from Microsoft web browser control in an MFC dialog based application? Is there any easy method to catch WM_LBUTTONDOWN/WM_RBUTTONDOWN events on web control?
Regards
Muhammad Atif
|
|
|
|
|
from the script you could do :
function inhibeClick()
{
window.event.returnValue = false;
}
document.onclick=inhibeClick;
document.oncontextenu=inhibeClick;
the "oncontextmenu" event is avaible only in IE5
from c++, your application that host the WebBrowser control must implement IDocHostUIHandler . for the context menu ( right click ) use the ShowContextMenu from the IDocHostUIHandler interface.
to inhibe the left click , connect to the HTML document events ( using AfxConnectionAdvise ) , and do the same thing like in the script function described : set the returnValue property of the event object to false.
|
|
|
|
|
Hi,
I am developing using VC6.0 SP3 on W2K RC3.
I want to print an euro symbol on a CDC object: eventually it will be a printer CDC object, for now it is a CClientDC object on a dialog.
I can input euro symbol on notpad and here(€, hold down right Alt and enter 0128 using numeric pad), but I cannot do that in VC. I know SP4 will fix this problem. But I would like to know whether there are other solutions. For now, I just use a bitmap to work around it.
Any helps and tips are appreciated.
Barry
|
|
|
|
|
Hello,
I'm making an application for reading out and setting up an external hardware unit.
Because it should work also on CE, I start of with a SDI application. The application should be made ready to work with all the different hardware units we already have and are planning to make. Therefore different views for the different units.
I checked the example COLLECT of MSDN to see how you can switch between Views.
Because one unit has a lot of different readings and settings, I have to make seperate "views" for them as well. My first idea was to use a tabbed view like propertysheet / pages.
I checked how propertysheets work in a dialog-based application.
My question and my problem is that I don't know how to incorparate the two things. Where and how do I declare the propertysheet and pages to show them in a view?
Probably somewhere in a OnCreate or OnInitialUpdate, but what if I choose to change the view during runtime?
Going the whole way with CTabCtrl doesn't seem to be that easy,because e.g. you have to handle a lot of messages yourself what is done for you with propetysheet and the easy use of resource editor when using the property sheet (that's what I understood after reading some documentation
about this in the newsgroups and on the guru-sites). I maybe wrong, but the Fire example in MSDN shows me all kind of things that are not necessary with property sheet.
Can somebody help me with some directions / info / documentation / tutorial / samples
By the way:
When I started to learn about MFC I think saw somewhere that propertysheets in WinCE are always MODAL. I can't find it anymore, so maybe somebody can tell me.
Thanks in advance,
Kimball
|
|
|
|
|
Hi all,
for now i have a browser in action and i want to hook that browser
from my app to get text in a text box of web page. I retried many times,
but only successfuly get when embed CHTMLView into my app. If anyone
have a solution to solve this, please send it to me (or sourcecode is very good).
thank you for your feedback.
best regards,
hquoc
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
