|
Thank you very much for your information. I also used to heard that cell phone can cause the problem to user health. How about wireless networking in home or office? Does its signal could affect to the user health?
|
|
|
|
|
My Dad has just applied this and now cannot access the Internet. What are some likely causes? Unfortunately, I can only help him out over the phone at the moment. I will also do a web search, but in the meantime, any suggestions?
He's also running Norton Internet Security 2004, which I strongly suspect is doing something strange. One possibility is that Norton Firewall has blocked IE. I do find that occasionally Norton blocks things which were previously allowed and you have to unblock them again. But I've not had the chance to guide him through checking the Norton settings yet. Also, is there a problem having both Windows Firewall and NortonFirewall enabled?
Kevin
|
|
|
|
|
|
We've managed to do a system restore to pre-SP2, so he's up and working again. I guess at some point he'll have to move to SP2. In the meantime he should be OK with other MS patches.
The KB article is rather skimpy on info. How do we know that NIS is affected by this?
I also saw another article that says that if you install this patch you may lock up your PC!
Kevin
|
|
|
|
|
|
I'm having some difficulty with setting up a small testing lab network. It was setup and working fine but the server hard drive had to be replaced so I did a fresh install and now...
Configuration:
Windows 2003 Standard Server(Domain Controller, AD, DHCP, DNS)
5 Windows XP Pro Workstations
1 Linksys Router
Symptoms:
All workstations can ping the server but not each other
Server can't ping any workstation
Names are resolved but gets request timeout message when trying to ping
Exception:
One workstation can be pinged and accessed by all even though it does not have a DNS record.
I took all the defaults during setup and nothing has changed on the router or workstations. There has to be something simple I missed but I can't see where the problem is. I've compared the working workstation with the others and can't see any difference. Again, the only thing that changed was putting in a new hard drive and fresh install on the server.
Anyone have a suggestion? 
|
|
|
|
|
Sounds initially like either a firewall or permissions issue to me. Can you ping the individual workstations from the server? If yes, you need to check the account permissions. Are the workstations logging ON to the domain, or only locally and using the DHCP service from the server?
HunterSvcs - If only it would work the first time :=)
|
|
|
|
|
 I forgot to check the firewalls on the clients That fixed it. Thanks
|
|
|
|
|
I'm struggling with how to set an environment variable for a DOS Window such that the variable contains embedded control characters such as carriage return and linefeed. But I can't seem to find the right way to escape it.
set BODY="Line1\nLine2"
The above always gives me the text 'Line1\nLine2' and what I really want is
Line1
Line2
Googling just seems to give me how to remove carriage returns from DOS files. 
Chris Meech
I am Canadian. [heard in a local bar]
Remember that in Texas, Gun Control is hitting what you aim at. [Richard Stringer]
Nice sig! [Tim Deveaux on Matt Newman's sig with a quote from me]
|
|
|
|
|
Hello friends, I am San
any one please tell me abt how can I trace a IP address of a system while we connect to internet.
Any method either by messenger or netmeeting.
Thanks to everybody in advance.
san4wish@hotmail.com
san4wish likes it.
|
|
|
|
|
tracert HOST usually works for me.
Google for tracert if you need more info on what it does.
Chris Meech
I am Canadian. [heard in a local bar]
Remember that in Texas, Gun Control is hitting what you aim at. [Richard Stringer]
Nice sig! [Tim Deveaux on Matt Newman's sig with a quote from me]
|
|
|
|
|
For curiosity, at what registry key do the printer drivers save their information to?
Assuming SetPrinterData or GetPrinterData from whatt physical registry location do these extract info from?
|
|
|
|
|
I have the following setup, for which I'm not sure what software/configuration I should use. I have a normal DSL router for connecting to the internet, to which a switch is connected with a number of PC's on it. One of these PC's is running Win2k3 Server, it also has 2 network cards, one connecting to the aforementioned switch and another connecting directly to a single other computer. A sort of daisy-chain if you will. My question is, without using Windows' built-in network bridge, how can I give the computer connected directly to the server access to the rest of the network and the Internet?
I've tried Kerio WinRoute, but don't know enough about routing tables etc to make it work properly... 
TIA
PS: If you need more info to be able to answer, feel free to ask!
Paul
modified 18-Jul-18 11:59am.
|
|
|
|
|
Hi, in windows xp pro, if i want to require the user to press the CTRL+ALT+DEL key i have to change the option in group policies. How could i require the user to press CTRL+ALT+DEL key in windows xp home edition?
|
|
|
|
|
I don't have an XP system handy, so I can't check it myself, but look for a similar option in local security policies.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
Thank you very much Roger, Windows xp home edition do not have the local security policies. But already found the solution in Microsoft knowledge base.
|
|
|
|
|
|
Thank you very much for your information. For the second hyperlink could be apply only to windows xp professional edition only. For the first hyperlink, i have done as an instruction but it not work. I try to type the following command control userpassword2 and press enter but there is no dialog box appear.
|
|
|
|
|
I am using a friend's computer (MS XP Home) and am trying to do some remote unix programming through it.
The following is in regards to the left shift key only. The right shift key works fine. However I dont use the right shift key so that is of little use to me.
The long and short of it is the 'Shift+\' should result in '|' which is necessary for creating "or" statements in php and C++. When I hit "Shift+\" I get the pipe symbol "|" plus a carriage return. How do I reset the keyboard programming so that shift+\ yields a pipe "|."
I do not have sticky keys, filter keys or toggle keys turned on.
Thanks
-- modified at 21:22 Monday 21st November, 2005
|
|
|
|
|
This would be dependant on the terminal app your using, not any keyboard mapping in Windows.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I have used notpad, wordpad, putty, and SSH terminal login. They all give the same result.
Additionally, the left shift key + \ will close a dialog window (much like esc or the SC_CLOSE event),...however the right shift key + \ does not add the carriage return nor does it act as an SC_CLOSE event.
|
|
|
|
|
Then you've got something else going on in your system. Perhaps some other application hooking the keyboard? A virus or trojan? A trainer for some game?
Start the machine in Safe Mode and see if it does the same thing.
There is no keyboard "mapping" to change.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi,
My name is Liran, Im working on a project that the server is written in java technology (APACHE TOMCAT) and we considering now to turn the client to windows application instead of web. Our main option is to choose .net c# as our client technology and the connection to the server will be by web services on the server side (the webservices is written in java).
I already made a prototype to check it and it worked really good.
Im trying to get some information about the risks that i need to take into consideration if i choose this option. so if someone already dealt with it ill really appriciate your help.
Best regards,
Liran
|
|
|
|
|
hi
How i can Regiter my calendar in windows?
i create a new standard calendar with c#.net
and want to force windows to use it.
can do that?
thanks alot
|
|
|
|
|
What are you talking about? Force Windows to use what?
Are you talking about replacing the Date/Time Control Panel applet? You'll have to write a new control panel app and just replace the timedate.cpl with yours.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
